Professional Documents
Culture Documents
Bandes Sika PVC
Bandes Sika PVC
Description
SIKA PVC water arresting strips are based on a high-grade heat-sealing synthetic material.
Colour: yellow.
General characteristics
Withstands pressures up to 40 m water head.
Safe utilisation owing to the multiple anchoring points on the strip sides ensuring the water
flow retention without any risk of concrete tearing.
The joint waterproofing is additionally ensured by a COMBIFLEX system or an elastomer
sealant on a backing roll.
Stability of initial elongation characteristics in time.
Easy to seal (heat-sealing PVC).
Applications
APPROX ALLOWABLE
ALLOWABLE
TYPE OF WEIGHT(g) PRESSURE
l e d DISPLACEMENT
STRIP LINEAR / METRE
(cm)
METRE OF WATER
l
Shrinkage joint
Expansion joint
d
Expansion joint
with shearing d e
Construction joints
5
Expansion joints
1
BANDES SIKA ® PVC
Packaging
Storage
Requires no particular precautions.
2
BANDES SIKA ® PVC
Instructions
The strip is arranged in the formwork so that it be embedded over half its width while casting
ÀÀÀ
,,,
@@@
the concrete.
The anchoring ends are secured mechanically around the reinforcing bars (see sketch).
Minimum distance “L” between the strip and the concrete surface is given in the table below:
ÀÀÀ
,,,
@@@
Type of strip L in mm
L
,,,
@@@
ÀÀÀ
O 15 70
O 22 - V 20 - M 22 100
M 35 150
,,,,,
@@@@@
ÀÀÀÀÀ
For obtaining a continuous bonding between concrete and SIKA strip, place the concrete
added with a plasticiser (PLASTIMENT BV 40) and ensure a proper VIBRATION while
@@@@@
ÀÀÀÀÀ
,,,,,
keeping the vibrating machine about 10 centimetres away from the strip.
@@@@@
ÀÀÀÀÀ
,,,,,
Formwork
,,,,
Reinforcing bar
Mechanical fastening
,,,,,
@@@@@
ÀÀÀÀÀ
V TYPE: strips embedded for construction joints exposed to pressures < 15-m water head.
@@@@@
ÀÀÀÀÀ
,,,,,
Polystyrene
Formwork
@@@@@
ÀÀÀÀÀ
,,,,,
,,
Reinforcing bar
Mechanical fastening
,,,,
@@@@
ÀÀÀÀ
O TYPE: strips embedded for expansion joints exposed to pressures < 25-m water head.
The strip can be secured directly on the formwork by folding it (as shown on the above
sketch). After removal of the formwork, the folded portion is restored to its normal position
,,,,
@@@@
ÀÀÀÀ
for casting concrete again.
,,,,
@@@@
ÀÀÀÀ
Formwork
,,
,,,,
@@@@
ÀÀÀÀ
,
Reinforcing
Armature bar Backing roll
Mechanical fastening
M TYPE: strips embedded for construction joints exposed to pressures < 40-m water head.
The upper portion of the bellows faces the pressure. To prevent concrete from entering the
bellows and preserve the strip elasticity, insert a SIKA backing roll or expanded polystyrene
type packing in the bellows.
SEALING
The ends are heated for sealing. As soon as the material starts to fuse (white smoke) the
ends are applied against each other and held in position until cooling.
The seal can be reinforced by adding some material heated using a heating-blade blowpipe
like a FORPLAST – LEISTER hot blowout gun fitted with a Teflon-lined nozzle 62 A).
3
BANDES SIKA ® PVC
JUNCTION PIECES
The waterproofing of intersecting joints, or joints that are perpendicular to another joint
requires the use of suitably shaped prefab pieces.
Custom-made special pieces (arm free length: 30 cm).
The calculation of strip length will take prefab pieces into account.
Product for strictly professional use only. «The information, and, in particular, the arising out of any legal relationship whatsoever,
«The product described in this data sheet is covered recommandations relating to the application and can be inferred either from this information, or
under the manufacturer’s product liability policy».
end-use of SIKA products, are given in good from any written recommendations, or from any
faith based on SIKA’s current knowledge and other advice offered. The proprietary rights of
experience of the products when properly stored, third parties must be observed. All orders are
handled and applied under normal conditions. accepted subject to our current terms of sale
Sika El Djazair In practice, the differences in materials, and delivery. Users should always refer to the
08 route de l’Arbaa, 16111 Eucalyptus Alger/ ALGERIE
substrates and actual site conditions are such most recent issue of the french version of the
Tel.: 213 (0) 21 50 21 84 - 213 (0) 21 50 16 92 à 95
Fax: 213 (0) 21 50 22 08 that no warranty in respect of merchantability or Technical Data Sheet for the produt concerned,
Web : dza.sika.com of fitness for a particular purpose, nor any liability copies of which will be supplied on request».