Professional Documents
Culture Documents
Assem
Assem
-:Introduction
Early paint robots were hydraulic versions - which are still in use today
but are of inferior quality and safety - to the latest electronic offerings. [1]
[2] [3] The newest robots are accurate and deliver results with uniform
.film builds and exact thicknesses
]2[
Operation
Spray Coating: Spray coating makes use of a spray gun directed at the
object to be coated. Paint flows through the nozzle of the spray gun to be
.dispersed and applied over the surface of the object
Applications
]3[
Types
Cost
Introduction
There are many types of sprayers in the market like knapsack sprayer, rocker sprayer,
centrifugal rotary disc type sprayer, foot sprayer, tractor mounted sprayer, etc. Present
work aims at developing a new method of spraying technique called as "Multi nozzle,
multi pump wheel driven pull type sprayer" which will perform spraying at maximum
rate in minimum time.The equipment is wheel operated in turn operating the pump
and spraying of the liquid at the back of the worker hence avoids contact with the
liquid and reduces health hazards. Fig[1]
Fig [1]
Advantages Disadvantages
Work by just moving- Low pressure spray-
Reduce using the water- Take a lot of time-
Zero emissions- Can`t cover a big area-
-Not electrical bill The tank is not big so need water -
every piece of time
Operation
The operator grabs the handle and pushes the cycle forward as cycle moves forward, .
the wheel rotate. When the wheel rotates then the gear sprocket mounted on wheel is
also rotate at same speed. The chain drive transfers the motion of gear sprocket to
pinion sprocket. The pinion sprocket and crank is mounted on either side of same
shaft, the rotary motion of shaft is converted into the reciprocating motion with the
help of crank and connecting rod mechanism. The connecting rod is also connected
with lever and then the lever oscillates at fulcrum