Professional Documents
Culture Documents
Cable Trunking 50085
Cable Trunking 50085
Cable Trunking 50085
CLASSIFICATION
According to material.
According to resistance to impact for installation and application.
According to temperature.
According to resistance to flame propagation.
According to electrical continuity characteristics.
According to electrical insulating characteristics.
According to degrees of protection provided by enclosure.
According to protection against corrosive substance.
According to the system access cover retention.
According to electrically protective separation.
TEMPERATURE
Mini. installation and application temp Maximum application temp
-25 +60
-15 +90
-5 +105
+5 +120
+15
MECHANICAL PROPERTY
IMPACT TEST
Sample length=250mm
Mass of hammer Is 0.5kg.
Fall height is 100mm.
The intermediate part is made in a steel 20mm diameter cylinder.
Its lower surface has a 300mm bending radius and it mass is 100g.
Before the test, non-metallic and composite component are aged at the
particular temp at a 168 hours.
After 2 hour, sample remove from refrigerator and immediately placed on
the apparatus.
Then impact test is carried out after 12 seconds.
After the test the sample doesn’t show any crack or disintegration.
IMPEDANCE TEST
Force 20N
Sheet thick 3mm