Professional Documents
Culture Documents
012 - PSURGE4010 Combination Wave Surge Generator
012 - PSURGE4010 Combination Wave Surge Generator
012 - PSURGE4010 Combination Wave Surge Generator
FEATURES BENEFITS
Combination wave Totally reproducible test results
Voltage: 1,2/50us Consistent pulse parameters
Current: 8/20us Fully automatic execution of
Impulse voltage: 200V ... 4.2kV complex test routines and
Impulse current: 100A ... 2,1kA sequences
Maximum impulse repetition rate 12 Cost effective solution
per minute Expandable to 3 phase testing
Positive, negative and user definable with FP-SURGE 32.1
alternating polarity Expandable to impulse magnetic
Integrated CDN for 16A at 264Vac and field testing (IEC 61000-4-9) with
110Vdc MSURGE
Impulse voltage, current and EUT
current measurement
Test parameter ramp functions
Phase angle synchronization
18 test and 18 program memory
locations
Remote control using WinFEAT&R©
CONTROL
CONTROL QUALITY EFFICIENT
ENHANCING TESTING
The internal microprocessor, High flexibility and
and intelligent user interface The PSURGE 4010 operation of tests is
making use of main function generator is fully compliant achieved through:
hard-keys, makes this to the IEC requirements. Fully automatic test
device very user friendly. A solid state high voltage sequences
The following points further switch provides very EUT failure detection
increase user flexibility : accurate reproducible tests, and protection by
Programmable and long life expectancy and programmable current
variable parameters accurate phase limits
make PSURGE 4010 synchronisation. Product EUT failure detection
ideal for development quality is enhanced by: with integrated “EUT
and quality engineers. An integrated current Failed” input
Permanent storage of protected coupling- connector
tests and programs decoupling network Centronix interface for
Alphanumeric input decoupling inductors that printer
Multi-mode LCD display maintain the impulse A serial RS-232
Test report generated waveform interface enable
directly to a printer Integrated high operation from a
without using an performance peak computer
external computer measurements of Expansion into an
Easy remote control impulse voltage and automatic 3-phase
programming with an current system
external computer and Safety circuit and Possibility to fulfil IEC
WinFEAT&R software emergency stop circuit 61000-4-9 with an
provide high personnel optional coil antenna
protection
TECHNICAL SPECIFICATION
SPECIFICATION
Waveshape 1,2/50us and 8/20us
according to IEC 61000-4-5 Internal single-phase CDN
Impulse Voltage 200V ... 4,2kV • max. AC power 264V / 16A, 50-60Hz
on Schuko plug
Impulse Current 100A ... 2,1kA • max. DC power 110V / 16A
Impulse Repetition Up to 12 per minute • Coupling mode 18uF and 9uF+10Ω
acc. to IEC 61000-4-5
Impulse Polarity Positive, Negative, Alternating Size 19" / 3 units
Power supply 85V ... 264V, 50/60Hz Weight 18 kg
ORDERING INFORMATION
PSURGE 4010 249600
MSURGE coil antenna 249559
Stand for coil antenna 249003
FP-SURGE 32.1 3-phase CDN 249944
WinFEAT&R software 249970
Haefely has a policy of continuous product improvement. Therefore we reserve the right to change design and specification without notice. PSURGE4010_2009-01-07.doc