Professional Documents
Culture Documents
Auto Start & Load Share Control Module: Genset
Auto Start & Load Share Control Module: Genset
DSEGenset
ELECTRO-MAGNETIC COMPATIBILITY
The DSE7510 is an Automatic Engine A sophisticated module monitoring MODULE CAPABILITIES TEMPERATURE
Control Module, designed to provide an extensive number of engine • Fixed export with mains (utility) BS EN 60068-2-1
Ab/Ae Cold Test -30 oC
advanced load share functionality for parameters, the DSE7510 will supply BS EN 60068-2-2
diesel and gas generating sets that annunciate engine shutdowns, • Synchronising up to 16 gen-sets Bb/Be Dry Heat +70 oC
include electronic and non-electronic warnings, and engine status VIBRATION
engines. information on the back-lit LCD The module has sophisticated engine BS EN 60068-2-6
screen, by illuminated LED, on a and power monitoring, high level Ten sweeps in each of three
major axes
The module’s load share functions remote PC, by audible alarm and via instrumentation and flexible timers 5 Hz to 8 Hz @ +/-7.5 mm,
include automatic synchronising with SMS text alerts (GSM modem and alarms, making the system 8 Hz to 500 Hz @ 2 gn
built-in synchroscope and closing required). The module includes suitable for a wide range of HUMIDITY
onto dead bus. Direct and flexible RS232 and RS485 ports as well as synchronising applications. BS EN 60068-2-30
outputs from the module are dedicated terminals for system Db Damp Heat Cyclic 20/55 oC
@ 95% RH 48 Hours
provided to allow connection to the expansion. DSE7560 is required to synchronise BS EN 60068-2-78
most commonly used speed with the mains (utility). Cab Damp Heat Static 40 oC
@ 93% RH 48 Hours
governors and automatic voltage
regulators (AVRs). SHOCK
BS EN 60068-2-27
Three shocks in each of three major axes
15 gn in 11 mS
DEGREES OF PROTECTION
PROVIDED BY ENCLOSURES
BS EN 60529
IP65 - Front of module when installed into the
COMPREHENSIVE FEATURE LIST TO SUIT A control panel with the supplied sealing gasket.
232 485
DEUTZ
DSE7510 MSC ISUZU
PERKINS
CATERPILLAR
MTU
7 7510 7510 7560 VOLVO
CUMMINS
OTHER SCANIA
BUS VOLT FREE GENERATOR SENSING FUEL & CRANK CHARGE ELECTRONIC MAGNETIC
SENSING OUTPUTS OUTPUTS ALTERNATOR ENGINES PICK-UP
CURRENT VOLTS D+
+ W/L
ISSUE 6
®
DSEGenset
DSE7510 SPECIFICATION
DC SUPPLY
CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing
supply was at least 10 V before dropout and
supply recovers to 5 V. This is achieved
FEATURES without the need for internal batteries
OUTPUTS
OUTPUT A (FUEL)
15 A DC at supply voltage
OUTPUT B (START)
15 A DC at supply voltage
OUTPUTS C & D
8 A 250 V (Volt free)
• Sequential start • Event log (25) • Real-time clock provides FREQUENCY RANGE
• Auto ID negotiation • CAN and Magnetic Pick-up/Alt. accurate event logging 3.5 Hz to 75 Hz
• Direct governor and AVR sensing • Remote monitoring of module MAGNETIC PICK UP
communication and control • Engine protection alarms using comprehensive DSE7500 VOLTAGE RANGE
• Manual voltage, frequency and • Low fuel alarms PC software +/- 0.5 V to 70 V
speed adjustment • Charge Alternator failure warning • Sends SMS messages to notify FREQUENCY RANGE
• Volts and frequency matching • Manual speed control (on engineers of specific generator 10,000 Hz (max)
• Dead bus sensing compatible CAN engines) problems (GSM modem and SIM
BUILT-IN GOVERNOR CONTROL
• Generator load demand • Engine exercise scheduler card required) Fully Isolated
• kW and kV Ar load sharing • Automatic load transfer • Ethernet communications (via Minimum Load Impedance:
1000Ω
• kW on mains (utility) level • kW overload protection DSE860/865 modules), provides Gain Volts 0 V - 10 V DC
• Automatic hours run balancing • Unbalanced load protection advanced remote monitoring at Offset Volts + / - 10 V DC
• R.O.C.O.F & Vector Shift • Independent Earth Fault trip low cost
BUILT-IN AVR CONTROL
• Mains (utility) decoupling test • Audible alarm • Modules can be integrated into Fully Isolated
facility • Backed-up real-time clock building management systems Minimum Load Impedance: 1000Ω
Gain Volts 0 V - 10 V DC
• Fully configurable via by (BMS) Offset Volts + / - 10 V DC
KEY FEATURES DSE7500 PC software • Surplus energy / power can be
• 4-Line back-lit LCD text display • Configurable display languages sold back to the grid (subject to DIMENSIONS
OVERALL
• Five key menu navigation • Remote SCADA monitoring via local mains/utility supplier) 240 mm x 172 mm x 57 mm
• Front panel editing with PIN DSE7500 PC software • Licence-free PC software 9.4” x 6.8” x 2.2”
protection • User selectable RS232 and • IP65 rating (with supplied gasket) PANEL CUTOUT
• Multiple display languages RS485 communications offers advanced resistance to 220 mm x 160 mm
• LED and LCD alarm indication • SMS Messaging (additional water ingress 8.7” x 6.3”
• Customisable status screens external modem required) MAXIMUM PANEL THICKNESS
• 9 configurable inputs • Built-in governor and AVR control 8 mm
0.3”
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649 055-065/08/10 (6) US
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457