Professional Documents
Culture Documents
Msds Sodium Metabisulphite
Msds Sodium Metabisulphite
SODIUM METABISULPHITE
Revision : 00 Date: 05.03.2019 MSDS Number : 3407
For the full text of the H-Statements mentioned in this Section, see Section 16
Pictogram
Precautionary statement(s)
P280 Wear eye protection/ face protection.
P301 + P312 + P330 IF SWALLOWED: Call a POISON CENTER/doctor if you
feel unwell. Rinse mouth.
P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with water for several
minutes. Remove contact lenses, if present and easy to do.
Continue rinsing. Immediately call a POISON
CENTER/doctor.
SODIUM METABISULPHITE
Revision : 00 Date: 05.03.2019 MSDS Number : 3407
3.1 Substances
Synonyms : Sodium pyrosulfite, Disulfite, Pyrosulfite, sodium disulfite
Formula : Na₂S₂O₅
Molecular weight : 190.10 g/mol
CAS-No. : 7681-57-4
EC-No. : 231-673-0
Index-No. : 016-063-00-2
For the full text of the H-Statements mentioned in this Section, see Section 16.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
SODIUM METABISULPHITE
Revision : 00 Date: 05.03.2019 MSDS Number : 3407
4.3 Indication of any immediate medical attention and special treatment needed
No data available
SODIUM METABISULPHITE
Revision : 00 Date: 05.03.2019 MSDS Number : 3407
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal
technique (without touching glove's outer surface) to avoid skin contact with this product.
Dispose of contaminated gloves after use in accordance with applicable laws and good
laboratory practices. Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC
and the standard EN 374 derived from it.
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0.11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740, Size M)
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0.11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740, Size M)
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be
selected according to the concentration and amount of the dangerous substance at the specific
workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use (EN 143)
respirator cartridges as a backup to engineering controls. If th full-face supplied air
respirator. Use respirators and components tested and approved under appropriate
government standards such as NIOSH (US) or CEN (EU).
SODIUM METABISULPHITE
Revision : 00 Date: 05.03.2019 MSDS Number : 3407
Colour: colourless
Odour pungent
Odour Threshold No data available
pH 4.5 at 50 g/l at 20 °C
Melting point/freezingpoint 300 °C.
Initial boiling point and boiling range No data available
Flash point No data available
Evaporation rate No data available
Flammability (solid, gas) No data available
Upper/lower flammability or No data available
explosive limits
Vapour pressure No data available
Vapour density No data available
Relative density 1.480 g/cm3
Water solubility 650 g/l at 20 °C
Partition coefficient: noctanol/water log Pow: -3.699 at 25 °C
Auto-ignition temperature No data available
Decomposition temperature No data available
Viscosity No data available
Explosive properties No data available
Oxidizing properties No data available
10.1 Reactivity
No data available
SODIUM METABISULPHITE
Revision : 00 Date: 05.03.2019 MSDS Number : 3407
Skin corrosion/irritation
No data available(Sodium metabisulphite)
Carcinogenicity
IARC: 3 - Group 3: Not classifiable as to its carcinogenicity to humans (Sodium
metabisulphite)
Reproductive toxicity
No data available(Sodium metabisulphite).
Aspiration hazard
No data available(Sodium metabisulphite)
Additional Information
RTECS: UX8225000
Symptoms of exposure may include burning sensation, coughing, wheezing, laryngitis, shortness of breath,
headache, nausea, and vomiting., chest pain, Difficulty in breathing, Gastrointestinal discomfort,
Vomiting, Diarrhoea, Persons with allergies and/or asthma may exhibit hypersensitivity to sulfites., To the
best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly
investigated.(Sodium metabisulphite)
12.1 Toxicity
Toxicity to fish
LC50 - Oncorhynchus mykiss (rainbow trout) - 150 - 220 mg/l - 96 h(Sodium metabisulphite)
SODIUM METABISULPHITE
Revision : 00 Date: 05.03.2019 MSDS Number : 3407
Toxicity to algae
IC50 - Desmodesmus subspicatus (green algae) - 48 mg/l - 72 h(Sodium metabisulphite)
Toxicity to bacteria –
Pseudomonas putida - 56 mg/l - 17 h(Sodium metabisulphite)
Contaminated packaging
Dispose of as unused product.
14.1 UN number
ADR/RID: - IMDG: - IATA: -
14.2 UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Passenger Aircraft: Not permitted for transport
14.3 Transport hazard class(es)
ADR/RID: - IMDG : - IATA: -
14.4 Packaging group
ADR/RID: - IMDG: - IATA: -
14.5 Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
14.6 Special precautions for user
No data available
SODIUM METABISULPHITE
Revision : 00 Date: 05.03.2019 MSDS Number : 3407
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.2 Chemical safety assessment
For this product a chemical safety assessment was not carried out
HMIS (U.S.A.):
Health Hazard: 2
Fire Hazard: 0
Reactivity: 1
Personal Protection: -
Further information
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as
a guide. The information in this document is based on the present state of our knowledge and is applicable to
the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties
of the product. PT. Smartlab Indonesia Corporation and its Affiliates shall not be held liable for any damage
resulting from handling or from contact with the above product. See www.sigmaaldrich.com and/or the reverse
side of invoice or packing slip for additional terms and conditions of sale.