Professional Documents
Culture Documents
SSR Plugs Systems
SSR Plugs Systems
Cementing Plugs
April 2005
DN002967
4.9-1
Cementing Plugs
Lengtha in. (mm) 16.11 (409.2) 17.30 (439.4) 18.10 (459.7) 20.67 (525.0) 20.51 (521.0) 20.71 (526.0) 20.51 (521.0) 20.60 (523.2) 21.26 (540.0) 21.32 (541.5) 20.45 (519.4) 21.19 (538.2) 22.67 (575.8) 20.45 (519.4) 23.25 (590.6) 23.35 (593.1) 22.47 (570.7) 22.15 (562.6)
3 1/2 (88.9) 2 7/8 (73.0) 3 1/2 (88.9) 5 1/2 (139.7) 4 1/2 (114.3) 5 (127.0) 4 (101.6) 6 (152.4) 4 1/2 (114.3) 6 5/8 (168.3) 4 1/2 (114.3) 4 1/2 (114.3) 5 (127.0) 7 (177.8) 5 1/2 (139.7) 6 (152.4) 6 5/8 (168.3) 4 1/2 (114.3) 5 (127.0) 7 5/8 (193.7) 5 1/2 (139.7) 7 (177.8) 4 1/2 (114.3) 5 1/2 (139.7) 8 5/8 (219.1) 6 5/8 (168.3) 7 (177.8) 7 5/8 (193.7) 5 1/2 (139.7) 7 (177.8) 9 5/8 (244.5) 7 5/8 (193.7) 8 5/8 (219.1) 10 3/4 9 5/8 7 (273.1 244.5 177.8) 7 (177.8) 10 3/4 (273.1) 7 5/8 (193.7) 8 5/8 (219.1) 9 5/8 (244.5) 9 5/8 (244.5) 8 5/8 (219.1) 9 5/8 (244.5) 10 3/4 (273.1) 11 3/4 (298.5) 10 3/4 (273.1) 13 3/8 (339.7)
22.87 (580.9)
28.12 (714.2)
22.73 (577.3)
22.64 (575.1) 26.37 (669.8) 26.92 (683.8) 26.97 (685.0) 29.07 (738.4) 28.45 (722.6) 16.50 (419.1)
16 (406.4)
a
The top combination plug is longer than a standard five-wiper plug and may require either an extension on the plug container or a double plug container. b Oil resistant c Wooden
4.9-2
April 2005
Cementing Plugs
The bottom combination plug is longer than a standard five-wiper plug and may require either an extension on the plug container or a double plug container. Oil resistant
April 2005
DN002968
4.9-3
Cementing Plugs
Table 4.9.3.A24-Tooth NR Combination Top Plug Large Casing OD in. (mm) 7 5/8 (193.7) 9 5/8 (244.5) 10 3/4 (273.1) 11 3/4 (298.5) 13 3/8 (339.7) 16 (406.4)
a
Small Casing OD in. (mm) 6 5/8 (168.3) 7 (177.8) 7 (177.8) 7 (177.8) 8 5/8 (219.1) 9 5/8 (244.5) 9 5/8 (244.5) 10 3/4 (273.1) 13 3/8 (339.7)
Part No. 400.00690 400.01035 400.00515 (101004703) 400.00550 (101001139) 400.00540 400.01075 (101004744) 402.17203 (101002015) 400.01210 (120021880) 400.01065 (101001879)
Aa in. (mm) 23.10 (586.7) 22.83 (579.9) 22.66 (575.6) 22.59 (573.8) 22.85 (580.4) 27.76 (705.1) 27.62 (692.4) 26.94 (684.3) 45.64 (1159.3)
The top/bottom plug is larger than the standard five-wiper plug and may require either an extension on the plug container or a double plug container.
4.9-4
DN002961
April 2005
Cementing Plugs
Small Casing OD in. (mm) 7 (177.8) 7 (177.8) 7 (177.8) 9 5/8 (244.5) 9 5/8 (244.5) 13 3/8 (339.7)
Part No. 101004879 400.01300 (100059523) 400.01700b 400.01080 (101004753) 404.34203b (101002001) 400.01070c (101002077)
Aa in. (mm) 21.12 (536.4) 24.12 (612.1) 24.23 (615.4) 21.12 (536.4) 22.00 (558.8) 42.64 (1082.5)
The bottom combination plug is longer than a standard cementing plug and may require either an extension on the plug container or a double plug container. STD diaphragm
b c
Bypass
April 2005
DN002964
4.9-5
Cementing Plugs
Notes
4.9-6
April 2005
Cementing Plugs
DN002937
April 2005
DN002942
4.10-1
Cementing Plugs
4.10-2
DN002936
April 2005
Cementing Plugs
2 3/8 (60.3)
DN002938
6.5 (9.7) 6.4 to 7.9 (9.52 to 11.76) 6.4 (9.52) 9.3 (13.84) 7.7 to 10.2 (11.46 to 15.18) 2.375 (60.3) 1.875 (47.6)
1.500 (38.1)
3 1/2 (88.9)
April 2005
4.10-3
Cementing Plugs
Table 4.10.2.AOmega Five-Wiper Latchdown Plugsa Tubing OD in. (mm) Plug Part No. 801.03128 (100072715) 101386000b 801.03122 (100004360) 801.02956 (100072691) 801.0295 (100004353) 801.02958 (100004354) A in. (mm) 14.14 (359.2) 13.85 (351.8) 14.20 (360.7) B in. (mm) 1.62 (41.2) Baffle ID in. (mm) 1.50 (38.1)
2 7/8 (73.0)
2.12 (53.8)
DN002939
1.875 (47.6)
14.80 (375.9)
4.10-4
April 2005
Cementing Plugs
2 7/8 (73.0)
801.0293 (100004351)
10.20 (259.1)
2.24 (56.9)
DN002941
2.000 (50.8)
3 1/2 (88.9)
801.02993
2.375 (60.3)
April 2005
4.10-5
Cementing Plugs
Notes
4.10-6
April 2005
Cementing Plugs
For both types, a latchdown baffle must be placed in the casing as the plug is being run in the hole. The baffle is typically installed one or two joints above the guide or float shoe. The drillable baffle is undercut to receive the snap ring of the plug nose. Halliburton cementing plugs are supplied for use with water-, oil-, and synthetic-based fluid systems. In most cases, proper plug selection is required to help ensure rubber/fluid compatibility. Caution should be used when using plugs with oil-/syntheticbased drilling fluids. For more information about plug/fluid compatibility, contact Tool Systems in the Duncan Technology Center.
April 2005
DN002945
4.11-1
Cementing Plugs
B
DN002944
Casing Weight lb/ft (kg/m) 10.5 to 15.1 (15.63 to 22.47) 13 to 18 (19.35 to 26.79) 13 to 23 (19.35 to 34.23) 20 to 35 (29.77 to 52.09) 24 to 44 (35.7 to 65.5) 32.3 to 53.5 (48.07 to 79.62) 51.0 to 65.7 (75.9 to 97.8)
Latchdown Baffle Latchdown Plug A 8rd Buttress ID B Part No. in. (mm) in. (mm) Part No. Part No. in. (mm) 801.03734 (100004364) 2.375 809.81300 15.38 2.56 CI AL (390.7) (65.0) (60.3) 801.03243 CI 801.03743 2.875 812.01689 AL 17.39 3.16 (100013747) (73.0) (100013901) (441.8) (80.3) CI 812.03195 801.03763 801.03259 21.40 4.18 CI (100072766) CI (543.6) (106.2) 812.03200 CI AL 801.03282 CI 801.03301 21.30 801.033a 3.800 CI (541.0) CI (96.5) 813.21492 813.21492 812.0618 20.96 (101203157) 4.18 AL CI (532.4) AL (106.2) 812.0619 20.70 812.06189a CI (525.8) 812.0753 25.00 812.07532a CI (635.0)
5.5 (139.7) 7.0 (177.8) 7.62 (193.8) 8.62 (218.9) 9.62 (244.5) 10.75 (273.0) 13.38 (399.9)
Baffle is cemented in an adapter that installs in the casing string. ALAluminum CICast iron
4.11-2
April 2005
Cementing Plugs
DN002946
Table 4.11.2.AThree-Wiper Latchdown Plugsa Casing OD in. (mm) Thread 8rd 9.5 lb (14.14 kg) 8rd 10.5 to 15.1 lb (15.63 to 22.47 kg) Part No. A in. (mm) B in. (mm) Baffle ID in. (mm)
4 1/2 (114.3)
801.0373 (100013745)
9.80 (248.9)
2.65 (67.3)
2.375 (60.3)
8rd
April 2005
DN002947
4.11-3
Cementing Plugs
Table 4.11.3.AAluminum MSC Casing Omega Latchdown Plugsa A Casing OD B C Thread Part No. in. (mm) in. (mm) in. (mm) in. (mm) 4 1/2 801.0298 4.50 2.56 19.90 8rd (100072694) (114.3) (65.0) (505.5) (114.3)
a
4.11-4
April 2005
Cementing Plugs
April 2005
4.12-1
DN003105
Cementing Plugs
DN003106
4.12-2
April 2005
DN003107
Cementing Plugs
Combination NR SSR top plug (NR-plastic insert) Combination NR SSR top plug with aluminum inserts Combination SSR top plug aluminum
Top SSR plug with plastic insert SSR plug set with plastic inserts NR SSR top plug with plastic insert NR SSR top and bottom plug set with plastic inserts High-strength SSR plug set (top and bottom) with 24-tooth NR plastic insert SSR top plug with aluminum inserts SSR plug set with aluminum inserts High-strength SSR top plug with 24-tooth NR plastic inserts Combination NR SSR plugs with plastic inserts Combination SSR plugs with standard aluminum inserts
Standard SSR plugs and NR SSR plugs are available in top or top-and-bottom plug sets for 7- to 20-in. casing sizes. Drillpipe releasing darts are available for use with 4 1/2-, 5-, 5 1/2-, and 6 5/8-in. drillpipe sizes. NR plug sets are also available for many combination casing strings. SSR plug sets are available with aluminum or plastic inserts. Plastic plug sets can be drilled with standard/bi-center PDC or roller-cone bits, while aluminum insert plug sets should be drilled only with roller-cone rock bits. For operating procedures, see the SSR Plug manual (Part No. 809.31099) packaged with every Halliburton SSR plug set or at the following HalWorld website location: <http://halworld.corp.halliburton.com/hes/hesps/ hespszi/hespszice/hespszice_Manl/hespszice_ Manl_CsgSales/hespszice_Manl_CsgSales_CSM .asp>
DN002979
DN002980
DN002981
Cementing Plugs
Assembly Part Nos. 3 1/2 in. (89 mm) 101387430a 101387382a 101387382
b
Casing Weight lb/ft (kg/m) 4.054 Min 4.560 Max 13 to 23 (19 to 34) 17 to 32 (25 to 48) 17 to 32 (25 to 48) 35 to 46 (52 to 68) 20 to 39 (30 to 58) 24 to 49 (36 to 73) 29 to 54 (44 to 80) 32 to 66 (48 to 98) 38 to 71 (56 to 106) 48 to 72 (71 to 107) 65 to 118 (97 to 176)
4 1/2- to 5-in. (114- to 127-mm) Drillpipe 809.32129 101341643a 809.32129 809.32149 (100074526) 101340590a 809.32169 (100074529) 101350582a 809.32179 809.32199 809.32239 (100074540) 809.32259 (100074542)
7 5/8 (194) 8 5/8 (219) 9 5/8 (244) 10 3/4 (273) 11 3/4 (298) 13 3/8 (340) 16 (406) 18 5/8 (473) 20 (508)
a
All Sizes
Note: Assembly includes releasing mechanism, releasing dart, and ball. HWE style cementing plug b 1325 PSI release
4.12-4
April 2005
Cementing Plugs
Table 4.12.2.AOil-Resistant SSR Plastic Insert Plug Set Casing Information Casing OD in. (mm) 9 5/8 (244) 10 3/4 (273) 11 3/4 (298) 13 3/8 (340) 16 (406) 18 5/8 (473) 20 (508) Casing Weight lb/ft (kg/m) 29 to 54 (44 to 80) 32 to 66 (48 to 98) 38 to 71 (56 to 106) 48 to 72 (71 to 107) 65 to 118 (97 to 176) Assembly Part Nos. 4 1/2- to 5-in. (114- to 127-mm) Drillpipe 809.32165 (100074528) 809.32195 809.32215 (100074533) 809.32235 (100074537) 809.32255 (100074541) 5- to 5 1/2-in. (127- to 140-mm) Drillpipe 809.32194 101355521 809.32234 (100074536)
All Sizes
April 2005
DN002975
4.12-5
Cementing Plugs
Note: 24-tooth NR plugs are not compatible with 20-tooth plugs or floating equipment. Do not mix NR plugs with standard plugs and floating equipment. The plugs will not seal properly at the float collar.
Table 4.12.3.AOil-Resistant 24-Tooth SSR NR Top Plug Casing Information Casing OD in. (mm) 7 (178) 7 5/8 (194) 8 5/8 (219) 9 5/8 (244) 10 3/4 (273) 11 3/4 (298) 13 3/8 (340) 16 (406) 18 5/8 (473) 20 (508) Assembly Part Nos. 4 1/2- to 5-in. 5- to 5 1/2-in. Casing Weight (114- to 127-mm) (127- to 140-mm) lb/ft (kg/m) Drillpipe Drillpipe 17 to 32 (25 to 48) 20 to 39 (30 to 58) 24 to 49 (36 to 73) 29 to 54 (44 to 80) 32 to 66 (48 to 98) 38 to 71 (56 to 106) 48 to 72 (71 to 107) 65 to 118 (97 to 176) 809.33139 (100074578) 809.33149 (100009556) 809.33169 (120133630) 809.33179 (101200518) 809.33219 (100074581) 809.33239 (100074583) 809.33259 (100074587) 809.33168 809.33218 (100055402) 809.33238 (100074582) 809.33258 (100074586)
All Sizes
4.12-6
April 2005
Cementing Plugs
Note: 24-tooth NR plugs are not compatible with 20-tooth plugs or floating equipment. Do not mix NR plugs with standard plugs and floating equipment. The plugs will not seal properly at the float collar.
Table 4.12.4.AOil-Resistant 24-Tooth NR SSR Plug Set Casing Information Casing OD in. (mm) 6 5/8 (168) 7 (178) 7 5/8 (194) 8 5/8 (219) 9 5/8 (244) 10 3/4 (273) 11 3/4 (298) 13 3/8 (340) 14 (356) 16 (406) 18 5/8 (473) 20 (508)
a
Casing Weight lb/ft (kg/m) 17 to 32 (25 to 48) 17 to 32 (25 to 48) 35 to 46 (52 to 68) 20 to 39 (30 to 58) 24 to 49 (36 to 73) 29 to 54 (44 to 80) 32 to 66 (48 to 98) 38 to 71 (56 to 106) 48 to 72 (71 to 107) 60 to 94.9 (89.3 to 141.2) 65 to 118 (97 to 176)
809.33165 (100009813) 809.33175 (101002227) 809.35195 a (100074655) 809.33215 (100004666) 809.33235 (100007934) 809.33255 (100074585)
All Sizes
20-tooth nonrotating design. Note: Assembly includes releasing mechanism, releasing dart, and ball.
April 2005
4.12-7
Cementing Plugs
Table 4.12.5.ASSR Aluminum Insert Top Plug Casing Information Assembly Part Nos. 4 1/2- to 5-in. 5- to 5 1/2-in. Casing OD Casing Weight (114- to 127-mm) (127- to 140-mm) in. (mm) lb/ft (kg/m) Drillpipe Drillpipe 6 5/8 (168) 7 (178) 7 5/8 (194) 8 5/8 (219)
DN003065
17 to 32 (25 to 48) 17 to 32 (25 to 48) 35 to 46 (52 to 68) 20 to 39 (30 to 58) 24 to 49 (36 to 73) 29 to 54 (44 to 80) 32 to 66 (48 to 98) 66 to 81 (98 to 121) 38 to 71 (56 to 106) 48 to 72 (71 to 107)
809.34126 809.34136 809.34126 809.34146 809.34156 809.34166 809.34176 809.34186a,b 809.34196 809.34216
809.34197
Assembly can be used for lighter casing weights. For recommendations, contact the Cementing Casing Equipment Department, Duncan, OK. Note: Assembly includes releasing mechanism, releasing dart, and ball.
4.12-8
April 2005
Cementing Plugs
April 2005
DN002976
4.12-9
Cementing Plugs
4.12-10
April 2005
DN002976
Cementing Plugs
Table 4.12.8.AHigh-Strength Oil-Resistant NR SSR Top Plug Casing Information Part No. 5- to 5 1/2-in. 4 1/2- to 5-in. Casing OD Casing Weight Min. ID Max. ID (114- to 127-mm) (127- to 140-mm) in. (mm) lb/ft (kg/m) in. (mm) in. (mm) Drillpipe Drillpipe 9 5/8 29 to 54 8.40 9.06 809.33951 (244) (44 to 80) (213) (230) (120021570) 10 3/4 9 5/8 8.40 10.19 809.33963 (273 244) (213) (259) (120042372) 13 3/8 48 to 72 12.07 12.72 809.33957 (340) (71 to 107) (306) (323) (100074611)
April 2005
DN002971
Important: To pressure-test casing to high pressures, a high-pressure NR float collar must be run in the casing string.
4.12-11
Cementing Plugs
Important: If this plug set is to be used for pressure-testing the casing to elevated pressures, a high-strength float collar must be used. The plug set is available only in 9 5/8-in., 13 3/8-in., and 10 -in. 9 5/8-in. tapered string of casing. All three plug sets are of the nonrotating type to provide easy drillout with PDC bits after pressure testing is complete.
Table 4.12.9.AHigh-Strength Oil-Resistant 24-Tooth NR SSR Plug Set Casing Information Part No. 4 1/2- to 5-in. 5- to 5 1/2-in. Casing OD Casing Weight Min. ID Max. ID (114- to 127-mm) (127- to 140-mm) in. (mm) lb/ft (kg/m) in. (mm) in. (mm) Drillpipe Drillpipe 9 5/8 29 to 54 8.40 9.06 809.33931 100074579 (244) (44 to 80) (213) (230) (100074609) 10 3/4 9 5/8 10.19 809.33962 809.33864 8.40 (273 244) (213) (259) (100074612) (101004161) 13 3/8 48 to 72 12.07 12.72 809.33937 (340) (71 to 107) (306) (323) (100074610)
4.12-12
April 2005
DN002981
Cementing Plugs
April 2005
4.12-13
DN002958
Cementing Plugs
Part No. 4 1/2- to 5-in. (114- to 127-mm) Drillpipe 809.34819 (100074646) 809.34854 (100074653) 809.34853 (100074652) 809.32962 (101214952) 809.32870 (100074574)a 809.32871 (100074575) 5- to 5 1/2-in. (127- to 140-mm) Drillpipe 809.34855 (100074654) 809.34852 (101205664) 809.34856 (101004270) 809.33970a (101005564) 101295840
a
Min. ID Max. ID in. (mm) in. (mm) 5.87 (150) 5.87 (150) 6.45 (164) 5.87 (150) 8.40 (213) 5.87 (150) 5.87 (150) 9.55 (243) 5.87 (150) 12.07 (307) 7.125 (181) 9.06 (230) 9.06 (230) 9.06 (230) 10.19 (259) 10.50 (267) 10.19 (259) 11.15 (283) 11.15 (283) 19.25 (489)
4.12-14
April 2005
DN002943
Cementing Plugs
April 2005
DN002959
4.12-15
Cementing Plugs
Important: After cementing operations are completed, use a roller-cone rock bit to drill out the plug set.
Table 4.12.13.ACombination 24-Tooth NR SSR Plug Set
Casing Information Part No. 5- to 5 1/2-in. (127- to 140-mm) Drillpipe 809.33864 (101004161) b 809.33970 (101005564) b 809.33971 (101005565)
a,b
Casing Casing 4 1/2- to 5-in. Min. ID Max. ID OD OD (114- to 127-mm) in. (mm) in. (mm) in. (mm) in. (mm) Drillpipe 10 3/4 (273) 11 3/4 (298) 13 3/8 (340)
a b c
a,b
4.12-16
April 2005
DN002960
Cementing Plugs
It equalizes pressure above the top plug and the drillpipe. It allows the running tool to be turned during makeup.
Pressure above the top plug should be relieved to help prevent the top plug body from being sheared off by the release mechanism. After the SSR plug assembly is installed into the landing joint, circulation pressure bypasses the wipers on the cementing plugs and is trapped above the top plug. During the release of either the bottom plug or the top plug, circulation is stopped and pressure is allowed to decrease, creating a differential pressure across the top plug body. If the pressure is not relieved, a pressure force acting downward on the top plug is created. This pressure force tries to push the top plug down and can shear the threads off the plug body. The swivel/equalizer assembly allows the pressure to be relieved into the drillpipe and helps equalize the pressure across the top plug. The swivel feature allows the running tool to be turned for makeup purposes.
Note: Type H SSR plug sets with a 3 3/4-in. 6-stub Acme box thread looking up may be attached directly to the standard swivel equalizer by removing the lower connector from the swivel mandrel.
The SSR Swivel/Equalizer Manual (Part No. 101247133) can be found on the HalWorld website at the following link: <http://halworld.corp.halliburton.com/ hes/hesps/hespszi/hespszice/hespszice_ Manl/hespszice_Manl_CsgSales/ hespszice_Manl_CsgSales_CSM.asp> Figure 4.13.B, along with Tables 4.13.A through 4.13.D, provides parts information about the common threads available for SSR swivel/equalizer valves.
Table 4.13.ASSR Swivel/ Equalizer Assembly Part Numbers
Thread 3 1/2 EUE 4 1/2 IF (NC-50) 4 1/2 8rd Box Part No. 809.20170 (100074440) 809.20130 (100074438) 809.20140 (100074439) Assembly OD in. (mm) 4.375 (120.7) 6.000 (152.4) 5.750 (146.1)
DN002955
Note: The shear pins that hold the bottom plug to the bottom plug release mechanism should not be exposed to a shearing action. Two shearing actions are possible: a downward force and a twisting force. Either force will shear the bottom plug shear pins. The twisting force is made when operators turn the upper
April 2005
4.13-1
Cementing Plugs
Table 4.13.BTool Joint Adapter Part Numbers (Item Number 1 in Figure 4.13.B) Tool Joint OD Part No. Thread in. (mm) 6.00 4 1/2 IF 809.03102 (152.4) (NC-50) (100074407) 5.75 809.03111 4 1/2 8rd (146.1) (100074410) Box 5.75 809.03121 4 1/2 8rd (146.1) (100074411) Pin
1
Qty. Req. 1 2 1 1 1 1 2 2 1 1 1 1 2 1
Description Tool Joint Adapter O-ring (90-D 5 3/8 x 5 x 3/16 in.) Equalizer Case O-ring (90-D 5 x4 5/8 x 3/16 in.) Equalizer Valve Bearing Housing O-ring (90-D 4 1/4 x 3 7/8 x 3/16 in.) Ball Thrust Bearing SSR Swivel Mandrel Lower Connector O-ring (90-D 3 7/8 x 3 1/2 x 3/16 in.) O-ring (90-D 3.525 x 2.975 x 0.275 in.) Pipe plug (1/8 in.) O-ring (90-D 4 1/8 x 3 7/8 x 1/8 in.) 3 3/4-in. 6-Stub Acme Thread 4-in. 6-Stub Acme Thread
Part No.
2
See Table 4.13.B 70.34103 (100026864) 809.20031 (100074423) 70.33795 (100001913) 809.03103 (100074408) 809.20032 (100074424) 70.33936 (100001936) 809.20033 (100074425) 809.20034 (100074426) 809.20045 (10074429) 70.33983 (100001970) 70.33508 (100026707) 70.36970 (100002103) 70.33459 (100026696)
10 11 9 7 A 8 7 6 4 5 3
13
Repair kit 100074437 contains enough of these items to repair one assembly.
Table 4.13.DSSR Swivel/Equalizer Replacement Parts for 4.375-in. OD 2.55-in. ID (809.20170 Only)
Item No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 A B Qty. Req. 1 2 1 1 1 1 2 114 1 1 1 1 2 1 Description Tool Joint Adapter O-ring (90-D 3 3/4 x 3 1/2 x 1/8 in.) Equalizer Case O-ring (90-D 3 1/2 x 3 1/8 x 3/16 in.) Equalizer Valve Bearing Housing O-ring (90-D 3 1/2 x 3 1/4 x 1/8 in.) Ball Bearing (0.187 diameter) SSR Swivel Mandrel Lower Connector O-ring (90-D 3 1/4 x 3 x 1/8 in.) O-ring (90-D 3.525 x 2.975 x 0.275 in.) Pipe plug (1/4 in.) O-ring (90-D 4 1/8 x 3 7/8 x 1/8 in.) 3 1/8-in. 6-Stub Acme Thread 4-in. 6-Stub Acme Thread Part No. 809.20051 (100074432) 70.34035 (100012952) 809.20052 (100074433) 70.33980 (100001967) 809.03133 (100074412) 809.20053 (100074434) 70.34033 (100002007) 993.90128 (100082907) 809.20054 (100074435) 809.20055 (100074436) 70.34031 (100002005) 70.33508 (100026707) 70.44843 (100028835) 70.33459 (100026696)
17 14
4.13-2
April 2005
DN002954
Cementing Plugs
4 1/2 to 5 809.31110 100074509 4.75 3.5 4.0 18.15 2.06 2.125 1.855 4.38 2.25 12.11/1.19 8.93/0.38 35.83/1.24
5 to 5 1/2 809.31115 100074513 5.5 3.5 5.0 18.56 2.06 2.125 1.855 5.12 2.50 12.11/1.19 8.93/0.38 40.10/1.39
6 5/8 809.31130 100074515 6.25 (wipers 1 and 3) 5.25 19.35 2.06 2.125 1.855 5.88 2.75 12.11/1.19 8.93/0.38 62.96/2.18
May 2004
DN002963
4.14-1
Cementing Plugs
4.14.2 SSR Plug System Releasing Dart Dimensional Information for Reduced ID Restriction
The plug developed for pumping through smaller drillpipe IDs than the standard drillpipe releasing dart is shown in Figure 4.14.2.A. As noted in Table 4.14.2.A, this drillpipe plug will pass through a 2.125-in. ID in 4 -, 5-, and 5 -in. drillpipe.
Table 4.14.2.ASSR Plug System Releasing Dart Dimensional Information for Reduced ID Restrictions Drillpipe Size (in.) IMS Part No. SAP Part No. Cup OD for Wipers 1 and 2 (in.) Length (in.) Shoulder OD (in.) Latch OD (in.) Nose OD (in.) Maximum Drillpipe ID (in.) Minimum Drillpipe ID (in.) Aluminum Volume (in. )/Weight (lb) Plastic Volume (in. )/Weight (lb) Rubber Volume (in. )/Weight (lb)
3 3 3
4 1/2 to 5 809.20380 101201150 4.75 18.15 2.06 2.125 1.855 4.38 2.125 12.11/1.19 8.93/0.38 26.72/0.93
5 to 5 1/2 809.20385 101201173 5.50 18.56 2.06 2.125 1.855 5.12 2.125 12.11/1.19 8.93/0.38 28.92/1.0
4.14-2
DN002962
May 2004
Cementing Plugs
Table 4.14.3.ASSR Plug System Releasing Ball for Releasing Bottom SSR Plug Only SSR Size in. (mm) 7 to 20 (178 to 508) Ball Material 3.4-Sp.Gr. Plastic Ball OD in. (mm) 1 3/4 (44) Part No. 70.00337 (100020470)
Pressures listed here are differential pressures. Gauge pressures might be greater or smaller than listed pressures, depending on wellbore hydraulics
May 2004
DN002966
4.14-3
Cementing Plugs
Notes
4.14-4
May 2004