Professional Documents
Culture Documents
Payload Calibration 775 (VIMS) - 2
Payload Calibration 775 (VIMS) - 2
Page 1 of 2
Shutdown SIS
Previous Screen
Product: TRUCK
Model: 775F TRUCK DLS01527
Configuration: 775F Off-Highway Truck DLS00001-UP (MACHINE) POWERED BY C27 Engine
Systems Operation
770, 772, 773E, 773F, 777E and 777F Off-Highway Trucks and 775F Quarry Truck VIMS
Truck Payload System
Media Number -RENR8284-06 Publication Date -01/09/2015 Date Updated -09/05/2017
i02564524
The payload system must be calibrated if the VIMSpc software is used to assign a new serial number
to the VIMS/TPMS electronic control module (ECM). The Truck Payload Measurement System
(TPMS) must also be calibrated after the replacement of the VIMS/TPMS ECM, the suspension
cylinders, the suspension cylinder pressure sensors, etc.
The following information describes the service operation of the calibration for the truck payload. The
service operation uses the following procedure in order to calibrate the VIMS TPMS:
Note: The VIMS TPMS will not operate until a successful payload calibration has been completed.
Security
1. This service program code only functions while the service tool (VIMSpc) is connected.
2. After the service tool (VIMSpc) is disconnected for 30 seconds, this service program code will
no longer be active.
Procedure
1. Ensure that the truck body is empty. Carryback weight will affect the payload measurement.
2. Manually calibrate the payload system by pressing the "OK" button. The "OK" button is located
in the Payload Calibration menu option.
3. Operate the empty truck to a minimum ground speed of four MPH on hard level ground.
4. Move the transmission gear selector to the neutral position and allow the truck to coast to a
stop. Do not use the service brakes or the retarder.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 7/28/2020
775F Off-Highway Truck DLS00001-UP (MACHINE) POWERED BY C27 Engine(SEB... Page 2 of 2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 7/28/2020