2.8.2 Network Cabling
‘The Multdep line is made using RUA5 connector: and a cable having the following
specications:
twisted pair AWG 24 wires
+ 120Mimpedance
FTWERUA Aue! «maximum network cable length 1200 meters
Pin Function
orminoe bitty RSaas +
cranien, — RS.485-
Voc -
Ve =
No
Woe «
voc:
voc. :
atts 2
S486
1 4
‘wled Par -RS-485 bs
\When wiring the muttidrop cables, note the following
e Pin 8 (or 7) can be connected only ifthe power has to be propagated fram a cradle to a
STARGATE™ base station or STAR-Box™ converter via the cable,
| Pins 5 (or 4) should always be connacted as reference ground.
To avoid excessive voltage drop, itis recommended not to propagate power betwoen
| BC-8060 cradles when used as battery chargers but to supply each cradle
individually. The total number of devices, which can be connected to a single power
Suppy, depends on the power supply voltage, the wre length and resstance and109736665_Abschlusswiderstand_serielle Baugruppen_05_v0.3_.
ET 200S 1S!
(Terminal assignment for RS485 communication)
Terminating
resistor
=3300
RIT (B) +
bttps://cache.industry.siemens.com/dUfiles'665/109736665/img_2.
18.3, 2019, 16:36