Professional Documents
Culture Documents
Exercise 10
Exercise 10
Exercise 10
SMART PIPES
Copyright 2018 M.E.P.CAD. This work is the sole property of M.E.P.CAD and may not be reproduced, stored in
or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical,
photocopying, recording, or otherwise) without the prior written permission of the copyright owner.
10 - 1
10 - 2
Open Exercise 10.cad
- Welded schedule 10 cross mains, feed mains & feed risers with outlets
10 - 3
3. CLICK Pipe Group drop down menu
6. CLICK Threaded
10 - 4
Repeat Steps 5-6 for Sprigs, Branch Lines, Riser Nipples:
8. CLICK On Black
9. CLICK OK
10 - 5
Repeat Steps 7-9 for Sprigs, Branch Lines, Riser Nipples,
Cross Mains, Feed Mains, & Feed Risers
Assign End Preps for Cross Mains, Feed Main, Feed Risers, & Underground
Click here for Video
10 - 6
12. CLICK End Preps drop down
16. CLICK OK
10 - 7
17. CLICK Checkbox ON for Drops, Springs,
Branch Lines, Riser Nipples
21 22
23
10 - 8
20. CLICK Under the ‘Material’ column in the
‘Smart Pipe’ section for 1” Pipe
10 - 9
26. CLICK Under the ‘Material’ column in the
‘Smart Pipe’ section for DR
10 - 10
31. CLICK Maximum Branch Line Size drop down
menu
32. SELECT 2
10 - 11
B - Draw & Connect (2) 1” (in) “Threaded” Branch Lines Together Click here for Video
38. TYPE 10
39. CLICK OK
42. CLICK/SELECT 1
10 - 12
43. MIDDLE CLICK Anywhere in the drawing space
10 - 13
49. RIGHT CLICK In empty drawing space to end the
command
52. CLICK/SELECT 1
10 - 14
54. TYPE 3 in the Input Line
10 - 15
59. CLICK Cleanup Intersection
10 - 16
C - Draw & Connect 1¼” (in) “Threaded” Branch Line to a 2”(in) “Threaded” Branch Line
Together
Click here for Video
63. TYPE 10
64. CLICK OK
67. CLICK/SELECT 2
10 - 17
68. LEFT CLICK in the lower left-hand corner of Box C to
start drawing pipe
10 - 18
73. MIDDLE CLICK Anywhere in the drawing space
75. CLICK/SELECT 1¼
10 - 19
79. PRESS ENTER
10 - 20
D - Draw & Connect (2) 4” (in) “Grooved” Mains Together Click here for Video
86. TYPE 10
87. CLICK OK
90. CLICK/SELECT 4
10 - 21
91. LEFT CLICK in the lower left-hand corner of Box D to
start drawing pipe
10 - 22
96. MIDDLE CLICK Anywhere in the drawing space
98. CLICK/SELECT 4
10 - 23
102. PRESS ENTER
10 - 24
E - Draw & Connect a 2½” (in) “Grooved” Main to a 3”(in) “Grooved” Main Together
Click here for Video
109. TYPE 10
110. CLICK OK
113. CLICK/SELECT 3
10 - 25
114. LEFT CLICK in the lower left-hand corner of Box E to
start drawing pipe
10 - 26
119. MIDDLE CLICK Anywhere in the drawing space
121. CLICK/SELECT 2½
10 - 27
125. PRESS ENTER
10 - 28
129. SELECT 3 x 2½ - Groove-O-Let in
Harmonization Choice
130. CLICK OK
10 - 29
F - Draw & Connect an 1½” (in) “Threaded” Branch Line to a 6”(in) “Grooved” Main
Click here for Video
134. TYPE 10
135. CLICK OK
138. CLICK/SELECT 6
10 - 30
139. LEFT CLICK in the lower left-hand corner of Box F to
start drawing pipe
10 - 31
144. MIDDLE CLICK Anywhere in the drawing space
146. CLICK/SELECT 1½
10 - 32
150. PRESS ENTER
10 - 33
Save the drawing
End of Exercise 10
Zoom ISO
View Properties
Window
10 - 34