Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 1

1.

If a 115-Vrms, 60 Hz input voltage was connected to a half-wave doubler circuit, what would be the peak output
voltage and ripple frequency?

2. If a 115-Vrms, 60 Hz input voltage was connected to a full-wave doubler circuit, what would be the peak output
voltage and ripple frequency?

3. What is the output ripple (RMS) of a halfwave rectifier circuit if the input voltage maximum is 100 volts?

4. What is the output DC of a fullwave rectifier circuit if the input voltage maximum is 100 volts?

5. What is the peak load voltage in a full wave rectifier if the secondary voltage is 20 V rms?

6. A reverse voltage of 20V is across a diode. What is the voltage across the depletion layer?

7. Two diodes are in series. Thte first diode has a voltage of 0.75 V and the second has a vltage of 0.8 V. If the current
through the first diode is 500 mA, what is the current through the second diode?

8. If line frequency is 60 Hz, the output frequency of a half wave rectifier is?

9. If line frequency is 60 Hz, the output frequency of a bridge rectifier is?

10. Determine the diode current at 20 degree C for a silicon diode with Is = 50nA and an applied voltge of 0.6V.

1. If a 115-Vrms, 60 Hz input voltage was connected to a half-wave doubler circuit, what would be the peak output
voltage and ripple frequency?

2. If a 115-Vrms, 60 Hz input voltage was connected to a full-wave doubler circuit, what would be the peak output
voltage and ripple frequency?

3. What is the output ripple (RMS) of a halfwave rectifier circuit if the input voltage maximum is 100 volts?

4. What is the output DC of a fullwave rectifier circuit if the input voltage maximum is 100 volts?

5. What is the peak load voltage in a full wave rectifier if the secondary voltage is 20 V rms?

6. A reverse voltage of 20V is across a diode. What is the voltage across the depletion layer?

7. Two diodes are in series. Thte first diode has a voltage of 0.75 V and the second has a vltage of 0.8 V. If the current
through the first diode is 500 mA, what is the current through the second diode?

8. If line frequency is 60 Hz, the output frequency of a half wave rectifier is?

9. If line frequency is 60 Hz, the output frequency of a bridge rectifier is?

10. Determine the diode current at 20 degree C for a silicon diode with Is = 50nA and an applied voltge of 0.6V.

You might also like