Professional Documents
Culture Documents
Az1084s2 Adje1
Az1084s2 Adje1
The AZ1084 is a series of low dropout positive voltage · Low Dropout Voltage: 1.3V Typical at 5A
regulators with a maximum dropout of 1.5V at 5A of · Current Limiting and Thermal Protection
load current. · Output Current: 5A
· Current Limit: 6.5A
The series features on-chip thermal limiting which pro-
vides protection against any combination of overload · Operating Junction Temperature Range: 0 to
and ambient temperatures that would create excessive 125oC
junction temperatures. It also includes a trimmed band- · Line Regulation (Adj Version): 0.015% (Typical)
gap reference and a current limiting circuit. · Load Regulation (Adj Version): 0.1% (Typical)
Datasheet.Live
TO-263-3 TO-263-2 TO-220-3
1
Data Sheet
S Package S2 Package
(TO-263-3) (TO-263-2)
3 INPUT 3 INPUT
2 OUTPUT 2 OUTPUT(TAB)
1 ADJ/GND 1 ADJ/GND
D Package
(TO-252-2 (1)) (TO-252-2 (2))
3 INPUT 3 INPUT
2 OUTPUT 2 OUTPUT
1 ADJ/GND 1 ADJ/GND
3 INPUT 3 INPUT
2 OUTPUT 2 OUTPUT
1 ADJ/GND 1 ADJ/GND
T Package
(TO-220-3)
3 INPUT
2 OUTPUT
1 ADJ/GND
2
Data Sheet
3
INPUT
Thermal -
Protection +
2
OUTPUT
3
Data Sheet
AZ1084 -
4
Data Sheet
BCD Semiconductor's Pb-free products, as designated with "E1" suffix in the part number, are RoHS compliant. Products with
"G1" suffix are available in green packages.
5
Data Sheet
TO-263-2 60
TO-263-3 60
θJA oC/W
Thermal Resistance (Note 2) TO-220-3 60
Note 1: Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the
device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond
those indicated under"Recommended Operating Conditions" is not implied. Exposure to "Absolute Maximum
Ratings" for extended periods may affect device reliability.
Note 2: Absolute maximum ratings indicate limits beyond which damage to the component may occur. Electrical
specifications do not apply when operating the device outside of its operating ratings. The maximum allowable
power dissipation is a function of the maximum junction temperature, TJ(max), the junction-to-ambient thermal
resistance, θJA, and the ambient temperature, TA. The maximum allowable power dissipation at any ambient tem-
perature is calculated using: PD(max)=(TJ(max) -TA)/θJA. Exceeding the maximum allowable power dissipation will
result in excessive die temperature, and the regulator will go into thermal shutdown.
6
Data Sheet
AZ1084-1.5,
IOUT=0mA, VIN=4.5V, 1.485 1.5 1.515 V
10mA≤IOUT≤5A, 3.0V≤VIN≤6V 1.47 1.5 1.53
AZ1084-1.8,
IOUT=0mA, VIN=4.8V, 1.782 1.8 1.818 V
10mA≤IOUT≤ 5A, 3.3V≤VIN≤6V 1.764 1.8 1.836
AZ1084-2.5,
Output Voltage VOUT IOUT=0mA, VIN=5.5V 2.475 2.5 2.525 V
10mA≤IOUT≤5A, 4.0V≤VIN ≤7V 2.45 2.5 2.55
AZ1084-3.3,
IOUT=0mA, VIN=6.3V, 3.267 3.3 3.333 V
10mA≤IOUT≤5A, 4.8V≤VIN≤8V 3.234 3.3 3.366
AZ1084-5.0,
IOUT=0mA, VIN=8V, 4.95 5 5.05 V
10mA≤ IOUT≤5A, 6.5V≤VIN≤10V 4.9 5 5.1
AZ1084-1.5, 0.5 6 mV
IOUT=10mA, 3.0V≤VIN≤10V 1 6
AZ1084-1.8, 0.5 6 mV
IOUT=10mA, 3.3V≤VIN≤10V 1 6
Line Regulation ΔVOUT
AZ1084-2.5, 0.5 6 mV
IOUT=10mA, 4.0V≤VIN≤10V 1 6
AZ1084-3.3, 0.5 6 mV
IOUT=10mA, 4.8V≤VIN≤10V 1 6
AZ1084-5.0, 0.5 10 mV
IOUT=10mA, 6.5V≤VIN≤10V 1 10
7
Data Sheet
AZ1084-1.5, 0mA≤IOUT≤5A, 3 15 mV
VIN-VOUT=3V 7 20
AZ1084-3.3, 0mA≤IOUT≤5A, 3 15 mV
VIN-VOUT=3V 7 20
AZ1084-5.0, 0mA≤IOUT≤5A, 5 20 mV
VIN-VOUT=3V 10 35
TO-263-3 4.15
TO-263-2 4.15
Current Limit ILIMIT VIN-VOUT=3V 5.5 6.5 A
Minimum ILOAD (MIN) VIN=10V (AZ1084-ADJ) 3 10 mA
Load Current
Quiescent Current IQ VIN=10V (AZ1084) 5 10 mA
Ripple Rejection PSRR fRIPPLE=120Hz, COUT=25μF Tantalum, 60 72 dB
IOUT=5A, VIN-VOUT=3V
8
Data Sheet
1.50 2.53
1.45
1.40
2.52
1.35
Dropout Voltage (V)
1.30
1.20
1.15 2.50
1.10
1.05
2.49
1.00
0.95
0.90 2.48
0.85
0.80 2.47
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 0 25 50 75 100 125
o
Output Current (A) Junction Temperature ( C)
Figure 4. Dropout Voltage vs. Output Current Figure 5. Output Voltage vs. Junction Temperature
1.260 0.60
0.59
1.258 IOUT=10mA
0.58
Minimum Load Current (mA)
Reference Voltage (V)
1.256
0.57
1.254 0.56
0.55
1.252
0.54
1.250
0.53
1.248 0.52
0.51
1.246
0.50
0 20 40 60 80 100 120 0 25 50 75 100 125
o 0
Junction Temperature ( C) Junction Temperature ( C)
Figure 6. Reference Voltage vs. Junction Temperature Figure 7. Minimum Load Current vs. Junction Temperature
9
Data Sheet
70 30
Package: TO-220-3
69 No Heatsink
25
68
20
67
15
66
10
65
64 5
0 20 40 60 80 100 120 0 20 40 60 80 100 120
o o
Junction Temperature ( C) Case Temperature ( C)
Figure 8. Adjust Pin Current vs. Junction Temperature Figure 9. Power Dissipation vs. Case Temperature
0.0 80
75
70
-0.2
65
Adjust Pin Current (μA)
Line Regulation (mV)
60
-0.4 55
50
45
-0.6
40
35
-0.8
30
25
-1.0 20
0 25 50 75 100 125 0 1 2 3 4 5
Figure 10. Line Regulation vs. Junction Temperature Figure 11. Adjust Pin Current vs. Output Current
10
Data Sheet
1.40 8
1.30 4
1.25 2
1.20 0
0 25 50 75 100 125 0 2 4 6 8 10 12
o
Junction Temperature ( C) Dropout Voltage (V)
Figure 12. Dropout Voltage vs. Junction Temperature Figure 13. Short Circuit Current vs. Dropout Voltage
200 40
ΔVOUT (20mV/Div)
ΔVOUT (100mV/Div)
100 20
0
0
-100 -20
5 6.5
2.5 5.5
IOUT (2.5A/Div)
VIN (1V/Div)
0 4.5
0.1A
-2.5 3.5
-5 2.5
Figure 14. Load Transient Response Figure 15. Line Transient Response
(Conditions: VIN=5.5V, VOUT=2.5V, IOUT=10mA to 5A (Conditions: VIN=4.5V to 6.5V, VOUT=2.5V,
CIN=10μF, COUT=10μF) IOUT=200mA, COUT=10μF)
11
Data Sheet
80
70
60
50
PSRR (dB)
40
30
20
10
0
10 100 1k 10k 100k 1M
Frequency (Hz)
12
Data Sheet
V IN AZ1084-ADJ VOUT
VIN VOUT
+ +
10μF ADJ 22μF
R1
150Ω
AZ1084-5.0 V OUT
V IN
V IN V OUT
+ GND +
10μF 22μF
13
Data Sheet
4.070(0.160) 3°
4.820(0.190)
9.650(0.380)
10.290(0.405) 1.150(0.045) 7.420(0.292)
8.840(0.348) 1.270(0.050)
1.390(0.055)
1.390(0.055)
70°
7°
5.600(0.220)
0.020(0.001)
8.640(0.340)
9.650(0.380)
0.250(0.010)
2.640(0.104)
14.760(0.581) 2.700(0.106)
0.360(0.014) 7.980(0.314)
15.740(0.620)
0.400(0.016)
2.390(0.094)
2.690(0.106)
7°
1.150(0.045) 3° 2.200(0.087)
1.390(0.055)
0.510(0.020) 2°
0.990(0.039) 8°
0.380(0.015)
2.540(0.100) 2.540(0.100) 2.540(0.100)
0° 2.540(0.100)
6°
14
Data Sheet
4.070(0.160) 3°
4.820(0.190)
9.650(0.380)
10.290(0.405) 1.150(0.045) 7.420(0.292)
8.840(0.348) 1.270(0.050)
1.390(0.055)
1.390(0.055)
70°
7°
5.600(0.220)
0.020(0.001)
8.640(0.340)
9.650(0.380)
0.250(0.010)
2.640(0.104)
14.760(0.581) 2.700(0.106)
15.740(0.620) 0.360(0.014) 7.980(0.314)
0.400(0.016)
2.390(0.094)
2.690(0.106)
7°
1.150(0.045) 3° 2.200(0.087)
1.390(0.055)
1.500(0.059)
0.510(0.020) 2°
0.990(0.039) 8°
0.380(0.015)
2.540(0.100) 2.540(0.100) 2.540(0.100)
2.540(0.100)
0°
6°
15
Data Sheet
9. 660(0. 380)
10. 660(0. 420) 2.580(0.102)
φ3. 560(0. 140) 3.380(0.133)
0. 550(0. 022)
4. 060(0. 160) 1. 350(0. 053)
1.850(0.073)
0. 200(0. 008)
14.230(0.560)
16.510(0.650)
7°
8.520(0.335)
9.520(0.375)
4. 820(0.190)
2.080(0. 082)
2.880(0. 113)
3° 7°
60 °
0. 813(0. 032)
8.763(0.345)
60 °
0. 381(0. 015)
0.356 (0.014)
2. 540(0. 100) 2. 540(0. 100) 0.610 (0.024)
16
Data Sheet
6.450(0.254)
1.350(0.053)
1.650(0.065)
6.650(0.262) 2.200(0.087)
2.400(0.094) 4.300(0.169)
5.200(0.205)
5.400(0.213) 5.400(0.213)
0.450(0.018)
0.580(0.023)
8°
4.800(0.189)
6.500(0.256)
0.600(0.024)
0.900(0.035)
5.450(0.215)
6.250(0.246)
9.500(0.374)
9.900(0.390)
0.000(0.000)
0.127(0.005)
3.800REF(0.150REF)
5° 5°
0.700(0.028)
0.900(0.035)
2.300TYP 0.500(0.020) 3°
0.700(0.028) 4°
2.550(0.100)
2.900(0.114)
1.400(0.055)
1.780(0.070)
4.500(0.177) 0.450(0.018)
4.700(0.185) 0.580(0.023)
17
Data Sheet
6.500(0. 256)
6.700(0. 264)
5.250REF
3
6.000(0.236)
6.200(0.244)
0.600(0.024)
1.000(0.039)
1.150(0.045)
1.500(0.059)
9.800(0.386)
0. 900(0. 035)
10.40(0.409)
1.80REF
1.100(0. 043)
3
7
3
2.9REF
7
1.400(0.055)
1.700(0.067)
1.100(0. 433) 0. 890(0. 035) 8
2.28BSC
1
5
2.200(0.087)
2.380(0.094)
18
Data Sheet
6.500(0. 256)
6.700(0. 264)
4.700REF
5.130(0.202) 1.29±0.1
5.460(0.215) 0.470(0.019)
0.600(0.024)
Option 1
5.250REF
5
6.000(0.236)
6.200(0.244)
0.150(0.006)
0.750(0.030)
0.600(0.024)
1.000(0.039)
9.800(0.386)
10.400(0.409)
1.800REF
0.900(0.035)
1.100(0.043)
0
8
2.900REF
3
7
0.720(0.028) 0.720(0.028) 0
1.400(0.055)
1.700(0.067)
0.900(0. 035) 0.850(0.033) 8
2.286(0. 090)
BSC
5
9
19
Data Sheet
2.180(0.086)
6.350(0.250)
2.380(0.094)
6.730(0.265) 4.320(0.170)
0.890(0.035) MIN
4.960(0.195) 0.460(0.018) 2.160(0.085)
1.270(0.050)
5.460(0.215) 0.600(0.024) MIN
0
1.20±0.05 15
5.210(0.205)
MIN
5.970(0.235)
6.220(0.245) 9.940(0.391)
10.340(0.407)
1.700(0.067)
1.900(0.075)
1.145(0.045)
1.492(0.059)
0.765(0.030) 1.010(0.040)
1.124(0.044) MAX DETAIL “A”
0.640(0.025)
2.290(0.090) 0.884(0.035)
BSC
0.650(0.026)
PLATING
0.780(0.031)
3 3
0.460(0.018) 0.410(0.016)
0.610(0.024) 0.560(0.022)
BASE METAL
0.640(0.025)
0.884(0.035)
SECTION B-B
GAUGE PLANE B
0 SEATING
10 PLANE
B
1.500(0.059) 0.020(0.001)
1.780(0.070) 0.120(0.005)
2.740(0.108)
REF
20
BCD Semiconductor Manufacturing Limited
http://www.bcdsemi.com
IMPORTANT NOTICE
IMPORTANT NOTICE
BCD Semiconductor
BCD Semiconductor Manufacturing
Manufacturing Limited
Limited reserves
reserves the
the right
right to
to make
make changes
changes without
without further
further notice
notice to
to any
any products
products oror specifi-
specifi-
cations herein.
cations herein. BCD
BCD Semiconductor
Semiconductor Manufacturing
Manufacturing Limited
Limited does
does not
not assume
assume any
any responsibility
responsibility for
for use
use of
of any
any its
its products
products for
for any
any
particular purpose,
particular purpose, nor
nor does
does BCD
BCD Semiconductor
Semiconductor Manufacturing
Manufacturing Limited
Limited assume
assume any
any liability
liability arising
arising out
out of
of the
the application
application or
or use
use
of any
of any its
its products
products or
or circuits.
circuits. BCD
BCD Semiconductor
Semiconductor Manufacturing
Manufacturing Limited
Limited does
does not
not convey
convey anyany license
license under
under its
its patent
patent rights
rights or
or
other rights
other rights nor
nor the
the rights
rights of
of others.
others.
MAIN SITE
MAIN SITE
- Headquarters
BCD Semiconductor Manufacturing Limited - Wafer
BCD FabSemiconductor Manufacturing Limited
BCD Semiconductor
- Wafer Fab Manufacturing Limited Shanghai SIM-BCD
- IC Design GroupSemiconductor Manufacturing Co., Ltd.
No. 1600, Zi
Shanghai Xing Road,
SIM-BCD Shanghai ZiZhu
Semiconductor Science-basedLimited
Manufacturing Industrial Park, 200241, China 800 Yi Shan Road,
Advanced Shanghai
Analog 200233,
Circuits China Corporation
(Shanghai)
Tel:
800,+86-21-24162266, Fax: +86-21-24162277
Yi Shan Road, Shanghai 200233, China Tel: +86-21-6485 1491,YiFax:
8F, Zone B, 900, Shan+86-21-5450 0008200233, China
Road, Shanghai
Tel: +86-21-6485 1491, Fax: +86-21-5450 0008 Tel: +86-21-6495 9539, Fax: +86-21-6485 9673
REGIONAL SALES OFFICE
Shenzhen OfficeSALES OFFICE
REGIONAL Taiwan Office USA Office
Shanghai
Shenzhen SIM-BCD
Office Semiconductor Manufacturing Co., Ltd., Shenzhen Office BCD Taiwan
Semiconductor
Office (Taiwan) Company Limited BCD Office
USA Semiconductor Corp.
Unit A Room
Shanghai 1203, Skyworth
SIM-BCD Bldg., Gaoxin
Semiconductor Ave.1.S., Nanshan
Manufacturing Co., Ltd.District,
Shenzhen Shenzhen,
Office 4F, 298-1,
BCDRui Guang Road,(Taiwan)
Semiconductor Nei-Hu District,
Company Taipei,
Limited 30920Semiconductor
BCD Huntwood Ave.Corporation
Hayward,
China
Advanced Analog Circuits (Shanghai) Corporation Shenzhen Office Taiwan4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei, CA 94544,
30920 USA Ave. Hayward,
Huntwood
Tel:
Room +86-755-8826
E, 5F, Noble 7951 Tel: +886-2-2656
Center, No.1006, 3rd Fuzhong Road, Futian District, Shenzhen 518026, China Taiwan 2808 Tel :94544,
CA +1-510-324-2988
U.S.A
Fax: +86-755-88267951
Tel: +86-755-8826 7865 Fax: +886-2-2656 28062808
Tel: +886-2-2656 Fax:: +1-510-324-2988
Tel +1-510-324-2788
Fax: +86-755-8826 7865 Fax: +886-2-2656 2806 Fax: +1-510-324-2788