Download as pdf or txt
Download as pdf or txt
You are on page 1of 34

CLIENT :

SONATRACH
ETUDE, FOURNITURE ET CONSTRUCTION D’UNE JETEE GNL
CONTRACTOR : ET DES INFRACTRUCTURES MARITIMES ET PORTUAIRES AU`
NIVEAU DU PORT HYDROCARBURES DE SKIKDA - ALGERIE

VENDOR:

VENDOR DOCUMENT

PROJECT NO. : 18S266

CLIENT : SONATRACH

CONTRACTOR : CHINA HARBOUR ENGINEERING COMPANY LTD.

CONTRACTOR PO NO. : CHEC-18S266-PO-006

ITEM DESCRIPTION : MV SWITCHGEAR

SUPPLIER / VENDOR : SCHNEIDER ELECTRIC (CHINA) CO., LTD.

CONTRACTOR DOC. NO. : 18S266-PR-VP-2000-PO006-10007

VENDOR DOC. NO. : S2100115-06

DOC. DESCRIPTION: : COUPLER-1

REVISION NO. : 0 Total Pages : 34

EQUIPMENT TAG NO. : S2100115-06

C1 Approved For Manufacture C3 Not Approved

C2 Approved With Comments C4 For Information Only


(Manufacturer may proceed)

1. The approval of this document by CHEC does not relieve the supplier of any responsibility for compliance
with the terms and conditions of the contract.

2. Any comments and mark-ups provided herein by CHEC do not constitute an approval to proceed if cost or
schedule is impacted on the Contract / Purchase Oder.

REVIEWED APPROVED
SIGN
DATE
CHINA HARBOUR ENGINEERING COMPANY LTD.

Rev. Date Description Prep’d Chk’d App’d

0 15.01.2021 FIRST ISSUE AZO ISZ ALU


0 1 2 3 4 5 6 7 8 9

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
SCHNEIDER ELECTRIC , TURKEY

SCHNEIDER ELECTRIC , TURKEY Manisa OSB IV.Kısım, Keçiliköy Mah.


Zeki Şairoğlu Cad. No.13
A

45030 Yunusemre - Manisa


Turkey
B

CUSTOMER NAME : In the fourth harbor engineering investigation and Design Institute Co. Ltd.

JOB NUMBER : S21001.15

PROJECT NAME : SONATRACH SKIKDA EXTENSION PROJECT

DRAWING NUMBER : S2100115-06


C

DRAWING NAME : COUPLER-1

SWITCHBOARD TYPE : MCSet


D

0 15.01.2021 FIRST ISSUE AZO ISZ ALU


Name Visa Name Visa Name Visa
Rev. Date Modification
E

DRAWN BY CHECKED BY APPROVED BY


F

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. TITLE PAGE / COVER PAGE S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
2 / 34
0 1 2 3 4 5 6 7 8 9

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
SHEET DESIGNATION CHANGE INDEX SHEET DESIGNATION CHANGE INDEX

1 CUSTOMER COVER PAGE 0 27 PARTS LIST 0

2 TITLE PAGE / COVER PAGE 0 28 TERMINAL DIAGRAM 0


A

3 TABLE OF CONTENTS 0 29 TERMINAL DIAGRAM 0

4 SYMBOLS 0 30 TERMINAL DIAGRAM 0

5 POWER CIRCUIT C.B. AND CONTACTS 0 31 TERMINAL DIAGRAM 0

6 POWER CIRCUIT CT'S 0 32 TERMINAL DIAGRAM 0


B

7 POWER CIRCUIT CT'S 0 33 TERMINAL DIAGRAM 0

8 VOLTAGE CIRCUIT 0 34 TERMINAL DIAGRAM 0

9 POWER CIRCUIT E/S 0

10 CONTROL CIRCUIT AUXILIARY SUPPLY 0

11 HEATING CIRCUIT AUXILIARY SUPPLY 0


C

12 C.B.CLOSING CIRCUIT 0

13 TRIPPING CIRCUIT 0

14 PROTECTION RELAY INPUT CARD 0

15 PROTECTION RELAY INPUT CARD 0


D

16 PROTECTION RELAY INPUT CARD 0

17 PROTECTION RELAY OUTPUTS 0

18 PROTECTION RELAY OUTPUTS 0

19 SIGNALISATION CIRCUIT 0

20 AUXILIARY CONTACTS 0
E

21 ATS INTERFACE 0

22 PROTECTION RELAY 0

23 LV BOX DOOR 0

24 PARTS LIST 0

25 PARTS LIST 0
F

26 PARTS LIST 0

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. TABLE OF CONTENTS S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
3 / 34
0 1 2 3 4 5 6 7 8 9

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
A

IEC SYMBOL DESCRIPTION IEC SYMBOL DESCRIPTION IEC SYMBOL DESCRIPTION IEC SYMBOL DESCRIPTION
INSTANTANEOUS COIL BISTABLE RELAY HV EARTHING SWITCH FUSE
& CONTACTOR RELAY
(K) (K) (Q) (F)

HEATING RESISTOR MAKE CONTACT HV CIRCUIT BREAKER RESIDUAL CURRENT


(R) (Q) (T)
B

MEASURING DEVICE BREAK CONTACT LIMIT SWITCH MAKE CONTACT CURRENT TRANSFORMER

(P) (S) (T)

PROTECTION RELAY INPUT CHANGE OVER LIMIT SWITCH BREAK CONTACT TEST BOX
BREAK CONTACT
(S) (X)
MISCELLANEOUS COMPONENTS

MISCELLANEOUS COMPONENTS

MISCELLANEOUS COMPONENTS

MISCELLANEOUS COMPONENTS
DIODE PUSH BUTTON N/O HV CONTACTOR TERMINAL
(V) (S) (Q) (X)
C

VOLTAGE LED LAMP PUSH BUTTON N/C LV CIRCUIT BREAKER PROTECTIVE EARTH
(S) (Q)
(H)

THERMOSTAT / HYGROSTAT 2 POSITION TURN SWITCH N/O THERMAL/MAGNETIC EARTH-GROUND


1 2 CIRCUIT BREAKER
(S) (S) (Q)
D

INDICATOR TUNGSTEN, 3 POSITION TURN SWITCH N/O FUNCTIONAL EQUIPMENT


CABLE
NEON, LED 102
(H) (S)

ON DELAY TIMER (TON) TNC SWITCH SURGE ARRESTER


1 0 2

(K) (S) (F) VOLTAGE TRANSFORMER

(T)
OFF DELAY TIMER (TOF) HV DISCONNECTING MECHANICAL INTERLOCK
(K)
E

TRANSDUCER MULTIPIN CONNECTOR ELECTRICAL INTERLOCK TEST TERMINAL


(T) (X) E (X)

DC/AC CONVERTER DC/DC CONVERTER HORN


(U) (U) (H)
F

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. SYMBOLS S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
4 / 34
0 1 2 3 4 5 6 7 8 9

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
L1 Circuit breaker truck position
Drawn in
L2 Drawn out
-X101 51 -X101 50 -X101 49 -X101 57 -X101 56 -X101 42
/5.3:B

L3 RI contacts 1

C.B. rack out


R14

C.B. rack out

C.B. rack out


A

C.B. rack in

C.B. rack in
C.B. rack in
(ex: RI11:RI12) 0
RO contacts 1
/5.4:B

(ex: RO11:RO12) 0
R13

-X01 A4 -X01 A3 -X01 A2 -X01 C4 -X01 C3 -X01 C1


/5.4:B
R12

A4 A3 A2 C4 C3 C1
/14.2:C
R11

/5.5:B

R14 R13 R12 R04 R03 R01


R04
B

/5.6:B

B4 B3 B2 D4 D3 D1
R03

-X01 B4 -X01 B3 -X01 B2 -X01 D4 -X01 D3 -X01 D1


/12.2:C
R02

/5.7:B

-X101 54 -X101 53 -X101 52 -X101 60 -X101 59 -X101 46


R01

44

/5.3:E
41
42
C

34

/13.4:E
31
32
24

-X101
/19.3:C

18 17 11 12 -X101 28 27 25 23 -X101 35 33 -X101 9


21
22

C.B. CLOSED

C.B. CLOSED

C.B. CLOSED
C.B. CLOSED
C.B. CLOSED
14

C.B. OPEN

C.B. OPEN

C.B. OPEN
C.B. OPEN
C.B. OPEN
/5.4:E
11
12
252

-X20 = C13 B13 B16 C16 C9 C10 B11 B12 C6 C8 A13


D

/5.8:E
251

EasyPact VACUUM -XM =


254

C13 B13 B16 C16 C9 C10 B11 B12 C6 C8 A13


CIRCUIT BREAKER
234

/5.7:E
231

OF4 OF1 OF14 OF13 OF12 OF11 OF23 OF21 PF


-Q1 42 44 14 12 142 144 132 134 122 124 112 114 232 234 212 214 254 252
232

/5.1:D PF contact shown


-Q1 -Q1 -Q1 -Q1 -Q1 -Q1 -Q1 -Q1 -Q1 in position spring
221

41 11 141 131 121 111 231 211 251


/5.1:D /5.1:D /5.1:D /5.1:D /5.1:D /5.1:D /5.1:D /5.1:D not loaded.
222
214

D13 D16 D9 D10 D11 D12 D6 D8 A14


/5.8:E
211
212

D13 D16 D9 D10 D11 D12 D6 D8 A14


E

144

/5.5:E
141

-X101
142

22 19 -X101 32 31 30 29 -X101 39 37 -X101 10


134

/5.5:E
131
132
124

The «ready to close» contact (PF) indicates that


/5.6:E

the circuit breaker is ready to close in the following conditions:


121

• The circuit breaker contacts are open


-X101 -X101
122

24 26 34 38 -X101 40
• The operating mechanism closing spring is charged
• The opening pushbutton is not activated (by a keylock or manually)
114
F

• The opening shunt release is not energized


-X101 61 -X101 62 -X101 63 -X101 64
/5.6:E
111

• The undervoltage release, if present, is energized


INT
112

9.2:A
L1 L2 L3 -X101 43 -X101 44 -X101 47 -X101 48
6.1:A 6.1:A 6.2:A

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. POWER CIRCUIT C.B. AND CONTACTS S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
5 / 34
0 1 2 3 4 5 6 7 8 9

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
5.2:F 5.2:F 5.3:F
L1 L2 L3
A

Temporary
Connection
-XB011

1 2
1
(I0)
-XB11

-XB01A
P2 1
1S2 A 1 3 4
(I1)

CURRENT MEASURING
-XB11 2
B

-T1 2
A 2

INFORMATION
SPARE/FUTURE
/7.1:B
1S1
P1

3
A 3

5 6
3
(I2)
-XB11
P2 4
1S2 A 4

-T2 5
A 5
/7.1:C
1S1
P1
7 8
(I3)
C

6 4
A 6 -XB11

P2 7
1S2 A 7

-T3 8
A 8
/7.2:C
1S1
P1

9
A 9
D

10

10
A

PE
E

L1 L2 L3
F

7.1:A 7.1:A 7.2:A

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. POWER CIRCUIT CT'S S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
6 / 34
0 1 2 3 4 5 6 7 8 9

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
6.1:F 6.1:F 6.2:F
L1 L2 L3
A

-XB012 Current Protection Information


( Sepam )
1 2 I0
-F1
/22.1:A
-XB01B
P2 1
2S2 A 1 3 4 I1 B14 I1 B11
B

-T1 2
A 2
/6.1:B
2S1
P1

3
A 3

5 6 I2 B15 I2 B12

P2 4
2S2 A 4

-T2 5
A 5
/6.1:C
2S1
P1
7 8 I3
C

6 B16 I3 B13
A 6

P2 7
2S2 A 7

-T3 8
A 8
/6.2:C
2S1
P1

9
A 9
D

10

10
A

PE
E

L1 L2 L3
F

9.3:A 9.3:A 9.3:A

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. POWER CIRCUIT CT'S S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
7 / 34
0 1 2 3 4 5 6 7 8 9

-F1

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
/22.1:A
-Q10 Sepam series 80
E1 V1
-XB21 2A VOLTAGE INPUT CARD
1 1 2

See Detail: S2100115_TM1


Voltage reference N E2 V0
VOLTAGE INFORMATION
1st secondary V0 2

-Q10
A

-XB21 /8.2:A
E4 V2
FROM BUS-A

3 3 4
Voltage reference N
1st secondary V1 4
E5
-Q10
-XB21 /8.2:A
5 5 6
Voltage reference N E7 V3
1st secondary V2 6

-Q10 E8
-XB21 /8.2:A
7 7 8
Voltage reference N
1st secondary V3 8
14 11 E10
B

12
E11
/20.6:C
See Detail: S2100115_TM1
VOLTAGE INFORMATION

F25
FROM INCOMER-1

-XB22 -XB22

See Detail: S210015_TM1


/22.6:C

VOLTAGE INFORMATION
B1 V1 B3
1 5
Voltage reference N Voltage reference N

FROM INCOMER-2
1st secondary V1 2 6 1st secondary V1
C

-XB22 -XB22
B2 V2 B4
3 7
Voltage reference N Voltage reference N
1st secondary V2 4 8 1st secondary V2

-Q12
-XB23
D

2A
1 1 2
Voltage reference N
1st secondary V0 2
See Detail: S2100115_TM1
VOLTAGE INFORMATION

F1
-Q12 /22.1:A
-XB23 PROTECTION RELAY
/8.2:D
FROM BUS-B

3 3 4
Voltage reference N B21 V1 B22
1st secondary V1 4

-Q12
-XB23 /8.2:D
5 5 6
Voltage reference N B23 V2 B24
1st secondary V2 6
E

-Q12
-XB23 /8.2:D
7 7 8
Voltage reference N B25 V3 B26
1st secondary V3 8

14 11
12
/20.6:C
B27

V0

B28
F

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. VOLTAGE CIRCUIT S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
8 / 34
0 1 2 3 4 5 6 7 8 9

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
5.0:F 7.1:F 7.1:F 7.2:F

INT L1 L2 L3

-XB5 1 -XB5 3 -XB5 5 -XB5 7 -XB5 10 -XB5 12 -XB5 14


A

-X36 = X36 1 X36 3 X36 5 X36 7 X36 9 X36 11 X36 13

X35 1 X35 3 X35 5 X35 7 X35 9 X35 11 X35 13


-X35 =

E.S. open

E.S. open

E.S. open

E.S. open

E.S. closed
E.S. closed

E.S. closed
EO4 EO3 EO2 EO1
14 12 14 12 14 12 14 12
EC3 EC2 EC1
11 11 11 11 12 14 12 14 12 14
B

11 11 11

X35 2 X35 4 X35 6 X35 8 X35 10 X35 12 X35 14

HE09 X36 2 X36 4 X36 6 X36 8 X36 10 X36 12 X36 14

-XB5 2 -XB5 4 -XB5 6 -XB5 8 -XB5 9 -XB5 11 -XB5 13


C

-Q2
-H1
D

(EO) Means contacts actuated et the End of the Opening


(EC) Means contacts actuated et the End of the Closing

Earthing switch position


Closed
Open

EC contacts 1
(ex: EC21:EC24) 0

EO contacts 1
L1 L2 L3
(ex: EO21:EO24) 0
E

12
11 /9.6:B
14
12
11 /9.5:B
14
12
11 /9.5:B
14
12
11 /9.4:B
14
14
11 /9.7:B
12
14
11 /9.7:B
12
14
F

11 /9.6:B
12
14
11 /14.2:C
12

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. POWER CIRCUIT E/S S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
9 / 34
0 1 2 3 4 5 6 7 8 9

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
LV Auxiliary supply LV Control and signalisation LV polarity distribution
MCB protection

CL+ / 12.1:A Closing circuit ( + )

MES1+ / 14.0:A I/O Card ( +)


A

SE+ / 22.1:C Sepam supply ( + )

COM1 / 22.6:B Communication Supply ( + )

SIG1+ / 19.0:A Signalisation ( + )

SIG2+ / 19.0:A Signalisation ( + )

MES2+ / 15.0:A I/O Card ( +)

MES3+ / 16.0:A I/O Card ( +)


B

-Q3 SE3 / 22.6:C MCS025( +)


-CNA 2
+ CONTROL VOLTAGE SUPPLY 3
6A
4
-XS1 1 2 3 4 5 6 7 8 9 10

-CNA 1
125VDC 1 2
-CNB 1
- CONTROL VOLTAGE SUPPLY
14 11 /20.3:C
-XS2 1 2 3 4 5 6 7 8 9 10

-CNB 2
12
SE4 / 22.6:C MCS025( -)

MES3- / 16.0:F I/O Card ( - )


C

MES2- / 15.0:F I/O Card ( - )

COM2 / 22.6:C Communication Supply ( - )


SE- / 22.1:D Sepam supply ( - )

MES1- / 14.0:F I/O Card ( - )

SIG- / 19.0:F Signalization ( - )

CL- / 12.2:F Closing circuit ( - )


D

-Q4
6A
3 4
TR+ / 13.4:A Trip Circuit ( + )
1 2
TR- / 13.4:F Trip Circuit ( - )

14 11 /20.4:C
12
E

-Q6
-CNC 2
+ MOTOR BREAKER SUPPLY 3
6A
4
M+ / 12.0:C
CB Motor supply ( + )
-CNC 1
125VDC 1 2
M- / 12.0:F
CB Motor supply ( - )
-CND 1
F

- MOTOR BREAKER SUPPLY


14 11 /20.5:C
-CND 2
12

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. CONTROL CIRCUIT AUXILIARY SUPPLY S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
10 / 34
0 1 2 3 4 5 6 7 8 9

LV polarity supply LV polarity protection LV box light 230V Heating resistor Heating resistor

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
Cable Compartment CB Compartment
A

-Q8
-CNE 2 -XH -XH -XH -XH -XH
6A
HEATING 220VAC SUPPLY 3 4 1 2 3 4 5

-CNE 1
1
1 2
220 VAC -CNF 1 -XH -XH -XH -XH -XH -XH -XH -HD1 C1 C2
-ST1
THERMOSTAT
2
Θ

HEATING 220VAC SUPPLY 6 7 8 9 10 11 12 Hygrostat L


14 11 /20.5:C LOAD 1 LOAD 2
-CNF 2
12
H%
N
B

N01 N02
1

-SW1
2

-XH 13 -XH 14 -XH 15 -XH 16

-HL1 L
-X82 = -X82 1
/11.6:C
C

-X81 = -X81 1
/11.6:C

CABLE
COMPARTMENT 1
N
-R1
2

-X81 2
/11.6:C

-X82 2
D

/11.6:C
E
F

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. HEATING CIRCUIT AUXILIARY SUPPLY S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
11 / 34
0 1 2 3 4 5 6 7 8 9

Local PROTECTION RELAY External Close ATS


Charging Motor

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
Close CLOSE (Spare) CLOSE
10.7:A / CL+
-XBC1 -XBC1 -XBC1 -XBC1
1 2 3 4

A11
A

F1 H147
13 /22.1:A A10 External F1
O3
-S1 SEPAM closing /22.1:A H146
CLOSING 14 CLOSING O106
-XBC1 -XBC1
5 6

Local-Remote
21 33 51 21 13
-S3 -S3 1 2

/12.3:B
22 34 52 S3 22 14
LOCAL
/12.2:B

/14.3:C

/20.8:C
B

33
-X101 55
S6
/15.7:C 34
Manual

-X01 C2
A18
-F1 -XBC1 7
C2

SPARE
/22.1:A
H332 A17
O5
C.B. rack out

F1 WATCHDOG
/22.1:A 8
O301
H331 -XBC1
R02
D2 ATS Close
M+
C

10.7:F / Permissive A8
-F1
-X01 D2 /22.1:A
O2 A7
CLOSING INHIBIT
14 11
12 A1 -X101 58
24 21 /20.1:C
22 -KEC1
34 31 125VDC A2
32 Spring Loaded
44 41
42 -X101 36 -X101 1 -X101 3

A11
-X20 C5 -X20 A15
D

A11
-XM C5 -XM A15

B2

M
-MCH
Q1

M1
E

B1

A2
-XF
A1

-XM A16
A12 Schematic number: PHA22340 rev:06
-X20 A16
A12
F

-X101 2
-X101 6

10.7:F / M- 10.7:D / CL-

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. C.B.CLOSING CIRCUIT S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
12 / 34
0 1 2 3 4 5 6 7 8 9

1st Shunt trip coil Tripping orders To TCS relay inputs

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
10.7:D / TR+
A

-XBT1 1 2 -XBT1 5 6 I101-H101 I102-H104


14.0:D 14.1:D

See: S2100115-TM1*
Inputs for breaker position

Open Order
BusCoupler
13 A5 and

ATS
-F1 Trip Circuit Supervision (TCS)
/22.1:A
-S2 14
O1
A4
OPEN
SEPAM
B

P.B.
TRIP 14.0:F 14.1:F
I101-H102 I102-H105

-XBT1 3 4 -XBT1 7 8
C

-X101 5 -X101 4-X101 21 15 -X101 16

-X20 A7 -X20 A9 D14 B14 C14


/5.3:D /5.3:D

-XM A7 -XM A9 D14 B14 C14


D

Q1 -Q1
31

/5.1:D 32 34
OF3
E

C12 C2
-MX2 -MX1
C11 C1

-XM A8 -XM A10 Schematic number: PHA22340 rev:06

-X20 A8 -X20 A10


/5.3:D /5.3:D

-X101 8 -X101 7
F

10.7:E / TR-

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. TRIPPING CIRCUIT S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
13 / 34
0 1 2 3 4 5 6 7 8 9

Trip Circuit Supervision (TCS) Syncron

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
C.B. E.S. L/R Remote Free Free Free Free Free Free Free
CB ON CB OFF Service Closed Position SEPAM input SEPAM input OK SEPAM input SEPAM input SEPAM input SEPAM input SEPAM input
A

10.7:A / MES1+

-XBH1 1 3 5 7 9 11 13 15 17 19 21 23 25

-X101 41

C.B. rack in
15
-X36
B

-X35 15
-X01 A1 /9.4:A

-Q2
E.S. closed
A1

EC4
12 14 33
-S3
/9.2:F 11 /12.3:B 34 A5
R11 L/R F25
REMOTE
/22.6:C A4
O1
C

B1
16
-X35
-X01 B1
/9.4:A
-X36 16

-X101 45

-XBH1 2 4 6 8 10 12 14 16 18 20 22 24 26

Inputs for breaker position


and
Trip Circuit Supervision (TCS)
D

13.7:A 13.8:A
I101-H101 I102-H104

-F1 -F1 -F1


H101 H104 H107 H111 H116 H117 H118 H119 H120 H123 H124 H125 H126 H127

I101 I102 I103 I104 I105 I106 I107 I108 I109 I110 I111 I112 I113 I114
E

H102 H105 H108 H110 H113 H114 H115 H121 H122

-XBH1
(Sepam Time Sync.

28 30 32
Future/Spare)

I101-H102 I102-H105
13.7:B 13.8:B

-XBH1
27 29 31
F

10.7:D / MES1-

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. PROTECTION RELAY INPUT CARD S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
14 / 34
0 1 2 3 4 5 6 7 8 9

Free Trip Selector Switch


Free Free Coupler 2

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
Coupler-1 Coupler-1 Free SEPAM input Free
TCS CB ON TCS CB OFF SEPAM input SEPAM input SEPAM input CB Rack In&Closed Transfer Start Auto Manual QA QAB QB
SEPAM input
A

10.7:B / MES2+

-XBH2 1 -XBH2 3 -XBH2 5 -XBH2 7 -XBH2 9 -XBH2 11 -XBH2 13 -XBH2 15 -XBH2 17 -XBH2 19 -XBH2 21 -XBH2 23 -XBH2 25 -XBH2 27
B

See: S2100115-TM1*

See: S2100115-TM1*
13 21 13
See: S2100115-TM1*

1 2

S6 -S6

CB Rack In&Closed
23 13
/15.7:C /15.6:C
From Coupler-2

From Coupler-2
1 2
-TS1 14 22 14 31
From Coupler-2

Auto /21.4:C
TSS -TSS
CB OFF

/21.7:C TSS
CB ON

/15.9:C /15.8:C 14
/12.3:B 24 /15.9:C 32 /15.7:C
Manual QA QAB QB
C

-XBH2 2 -XBH2 4 -XBH2 6 -XBH2 8 -XBH2 10 -XBH2 12 -XBH2 14 -XBH2 16 -XBH2 18 -XBH2 20 -XBH2 22 -XBH2 24 -XBH2 26 -XBH2 28
D

-F1 -F1 -F1


H202 H205 H208 H211 H216 H217 H218 H219 H220 H223 H224 H225 H226 H227

I201 I202 I203 I204 I205 I206 I207 I208 I209 I210 I211 I212 I213 I214
E

H201 H204 H207 H210 H213 H214 H215 H221 H222


F

10.7:C / MES2-

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. PROTECTION RELAY INPUT CARD S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
15 / 34
0 1 2 3 4 5 6 7 8 9

CB CB CB CB ANSI59 Upstream L/R Switch

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
ANSI27 & ANSI59 Pro. Relay Upstream L/R Switch ANSI27 & Pro. Relay
Closed Service Closed Service Voltage OK Intertrip In Local
VT Circuit Voltage OK No Fault Intertrip In Local VT Circuit No Fault
Healthy (50/51/50N/51N) Healthy (50/51/50N/51N)

INCOMER-1 INCOMER-2
A

10.7:B / MES3+

-XBH3 1 -XBH3 3 -XBH3 5 -XBH3 7 -XBH3 9 -XBH3 11 -XBH3 13 -XBH3 15 -XBH3 17 -XBH3 19 -XBH3 21 -XBH3 23 -XBH3 25 -XBH3 27
B

See: S2100115-TM1*
See: S2100115-TM1*

See: S2100115-TM1*

See: S2100115-TM1*

See: S2100115-TM1*

See: S2100115-TM1*

See: S2100115-TM1*

See: S2100115-TM1*

See: S2100115-TM1*

See: S2100115-TM1*

See: S2100115-TM1*

See: S2100115-TM1*

See: S2100115-TM1*

See: S2100115-TM1*
Pro. Relay No Fault

Pro. Relay No Fault


VT Circuit Healthy

VT Circuit Healthy
(50/51/50N/51N)

(50/51/50N/51N)
Voltage OK

Voltage OK
L/R Switch

L/R Switch
CB Service

CB Service
CB Closed

CB Closed
ANSI27 &

ANSI27 &
Upstream

Upstream
Intertrip

Intertrip
In Local

In Local
ANSI59

ANSI59
C

-XBH3 2 -XBH3 4 -XBH3 6 -XBH3 8 -XBH3 10 -XBH3 12 -XBH3 14 -XBH3 16 -XBH3 18 -XBH3 20 -XBH3 22 -XBH3 24 -XBH3 26 -XBH3 28
D

-F1 -F1 -F1


H302 H305 H308 H311 H316 H317 H318 H319 H320 H323 H324 H325 H326 H327

I301 I302 I303 I304 I305 I306 I307 I308 I309 I310 I311 I312 I313 I314
E

H301 H304 H307 H310 H313 H314 H315 H321 H322


F

10.7:C / MES3-

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. PROTECTION RELAY INPUT CARD S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
16 / 34
0 1 2 3 4 5 6 7 8 9

SEPAM BASE CARD OUTPUT SEPAM BASE CARD OUTPUT Spare Sepam

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
Outputs
A
B
C

-XSO 1 -XSO 2 -XSO 3 -XSO 4


33 35-XBH1 37 39-XBH1 41 43-XBH1 45 47-XBH1 49 51
-XBH1 -XBH1 -XBH1 -XBH1 -XBH1 -XBH1

H144
A20 H135 H138 H141 H338
A14 -F1
F1 -F1 -F1 -F1 /22.1:A -F1
F1 /22.1:A /22.1:A /22.1:A
H143
/22.1:A
/22.1:A A19 H134 H137 H140 O105 H337
/22.1:A A13 O102 O103 O104 O303
O4 O5
D
E
F

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. PROTECTION RELAY OUTPUTS S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
17 / 34
0 1 2 3 4 5 6 7 8 9

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
Spare Sepam
Synchron ok Synchron ok
Outputs
A
B
C

53 55-XBH1 57 59 61 63
-XBSN 1 -XBSN 2 -XBSN 3 -XBSN 4 -XBSN 5 -XBSN 6
-XBH1 -XBH1 -XBH1 -XBH1 -XBH1

H341
H344 H347
-F1
/22.1:A -F1 -F1
H340 A7 A10
O304 /22.1:A H343 /22.1:A H346
O305 O306 -F25 -F25
/22.6:C A8 /22.6:C A11
O2 O3
D
E
F

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. PROTECTION RELAY OUTPUTS S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
18 / 34
0 1 2 3 4 5 6 7 8 9

Circuit breaker signaling lamps Sepam signalling

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
OFF Sign. lamp ON Sign. lamp Trip Sign. lamp ATS Ready lamp

10.7:B / SIG1+
A

10.7:B / SIG2+

-X101 20

-X20 D15
/5.3:D
B

XM D15

Jumper

21 13 23 33 43
-Q1
/5.1:D 22 24 14 24 34 44
12 14
H335
H132 -S4
OF2
-KTRP1 -F1 /19.8:C
/19.1:F F1 /19.8:C
11 /22.1:A H131 /19.8:C
/22.1:A H334 O101
C

O302
SEPAM
TRIP

XM C15 XM B15

-X20 C15 -X20 B15


/5.3:D /5.3:D

-X101 14 -X101 13
D
E

A1 X1 X1 X1 X1
-KTRP1 -H2 -H3 -H4 -H5
125VDC A2 Green X2 Red X2 Amber X2 White X2

10.7:D / SIG-
14 11 /19.4:C
12
24 21
F

22
34 31 /20.0:C
32
44 41
42

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. SIGNALISATION CIRCUIT S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
19 / 34
0 1 2 3 4 5 6 7 8 9

SEPAM FAULT C.B. Spring

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
SPARE Charged MCB TRIP CONTACTS/SPARE L/R SWITCH SPARE TERMINALS
LOCAL POSITION
A

-XBSP 1 2 3 4 5 6 7 8 9 10 PE

1 2 4 5 7 8 10 11 13 14 16 17 19 20 22 23 25
B

51
12 14 12 14 12 14 12 14 12 14 12 14
-S3
32 34 22 24 /12.3:B
-Q3 -Q4 -Q6 -Q8 Q10 Q12 LOCAL 52
-KTRP1 -KEC1 /10.3:C /10.3:E /10.3:F
11 11 11 /11.2:B 11 /8.2:A 11 /8.2:D 11
/19.1:F 31 /12.1:D 21
C

-XB7 3 -XB7 6 -XB7 9 -XB7 12 -XB7 15 -XB7 18 -XB7 21 -XB7 24 -XB7 26


D
E
F

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. AUXILIARY CONTACTS S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
20 / 34
0 1 2 3 4 5 6 7 8 9

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
ATS Signals To Incomers
A

Please See : S2100115-TM1*


Incomer - 1 Incomer - 2

ATS Close ATS Close ATS Open A/M Switch ATS Close ATS Close ATS Open A/M Switch
Command Permissive Command in Manual Command Permissive Command in Manual
B

-XATS 1 -XATS 3 -XATS 5 -XATS 7 -XATS 9 -XATS 11 -XATS 13 -XATS 15


C

H232 H244 H247


H235 H238 43 H241 73
F1 F1 F1
F1 F1 S6 F1 /22.1:A /22.1:A S6
/22.1:A H231 H243 H246
/22.1:A H234 /22.1:A H237 /15.7:C 44 /22.1:A H240 O205 O206 /15.7:C 74
O201 O202 O203 Manual O204 Manual
D

-XATS 2 -XATS 4 -XATS 6 -XATS 8 -XATS 10 -XATS 12 -XATS 14 -XATS 16


E
F

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. ATS INTERFACE S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
21 / 34
0 1 2 3 4 5 6 7 8 9

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
-F1

B83 SEPAM OUTPUTS CROSS REF

/13.6:B
O1 A5-A4
A

PROTECTIONS
/12.4:C
O2 A8-A7 C1
50/51
50N/51N /12.3:A
O3 A11-A10

BASICS
50G/51G
50BF
O4 A14-A13 /17.1:D
46
27/27D/27R
A18-A17 /12.4:C
59/59N
O5
47
81H/81L A20-A19 /17.2:D
C2

E-LAN/S-LAN
-AP1
B

P1Tx P2Tx

Fiber optic Interface


O101 H132-H131 /19.7:C
F C P1Rx P2Rx

ACE850FO
TCP/IP
-PE
O102 H135-H134 /17.4:D
+/~
1
10.7:A / COM1 4

MES120-1
O103 H138-H137 /17.5:D
-/~
10.7:C / COM2 3
O104 H141-H140 /17.6:D

-F25
O105 H144-H143 /17.7:D

D2 D
MCS025
O106 H147-H146 /12.4:A
PROTECTIONS
C

+/~ 25
O201 H232-H231 /21.1:C 10.7:B / SE3 A1

-/~ OUTPUT CROSS REF


+/~ O202 H235-H234 /21.2:C 10.7:C / SE4 A2
10.7:A / SE+ A1 O1 A5-A4 /14.5:C
MES120-2

-/~ O203 H238-H237 /21.3:C


10.7:C / SE- A2 O2 A8-A7 /18.8:D
O204 H241-H240 /21.5:C
O3 A11-A10 /18.8:D
O205 H244-H243 /21.6:C
O4 A13-A15-A14
O206 H247-H246 /21.6:C
D

A17
O301 H332-H331 /12.3:C

O302 H335-H334 /19.5:C

-PE
MES120-3

MEASUREMENTS O303 H338-H337 /17.8:D

O304 H341-H340 /18.2:D D1


A V Hz
O305 H344-H343 /18.3:D
cosᶲ W var
O306 H347-H346
E

/18.4:D

VA

E19
Wh varh
E20

E13
F

Functional earth
10mm²

-PE

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. PROTECTION RELAY S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
22 / 34
0 1 2 3 4 5 6 7 8 9

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
A

542 mm
B

XB011 XB012

F1 : PROTECTION RELAY SEPAM-S80


XB011 : CURRENT MEASURING TEST BOX
XB012 : CURRENT PROTECTION TEST BOX
S1 : CB CLOSE PUSH BUTTON (GREEN)
S2 : CB OPEN PUSH BUTTON (RED)
S3 : LOCAL - REMOTE SELECTOR SWITCH
S4 : LAMP TEST BUTTON (BLACK)
S6 : AUTO - MANUAL
TS1 : TRANSFER START
TSS : TRIP SELECTOR (QA - QAB - QB) F1
C

H2 : "CB OPEN" SIGNAL LAMP (GREEN)

592 mm
H3 : "CB CLOSED" SIGNAL LAMP (RED)
H4 : "TRIPPED" SIGNAL LAMP (YELLOW)
H5 : ATS READY SIGNAL LAMP ( WHITE)
D

H5 H4 H3 H2

TSS TS1 S6 S4 S3 S1 S2

AD1
E
F

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. LV BOX DOOR S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
23 / 34
0 1 2 3 4 5 6 7 8 9

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
PARTS LIST
SE_SET_Parts_list_rev7

(Component name) DT
A

DT PAGE PART REFERENCE QUANTITY DESIGNATION MANUFACTURER

-AP1 22 59659 1 ACE850FO, Communication Interface Schneider Electric

-CNA 10 3212120 2 Feed-through modular terminal block PT10 10mm2 Push-in connection PHOENIX CONTACT

-CNB 10 3212120 2 Feed-through modular terminal block PT10 10mm2 Push-in connection PHOENIX CONTACT

-CNC 10 3212120 2 Feed-through modular terminal block PT10 10mm2 Push-in connection PHOENIX CONTACT

-CND 10 3212120 2 Feed-through modular terminal block PT10 10mm2 Push-in connection PHOENIX CONTACT
B

-CNE 11 3212120 2 Feed-through modular terminal block PT10 10mm2 Push-in connection PHOENIX CONTACT

-CNF 11 3212120 2 Feed-through modular terminal block PT10 10mm2 Push-in connection PHOENIX CONTACT

-F1 22 SEPAMB83 1 Sepam B83, Busbars Protection Relay Schneider Electric

-F1 22 59715 3 MES120, 14 I/P + 6 O/P, 24-250 V DC Schneider Electric

-F25 22 59712 1 MCS025, Synchro check module Schneider Electric

-F25 22 59632 1 CCT640, VT voltage connector Schneider Electric


C

-F25 22 59665 1 CCA785, Synchro-check module connection cord, L 2 m Schneider Electric

-F25 22 59670 1 AMT840, mounting plate, 230 x 216 mm Schneider Electric

-H1 9 *VPIS 1 VOLTAGE PRESENCE INDICATING SYSTEM Schneider Electric

-H2 19 ZB5AV033 1 Harmony XB5 green pilot light head Ø22 plain lens for integral LED Schneider Electric

-H2 19 ZB5AVBG3 1 Harmony XB5 green light block with body/fixing collar integral LED 24...120V AC/DC Schneider Electric
D

-H2 19 ZBZ35 1 legend holder 30 x 50 mm with legend 18 x 27 mm unmarked Schneider Electric

-H3 19 ZB5AV043 1 Harmony XB5 red pilot light head Ø22 plain lens for integral LED Schneider Electric

-H3 19 ZB5AVBG4 1 Harmony XB5 red light block with body/fixing collar integral LED 24...120V AC/DC Schneider Electric

-H3 19 ZBZ35 1 legend holder 30 x 50 mm with legend 18 x 27 mm unmarked Schneider Electric

-H4 19 ZB5AV053 1 Harmony XB5 amber pilot light head Ø22 plain lens for integral LED Schneider Electric

-H4 19 ZB5AVBG5 1 Harmony XB5 amber light block with body/fixing collar integral LED 24...120V AC/DC Schneider Electric
E

-H4 19 ZBZ35 1 legend holder 30 x 50 mm with legend 18 x 27 mm unmarked Schneider Electric

-H5 19 ZB5AV013 1 Harmony XB5 white pilot light head Ø22 plain lens for integral LED Schneider Electric

-H5 19 ZB5AVBG1 1 Harmony XB5 white light block with body/fixing collar integral LED 24...120V AC/DC Schneider Electric

-H5 19 ZBZ35 1 legend holder 30 x 50 mm with legend 18 x 27 mm unmarked Schneider Electric

-HD1 11 NSYCCOHY230VID 1 Electronic hygrostat Schneider Electric


F

NOTES : (*) REFER TO GENERAL DRAWING FOR THE RATED VALUES. (**) REFER TO GENERAL DRAWING FOR SUPPLY VOLTAGE

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. PARTS LIST S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
24 / 34
0 1 2 3 4 5 6 7 8 9

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
PARTS LIST
SE_SET_Parts_list_rev7

(Component name) DT
A

DT PAGE PART REFERENCE QUANTITY DESIGNATION MANUFACTURER

HE09 9 51235873F0 1 HE09 Surge arresters TRDELTA

-KIT_ES 9 MC-KK-O-ES2 1 Earthing switch aux. contacts cable kit_cable outsource supply_Easypact SE TURKEY

-HL1 11 MC300001 1 LED LAMP 230V-4,5W JUPITER

-KEC1 12 RXM4AB2GD 1 Zelio RXM Miniature relay, 4 CO, Ith=6A, with LED indication, 125 VDC Schneider Electric

-KEC1 12 RXZE2M114M 1 Zelio socket RXZ - mixed contact, 10A - < 250V - connector - for relay RXM2.., RXM4.. Schneider Electric
B

-KIT_HT 11 MC-KK-O-HT 1 Heater cable kit_cable outsource supply SE TURKEY

-KTRP1 19 RXM4AB2GD 1 Zelio RXM Miniature relay, 4 CO, Ith=6A, with LED indication, 125 VDC Schneider Electric

-KTRP1 19 RXZE2M114M 1 Zelio socket RXZ - mixed contact, 10A - < 250V - connector - for relay RXM2.., RXM4.. Schneider Electric

-Q1 5 *EasyPact_CB 1 EasyPact VACUUM CIRCUIT BREAKER Schneider Electric

-Q2 9 *EASYPACT E/S 1 MV Earthing switch Schneider Electric

-Q3 10 A9N61526 1 Miniature circuit breaker C60H-DC, 2P, 6A, C Schneider Electric
C

-Q3 10 A9N26924 1 Auxiliary contact OF, ACTI9 Schneider Electric

-Q4 10 A9N61526 1 Miniature circuit breaker C60H-DC, 2P, 6A, C Schneider Electric

-Q4 10 A9N26924 1 Auxiliary contact OF, ACTI9 Schneider Electric

-Q6 10 A9N61526 1 Miniature circuit breaker C60H-DC, 2P, 6A, C Schneider Electric

-Q6 10 A9N26924 1 Auxiliary contact OF, ACTI9 Schneider Electric


D

-Q8 11 A9F84206 1 Miniature circuit breaker iC60H, 2P, 6A, C Schneider Electric

-Q8 11 A9A26924 1 Auxiliary contact iOF, iC60 Schneider Electric

-Q10 8 A9F84402 1 Miniature circuit breaker iC60H, 4P, 2A, C Schneider Electric

-Q10 8 A9A26924 1 Auxiliary contact iOF, iC60 Schneider Electric

-Q12 8 A9F84402 1 Miniature circuit breaker iC60H, 4P, 2A, C Schneider Electric

-Q12 8 A9A26924 1 Auxiliary contact iOF, iC60 Schneider Electric


E

-R1 11 26326007 1 Heating resistor 230V - 150W INTERISI

-S1 12 XB5AA31 1 Harmony XB5 green flush complete pushbutton Ø22 spring return 1NO unmarked Schneider Electric

-S1 12 ZBZ35 1 legend holder 30 x 50 mm with legend 18 x 27 mm unmarked Schneider Electric

-S2 13 ZB5AA4 1 Harmony XB5 red push button head Schneider Electric

-S2 13 ZB5AZ101 1 Harmony XB5 body with 1NO contact Schneider Electric
F

NOTES : (*) REFER TO GENERAL DRAWING FOR THE RATED VALUES. (**) REFER TO GENERAL DRAWING FOR SUPPLY VOLTAGE

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. PARTS LIST S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
25 / 34
0 1 2 3 4 5 6 7 8 9

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
PARTS LIST
SE_SET_Parts_list_rev7

(Component name) DT
A

DT PAGE PART REFERENCE QUANTITY DESIGNATION MANUFACTURER

-S2 13 ZBZ35 1 legend holder 30 x 50 mm with legend 18 x 27 mm unmarked Schneider Electric

-S3 12 XB5AG41 1 Harmony XB5 black selector Key switch head Ø22 2-position stay put 1NO Contact Key withdrawable in any position Schneider Electric

-S3 12 ZBE102 2 Harmony XB5 1NC contact Schneider Electric

-S3 12 ZBE101 1 Harmony XB5 1NO contact Schneider Electric

-S3 12 ZBZ35 1 legend holder 30 x 50 mm with legend 18 x 27 mm unmarked Schneider Electric


B

-S4 19 XB5AA21 1 Harmony XB5 black flush complete pushbutton Ø22 spring return 1NO unmarked Schneider Electric

-S4 19 ZBE101 3 Harmony XB5 1NO contact Schneider Electric

-S4 19 ZBZ35 1 legend holder 30 x 50 mm with legend 18 x 27 mm unmarked Schneider Electric

-S6 15 XB5AD21 1 Harmony XB5 black selector Standard switch head Ø22 2-position stay put 1NO Contact Schneider Electric

-S6 15 ZBE102 1 Harmony XB5 1NC contact Schneider Electric

-S6 15 ZBE101 3 Harmony XB5 1NO contact Schneider Electric


C

-S6 15 ZBZ35 1 legend holder 30 x 50 mm with legend 18 x 27 mm unmarked Schneider Electric

-ST1 11 NSYCCOTHC 1 Climasys Simple Thermosº C (NC Heat) Schneider Electric

-SW1 11 56160003 1 Limit switch for Blokset / Okken column light EMAS

-T1 6 *CT 1 Current Transformer ALCE

-T2 6 *CT 1 Current Transformer ALCE


D

-T3 6 *CT 1 Current Transformer ALCE

-TS1 15 XB5AA21 1 Harmony XB5 black flush complete pushbutton Ø22 spring return 1NO unmarked Schneider Electric

-TS1 15 ZBZ35 1 legend holder 30 x 50 mm with legend 18 x 27 mm unmarked Schneider Electric

-TSS 15 XB5AD21 1 Harmony XB5 black selector Standard switch head Ø22 2-position stay put 1NO Contact Schneider Electric

-TSS 15 ZBE102 1 Harmony XB5 1NC contact Schneider Electric

-TSS 15 ZBZ35 1 legend holder 30 x 50 mm with legend 18 x 27 mm unmarked Schneider Electric


E

-X20 5 HAN 42 DD 1 Module for female contacts HARTING

-X35 9 KL-721-120/037-047 1 LV FEMALE CONNECTOR MCS MIDI 0.08-2.5MM2-20X16A WAGO

-X36 9 KL-721-620/019-044 1 LV MALE CONNECTOR MCS MIDI 0.08-2.5MM2-20X16A WAGO

-X81 11 KL-721-102/037-047 1 LV FEMALE CONNECTOR MCS MIDI 0.08-2.5MM2-2X16A WAGO

-X82 11 KL-721-602/019-044 1 LV MALE CONNECTOR MCS MIDI 0.08 - 2.5MM2 - 2X16A WAGO
F

NOTES : (*) REFER TO GENERAL DRAWING FOR THE RATED VALUES. (**) REFER TO GENERAL DRAWING FOR SUPPLY VOLTAGE

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. PARTS LIST S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
26 / 34
0 1 2 3 4 5 6 7 8 9

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
PARTS LIST
SE_SET_Parts_list_rev7

(Component name) DT
A

DT PAGE PART REFERENCE QUANTITY DESIGNATION MANUFACTURER

-X101 5;12...14;19 3060351 32 Double-level terminal block PHOENIX CONTACT

-X101 5 3060393 1 End cover PHOENIX CONTACT

-XATS 21 3209510 16 Feed-through modular terminal block PT 2,5 mm² Push-in connection PHOENIX CONTACT

-XB01A 6 3026272 10 Test disconnect terminal block 6 mm² Screw connection PHOENIX CONTACT

-XB01B 7 3026272 10 Test disconnect terminal block 6 mm² Screw connection PHOENIX CONTACT
B

-XB5 9 3210567 7 Double-level terminal block PTTB 2,5 Push-in connection PHOENIX CONTACT

-XB7 20 3210567 13 Double-level terminal block PTTB 2,5 Push-in connection PHOENIX CONTACT

-XB11 6 3211757 4 Feed-through modular terminal block PT 4 mm² Push-in connection PHOENIX CONTACT

-XB011 6 HUA36712 1 YONG SUNG Current Test Block YONG SUNG

-XB012 7 HUA36712 1 YONG SUNG Current Test Block YONG SUNG

-XB21 8 3211757 8 Feed-through modular terminal block PT 4 mm² Push-in connection PHOENIX CONTACT
C

-XB22 8 PHN-3044131 8 UT6 Feed-through terminal block 6 mm² Screw connection PHOENIX CONTACT

-XB23 8 3211757 8 Feed-through modular terminal block PT 4 mm² Push-in connection PHOENIX CONTACT

-XBC1 12 3209510 8 Feed-through modular terminal block PT 2,5 mm² Push-in connection PHOENIX CONTACT

-XBH1 14;17;18 3210567 24 Double-level terminal block PTTB 2,5 Push-in connection PHOENIX CONTACT

-XBH2 15 3210567 14 Double-level terminal block PTTB 2,5 Push-in connection PHOENIX CONTACT
D

-XBH3 16 3210567 14 Double-level terminal block PTTB 2,5 Push-in connection PHOENIX CONTACT

-XBSP 20 3209510 10 Feed-through modular terminal block PT 2,5 mm² Push-in connection PHOENIX CONTACT

-XBSP 20 3209536 1 Ground modular terminal block PT 2,5-PE Push-in connection PHOENIX CONTACT

-XBT1 13 3209510 8 Feed-through modular terminal block PT 2,5 mm² Push-in connection PHOENIX CONTACT

-XH 11 3209510 16 Feed-through modular terminal block PT 2,5 mm² Push-in connection PHOENIX CONTACT

-XS1 10 3209510 10 Feed-through modular terminal block PT 2,5 mm² Push-in connection PHOENIX CONTACT
E

-XS2 10 3209510 10 Feed-through modular terminal block PT 2,5 mm² Push-in connection PHOENIX CONTACT

-XSO 17 3209510 4 Feed-through modular terminal block PT 2,5 mm² Push-in connection PHOENIX CONTACT
F

NOTES : (*) REFER TO GENERAL DRAWING FOR THE RATED VALUES. (**) REFER TO GENERAL DRAWING FOR SUPPLY VOLTAGE

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. PARTS LIST S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
27 / 34
0 1 2 3 4 5 6 7 8 9

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
TERMINAL DIAGRAM
SE_SET_Terminal_diagram_rev4
A

STRIP STRIP
CNA CNF
EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER
JUMPER JUMPER

Level 1 1 /10.1:B Level 1 1 /11.1:B

Level 1 2 /10.1:B Level 1 2 /11.1:B


B

STRIP STRIP
CNB X101
EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER
JUMPER JUMPER

Level 1 1 /10.1:C Level 1 1 /12.1:D

Level 1 2 /10.1:C Level 2 2 /12.1:F

Level 1 3 /12.3:D

STRIP Level 2 4 /13.4:D

CNC
C

Level 1 5 /13.3:D

EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER Level 2


JUMPER
6 /12.3:F

Level 1 7 /13.4:F
Level 1 1 /10.1:F Level 2 8 /13.3:F
Level 1 2 /10.1:F Level 1 9 /5.9:D

Level 2 10 /5.8:E
STRIP Level 1 11 /5.4:D
CND Level 2 12 /5.4:D
D

EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER


Level 1 13 /19.3:D
JUMPER

Level 2 14 /19.2:D
Level 1 1 /10.1:F
Level 1 15 /13.5:D
Level 1 2 /10.1:F
Level 2 16 /13.8:D

Level 1 17 /5.3:D
STRIP
Level 2 18 /5.3:D
CNE Level 1 19 /5.4:E
EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER
E

JUMPER Level 2 20 /19.3:B

Level 1 21 /13.4:D
Level 1 1 /11.1:A
Level 2 22 /5.3:E
Level 1 2 /11.1:A
Level 1 23 /5.6:D

Level 2 24 /5.6:F

Level 1 25 /5.6:D

Level 2 26 /5.6:F

Level 1 27 /5.5:D
F

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. TERMINAL DIAGRAM S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
28 / 34
0 1 2 3 4 5 6 7 8 9

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
TERMINAL DIAGRAM
SE_SET_Terminal_diagram_rev4
A

STRIP STRIP
X101 X101
EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER
JUMPER JUMPER

Level 2 28 /5.5:D Level 2 62 /5.6:F

Level 1 29 /5.6:E Level 1 63 /5.7:F

Level 2 30 /5.6:E Level 2 64 /5.7:F


B

Level 1 31 /5.5:E STRIP

Level 2 32 /5.5:E XATS


Level 1 EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER
33 /5.8:D
JUMPER
Level 2 34 /5.6:F

Level 1 Level 1 1 /21.1:B


35 /5.7:D

Level 2 Level 1 2 /21.1:E


36 /12.1:D

Level 1 Level 1 3 /21.2:B


37 /5.8:E

Level 2 Level 1 4 /21.2:E


38 /5.7:F
C

Level 1 Level 1 5 /21.3:B


39 /5.7:E

Level 2 Level 1 6 /21.3:E


40 /5.7:F

Level 1 Level 1 7 /21.4:B


41 /14.2:B

Level 2 Level 1 8 /21.4:E


42 /5.7:A

Level 1 Level 1 9 /21.5:B


43 /5.6:F

Level 2 Level 1 10 /21.5:E


44 /5.6:F

Level 1 Level 1 11 /21.6:B


45 /14.2:D

Level 2 Level 1 12 /21.6:E


46
D

/5.7:C

Level 1 Level 1 13 /21.6:B


47 /5.7:F

Level 2 Level 1 14 /21.6:E


48 /5.7:F

Level 1 Level 1 15 /21.7:B


49 /5.4:A

Level 2 Level 1 16 /21.7:E


50 /5.4:A

Level 1 51 /5.3:A

Level 2
STRIP
52 /5.4:C

Level 1 53 /5.4:C
XB01A
E

EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER


Level 2 54 /5.3:C JUMPER

Level 1 55 /12.2:B
Level 1 1 /6.3:B
Level 2 56 /5.6:A
Level 1 2 /6.3:B
Level 1 57 /5.5:A
Level 1 3 /6.3:C
Level 2 58 /12.2:C
Level 1 4 /6.3:C
Level 1 59 /5.6:C
Level 1 5 /6.3:C
Level 2 60 /5.5:C
Level 1 6 /6.3:C
Level 1 61 /5.6:F
F

Level 1 7 /6.3:C

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. TERMINAL DIAGRAM S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
29 / 34
0 1 2 3 4 5 6 7 8 9

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
TERMINAL DIAGRAM
SE_SET_Terminal_diagram_rev4
A

STRIP STRIP
XB01A XB5
EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER
JUMPER JUMPER

Level 1 8 /6.3:D Level 1 13 /9.8:C

Level 1 9 /6.3:D Level 2 14 /9.8:A

Level 1 10 /6.3:D STRIP


XB7
B

STRIP EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER


JUMPER
XB01B
EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER Level 1 1 /20.0:B
JUMPER
Level 2 2 /20.0:B

Level 1 1 /7.3:B Level 1 3 /20.0:D

Level 1 2 /7.3:B Level 2 4 /20.1:B

Level 1 3 /7.3:C Level 1 5 /20.1:B


C

Level 1 4 /7.3:C Level 2 6 /20.1:D

Level 1 5 /7.3:C Level 1 7 /20.3:B

Level 1 6 /7.3:C Level 2 8 /20.3:B

Level 1 7 /7.3:C Level 1 9 /20.3:D

Level 1 8 /7.3:D Level 2 10 /20.4:B

Level 1 9 /7.3:D Level 1 11 /20.4:B

Level 1 10 /7.3:D Level 2 12 /20.4:D

Level 1 13 /20.4:B
D

STRIP Level 2 14 /20.5:B

XB5 Level 1 15 /20.5:D

EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER Level 2


JUMPER
16 /20.5:B

Level 1 17 /20.5:B
Level 1 1 /9.4:A Level 2 18 /20.5:D
Level 2 2 /9.5:C Level 1 19 /20.6:B
Level 1 3 /9.5:A Level 2 20 /20.6:B
Level 2 4 /9.5:C
E

Level 1 21 /20.6:D
Level 1 5 /9.5:A Level 2 22 /20.6:B
Level 2 6 /9.6:C Level 1 23 /20.6:B
Level 1 7 /9.6:A Level 2 24 /20.6:D
Level 2 8 /9.6:C Level 1 25 /20.8:B
Level 1 9 /9.7:C Level 2 26 /20.8:D
Level 2 10 /9.7:A

Level 1 11 /9.7:C
F

Level 2 12 /9.7:A

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. TERMINAL DIAGRAM S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
30 / 34
0 1 2 3 4 5 6 7 8 9

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
TERMINAL DIAGRAM
SE_SET_Terminal_diagram_rev4
A

STRIP STRIP
XB11 XB23
EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER
JUMPER JUMPER

Level 1 1 /6.7:B Level 1 1 /8.1:D

Level 1 2 /6.7:B Level 1 2 /8.1:D

Level 1 3 /6.7:C Level 1 3 /8.1:E


B

Level 1 4 /6.7:C Level 1 4 /8.1:E

Level 1 5 /8.1:E

STRIP Level 1 6 /8.1:E

XB21 Level 1 7 /8.1:E

EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER Level 1


JUMPER
8 /8.1:E

Level 1 1 /8.1:A STRIP


Level 1 2 /8.1:A XBC1
C

Level 1 3 /8.1:A EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER


JUMPER
Level 1 4 /8.1:A

Level 1 5 /8.1:B Level 1 1 /12.3:A

Level 1 6 /8.1:B Level 1 2 /12.3:A

Level 1 7 /8.1:B Level 1 3 /12.4:A

Level 1 8 /8.1:B Level 1 4 /12.4:A

Level 1 5 /12.3:B

STRIP Level 1 6 /12.3:B


D

XB22 Level 1 7 /12.5:C

EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER Level 1


JUMPER
8 /12.5:C

Level 1 1 /8.1:C STRIP


Level 1 2 /8.1:C XBH1
Level 1 3 /8.1:C EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER
JUMPER
Level 1 4 /8.1:C

Level 1 5 /8.6:C Level 1 1 /14.1:B


E

Level 1 6 /8.6:C Level 2 2 /14.1:D

Level 1 7 /8.6:C Level 1 3 /14.1:B

Level 1 8 /8.6:C Level 2 4 /14.1:D

Level 1 5 /14.2:B

Level 2 6 /14.2:D

Level 1 7 /14.2:B

Level 2 8 /14.2:D
F

Level 1 9 /14.3:B

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. TERMINAL DIAGRAM S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
31 / 34
0 1 2 3 4 5 6 7 8 9

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
TERMINAL DIAGRAM
SE_SET_Terminal_diagram_rev4
A

STRIP STRIP
XBH1 XBH1
EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER
JUMPER JUMPER

Level 2 10 /14.3:D Level 2 55 /18.2:C

Level 1 11 /14.4:B Level 1 57 /18.3:C

Level 2 12 /14.4:D Level 2 59 /18.3:C


B

Level 1 13 /14.4:B Level 1 61 /18.4:C

Level 2 14 /14.4:D Level 2 63 /18.4:C

Level 1 15 /14.5:B STRIP

Level 2 16 /14.5:D XBH2


Level 1 EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER
17 /14.6:B
JUMPER
Level 2 18 /14.6:D

Level 1 Level 1 1 /15.0:B


19 /14.7:B

Level 2 Level 2 2 /15.0:D


20 /14.7:D
C

Level 1 Level 1 3 /15.1:B


21 /14.7:B

Level 2 Level 2 4 /15.1:D


22 /14.7:D

Level 1 Level 1 5 /15.1:B


23 /14.8:B

Level 2 Level 2 6 /15.1:D


24 /14.8:D

Level 1 Level 1 7 /15.2:B


25 /14.9:B

Level 2 Level 2 8 /15.2:D


26 /14.9:D

Level 1 Level 1 9 /15.2:B


27 /14.1:F

Level 2 Level 2 10 /15.2:D


28
D

/14.1:F

Level 1 Level 1 11 /15.3:B


29 /14.1:F

Level 2 Level 2 12 /15.3:D


30 /14.1:F

Level 1 Level 1 13 /15.4:B


31 /14.1:F

Level 2 Level 2 14 /15.4:D


32 /14.1:F

Level 1 Level 1 15 /15.4:B


33 /17.4:C

Level 2 Level 2 16 /15.4:D


35 /17.4:C

Level 1 Level 1 17 /15.5:B


37 /17.5:C
E

Level 2 Level 2 18 /15.5:D


39 /17.5:C

Level 1 Level 1 19 /15.6:B


41 /17.5:C

Level 2 Level 2 20 /15.6:D


43 /17.6:C

Level 1 Level 1 21 /15.7:B


45 /17.6:C

Level 2 Level 2 22 /15.7:D


47 /17.7:C

Level 1 Level 1 23 /15.7:B


49 /17.7:C

Level 2 Level 2 24 /15.7:D


51 /17.8:C

Level 1 Level 1 25 /15.8:B


53 /18.2:C
F

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. TERMINAL DIAGRAM S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
32 / 34
0 1 2 3 4 5 6 7 8 9

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
TERMINAL DIAGRAM
SE_SET_Terminal_diagram_rev4
A

STRIP STRIP
XBH2 XBH3
EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER
JUMPER JUMPER

Level 2 26 /15.8:D Level 2 28 /16.9:D

Level 1 27 /15.9:B STRIP

Level 2 28 /15.9:D XBSN


B

STRIP EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER


JUMPER
XBH3
EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER Level 1 1 /18.7:C
JUMPER
Level 2 2 /18.8:C

Level 1 1 /16.0:B Level 1 3 /18.8:C

Level 2 2 /16.0:D Level 2 4 /18.8:C

Level 1 3 /16.1:B Level 1 5 /18.9:C

Level 2 4 /16.1:D Level 2 6 /18.9:C


C

Level 1 5 /16.1:B STRIP

Level 2 6 /16.1:D XBSP


Level 1 EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER
7 /16.2:B
JUMPER
Level 2 8 /16.2:D

Level 1 Level 1 1 /20.8:A


9 /16.2:B

Level 2 Level 1 2 /20.8:A


10 /16.2:D

Level 1 Level 1 3 /20.8:A


11 /16.3:B

Level 2 Level 1 4 /20.9:A


12 /16.3:D
D

Level 1 Level 1 5 /20.9:A


13 /16.4:B

Level 2 Level 1 6 /20.9:A


14 /16.4:D

Level 1 Level 1 7 /20.9:A


15 /16.4:B

Level 2 Level 1 8 /20.9:A


16 /16.4:D

Level 1 Level 1 9 /20.9:A


17 /16.5:B

Level 2 Level 1 10 /20.9:A


18 /16.5:D

Level 1 Level 1 PE /20.9:A


19 /16.6:B
E

Level 2 20 /16.6:D

Level 1 21 /16.7:B

Level 2 22 /16.7:D

Level 1 23 /16.7:B

Level 2 24 /16.7:D

Level 1 25 /16.8:B

Level 2 26 /16.8:D

Level 1 27 /16.9:B
F

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. TERMINAL DIAGRAM S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
33 / 34
0 1 2 3 4 5 6 7 8 9

The technical information contained in this document is the exclusive property of Schneider Electric and can not be used or disclosed to third parties of any kind without its written consent. Only those drawings and diagrams remitted after order booking are binding for execution. All devices shown in this diagrams are in open position, drawn out with operating mechanisms discharged and all power sources off.
TERMINAL DIAGRAM
SE_SET_Terminal_diagram_rev4
A

STRIP STRIP
XBT1 XS1
EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER
JUMPER JUMPER

Level 1 1 /13.4:A Level 1 2 /10.4:B

Level 1 2 /13.4:A Level 1 3 /10.5:B

Level 1 3 /13.4:B Level 1 4 /10.5:B


B

Level 1 4 /13.4:B Level 1 5 /10.5:B

Level 1 5 /13.4:A Level 1 6 /10.5:B

Level 1 6 /13.5:A Level 1 7 /10.6:B

Level 1 7 /13.4:B Level 1 8 /10.6:B

Level 1 8 /13.5:B Level 1 9 /10.6:B

Level 1 10 /10.7:B

STRIP
XH STRIP
C

EXTERNAL WIRE JUMPER SADDLE


JUMPER
INTERNAL WIRE JUMPER XS2
EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER
JUMPER
Level 1 1 /11.3:A

Level 1 2 /11.3:A Level 1 1 /10.4:C

Level 1 3 /11.4:A Level 1 2 /10.4:C

Level 1 4 /11.4:A Level 1 3 /10.5:C

Level 1 5 /11.4:A Level 1 4 /10.5:C

Level 1 6 /11.3:B Level 1 5 /10.5:C


D

Level 1 7 /11.3:B Level 1 6 /10.6:C

Level 1 8 /11.4:B Level 1 7 /10.6:C

Level 1 9 /11.4:B Level 1 8 /10.6:C

Level 1 10 /11.4:B Level 1 9 /10.6:C

Level 1 11 /11.4:B Level 1 10 /10.7:C

Level 1 12 /11.5:B

Level 1 13 /11.7:C STRIP


XSO
E

Level 1 14 /11.7:C

Level 1 EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER


15 /11.8:C
JUMPER
Level 1 16 /11.8:C
Level 1 1 /17.0:C

STRIP Level 1 2 /17.1:C

XS1 Level 1 3 /17.1:C

EXTERNAL WIRE JUMPER SADDLE INTERNAL WIRE JUMPER Level 1 4 /17.2:C


JUMPER
F

Level 1 1 /10.4:B

REVISIONS : 0 SCHNEIDER ELECTRIC , TURKEY CUSTOMER NAME PAGE DESCRIPTION PROJECT == =


In the fourth harbor engineering investigation and Design Institute Co. TERMINAL DIAGRAM S21001.15 ++ + PAGE
PROJECT DESCRIPTION DRAWING DESCRIPTION bFO OPP # DRAWING NUMBER
SONATRACH SKIKDA EXTENSION PROJECT COUPLER-1 OP-191114-9075524 S2100115-06
34 / 34

You might also like