Professional Documents
Culture Documents
U20 FW Update Instruction
U20 FW Update Instruction
***********************************************************************************
****/
/* Alfawise U20 Firmware Update Instruction
*/
/
***********************************************************************************
****/
Step 2: Correctly insert micro SD card in card reader, then plug the card reader
into usb port of computer.
Step 3: Copy the "project.bin" and "Longer3D.UI" two files to the root directory of
your micro SD card.
Step 4: Insert prepared micro SD card into printer, then reboot your printer, and
update will starts automatically.
Normally, the screen of printer shows two progress bar(first one for images
of user-interface, the second one for main program).
Update progress usually lasts about 30 seconds with fast blink of blue LED
light.
In common, the screen would jumps to the home menu after finishing update.
If not, please check your steps, and repeat again. If it still fails, format
or change your micro SD card and try again.
Step 5: Congratulations! Now, you can freely operate your printer with new
firmware;
But, don't forget to delete the two files of "step 3" in your micro SD card,
otherwise update will unnecessarily repeats when printer boots.