Professional Documents
Culture Documents
GDE060BA-T V2.1 Specification
GDE060BA-T V2.1 Specification
PL
IS
D
D
O
O
6 inch
G
GDE060BA-T
Dalian Good Display Co., Ltd.
GDE060BA-T
Product Specifications
AY
PL
IS
Customer Standard
D
Description 6” E-PAPER DISPLAY WITH TOUCH PANEL
Revision 2.1
O
O
Design Engineering
Email: info@good-display.com
Website: www.e-paper-display.com
Contents
AY
2 Features ....................................................................................... 5
3 Application .................................................................................... 5
PL
4 Pin Assignment. ............................................................................. 6
12 Packaging .................................................................................... 17
O
G
AY
PL
IS
D
D
O
O
G
1 General Description
GDE060BA-T is an Active Matrix Electrophoretic Display(AM EPD) with capacitive touch panel,
High-Resolution AM TFT Black/White display module which can be used in portable electronic
AY
devices, such as E-book Reader.
The module is a TFT-array driving electrophoretic display, with integrated circuits including
source and gate drivers. The resolution of the module is 600×800(SVGA),and the active area
PL
is 6 inch diagonal.
2 Features
600×800 display
IS
White Reflectance above 35%(0 minute)
D
Contrast Ratio above 8:1(2 minute)
Reflective mode
Bi-stable display
O
3 Application
E-book reader
4 Pin Assignment
AY
4 NC NO Connection
5 NC NO Connection
6 VDD Digital power supply drivers
7 VSS Ground
8 CLK Clock source driver
PL
9 VSS Ground
10 LE Latch enable source driver
11 OE Output enable source driver
12 SPH Start pulse source driver
13
14
15
D0
D1
D2
IS
Data signal source driver
Data signal source driver
Data signal source driver
16 D3 Data signal source driver
17 D4 Data signal source driver
D
18 D5 Data signal source driver
19 D6 Data signal source driver
20 D7 Data signal source driver
21 VCOM Common connection
22 NC NO Connection
D
23 NC NO Connection
24 NC NO Connection
25 NC NO Connection
O
26 VSS Ground
27 NC NO Connection
28 CPV Shift clock input
O
32 VSS Ground
33 VPOS Positive power supply source driver
34 VGH Positive power supply gate driver
5 Electrical Characteristics
5.1 Module Interface Description
This module can be driven by ASIC AVT6201A Timing Controller(T-Con).
AY
VDD 3.0 3.3 3.6 V
Logic Voltage supply
IVDD VDD=3.3V - 3.0 - mA
VGH 21 22 23 V
Gate Positive supply
PL
IVGH - 0.35 - mA
IPOS
IS
VPOS=15V
14.6
-
15
20
15.4
-
V
mA
VNEG -15.4 -15 -14.6 V
Source Negative supply
D
INEG VNEG=-15V - -20 - mA
Operating temperature 0 50 ℃
Storage temperature -20 - 70 ℃
Maximum image
O
960 1200 ms
update time at 25℃
Notes:
1. The maximum power and maximum current are specified for the worst case power
consumption.
2. The typical power is measured when “typical images” are displayed.
3. The standby power is the consumed power when the module controller is in standby
mode.
4. The listed electrical/optical characteristics are only guaranteed under the controller &
waveform provided by GoodDisplay
.
AY
Clock CPV high time tCPVh 0.5 - - us CPV
PL
STV
Data hold time tH 300 - - ns
th
8
8
-
-
-
-
ns
ns
D
LE on delay time tLEdly 40 - - ns
Below
table
LE high-level pulse width tLEw 40 - - ns
CLK
AY
tclk
D0~D7, SPH
PL
tsu th
IS
Output Latch/Control Signals
D
CLK
SPH
tLEdly tLEoff
D
LE
tLEw
O
SHR
O
tMsu tMh
tCPVl
G
CPV
tCPVh
tSU tH
STV
To prevent the device from damage due to latch up, the power on/off sequence shown below
must be followed. When power on: VDD -> VGL -> VNEG/VGH/VPOS -> Vcom
AY
When power off: Vcom -> VNEG/VGH/VPOS -> VGL -> VDD
VGH
PL
VPOS
IS
VDD
VSS
D
Vcom
D
VNEG
O
VGL
O
7 Mechanical Specifications
7.1 Dimension
AY
Vertical 122.4 mm
Pixel Pitch
PL
Horizontal 0.151 mm
Vertical 0.153 mm
Overall Dimensions
Width
Height
IS 101.8 mm
mm
138.4
Thickness 1.7 mm
D
Mass of the Module 41 g
横向10:1
O 前视图 1: 1 侧视图 后视图 1: 1
E E
101. 80±0. 15包PD) l.475土。15(']']>咽『的
99. 40±0. 15(PS) 也 3 ITO Fii.ii自带'AG艇
O
m
N-
.
97.60土0. 15(TP OD) 2.10土0.2
O
.175 OCA2
。
NDU制
dH啊
www.e-paper-display.com
91. 80土0. 15(TP AA) 5. 00±0.2
咽口
qdv
d
90.60土0. 15 (A. A) 5.60土0.2
。咱-d
口-4T
D
D D
(
2.
e
的 N
SN
内陆’HU
-
.
(臼由 )的 -
O
口
O
24『 mO -H响
SEιCNdH响
村 04甲
HEdv
什$ .
-Z
N
。面-
。?”
B
N
刊
D
·∞的H
NH
NH
辄
n
12/17
··
.
n
主
也
”
c c
N
.
IS
时D
E二1 〔二3
-U响
NDU制
。
。.
。.
S JH
」
NH
dH啊dv hF
υ韭哑R
B B
Technical Parameters:
1. Structure:F+F
PL
2. Channels:16*22 IC:FT5436 TP Pin define 大连佳显电子有限公司
3. Power Supply: 2.8V-3.6V 1 GND DALIAN GOOD DISPLAY CO., LTD
4. Transmittance: ≥83% 2 VDD DRAWN BY: PRODUCT MODEL:
5. Surface hardness: ≥2H 3 RST 绘 图: 产品型号: GDE060BA-T VIEW:
6. Working Temp&Humidity: 0℃~+50℃ 4 INT CHECKED BY: CUSTOMER ID:
客户确认签字: 投影方式: 第三角投影法
审 核: 客户编号:
A 7. Storage Temp&Humidity: -20℃~+70℃,40%RH~70%RH 5 SDA
APPROVED BY: DATE: UNITS
8. Tolerances unless otherwise specification±0.2mm 6 SCL 2017-08-18 mm
批 准: 日 期: 单 位:
AY
7 NC Standard tolerance: WEBSITE: SCALE
8 NC 公 差: www.e-paper-display.com 比 例: 1:1
网 址:
GDE060BA-T
2 3 4
一
6 7 8
8. Optical Characteristics
Values
Parameter Conditions Units Notes
Min. Typ. Max
AY
White Reflectivity 0 minute 35 - - %
PL
GC16(T=0℃) - 1500 1600
Notes:
1. CR=Surface Reflectance with all white pixel/Surface Reflectance with all black pixels
D
O
O
G
Warning
The display glass may break when it is dropped or bumped on a hard surface. Handle
with care. Should the display break, do not touch the electrophoretic material. In case
AY
of contact with electrophoretic material, wash with water and soap.
Caution
The display module should not be exposed to harmful gases, such as acid and alkali
PL
gases, which corrode electronic components.
Disassembling the display module can cause permanent damage and invalidates the
warranty agreements.
IS
Observe general precautions that are common to handling delicate electronic components.
The glass can break and front surfaces can easily be damaged. Moreover the display is
sensitive to static electricality and other rough environmental conditions.
D
Precautions
(1) Do not apply pressure to the EPD panel in order to prevent damaging it.
(2) Do not connect or disconnect the interface connector while the EPD panel is in
operation.
D
(3) Do not touch IC bonding area. It may scratch TFT lead or damage IC function.
(4) Please be mindful of moisture to avoid its penetration into the EPD panel, which
O
stores the ESL / EPD Tag with a completely white image to avoid this issue
(6) High temperature, high humidity, sunlight or fluorescent light may degrade the
EPD panel’s performance. Please do not expose the unprotected EPD panel
to high temperature, high humidity, sunlight, or fluorescent for long periods of
time.
AY
High- At the end of the test, electrical,
T = +50°C, RH = 30% for IEC 60 mechanical, and optical
1 Temperature
168 hrs 068-2-2Bp specifications shall be satisfied.
Operation
PL
High- At the end of the test, electrical,
T = +70°C, RH= 23% IEC 60 mechanical, and optical
3 Temperature
168 for hrs 068-2-2Bp specifications shall be satisfied.
Storage
4
Low-
Temperature
Storage
T = -25°C for 168 hrs
IS IEC 60
068-2-1Ab
At the end of the test, electrical,
mechanical, and optical
specifications shall be satisfied.
High- At the end of the test, electrical,
Temperature, T = +40°C, RH = 90% IEC 60 mechanical, and optical
5
D
High-Humidity for 168 hrs 068-2-3CA specifications shall be satisfied.
Operation
High
At the end of the test, electrical,
Temperature, T = +60℃, RH=80% IEC 60 mechanical, and optical
6
High- Humidity for 168 hrs 068-2-3CA specifications shall be satisfied.
Storage
At the end of the test, electrical,
D
1 cycle:[-25℃ IEC 60
7 Thermal Shock 30min]→[+70 ℃ 30 min] : mechanical, and optical
068-2-14 specifications shall be satisfied.
50cycles
1.04G, Frequency:10~500Hz
O
Panel
AY
PL
Driver
IS
34PIN Input
D
D
O
O
G
12. Packaging
AY
PL
IS
D
D
O
O
G