Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

Provision equipment list

to Muzaffargarh Training Center for Engineers


and
to Guddu Training Center for Technicians

Jul. 2021
1. Nondestructive testing Kit for Engineers and Technicians (1/2)
1

(1) For general training


 DVD ”Introduction to Nondestructive Testing”  Original textbook
 Weld defect test pieces for general lecture

(2) For penetrant testing (PT) training


 Weld defect test pieces for PT  Chemical spray  Disposable Wipes
(cleaner/penetrant/developer)

 Gas mask with filter

Equipment image for illustration purposes only. Actual equipment may vary.

The Kansai Electric Power Co., Inc.


1. Nondestructive testing Kit for Engineers and Technicians (2/2)
2

(3) For magnetic particle testing (MT) training


 Defect test pieces for MT  Fluorescent Magnetic particle

 Handy black light for MT  Magnetic yoke  Non-fluorescent Magnetic particle

(4) For Ultrasonic testing (UT) training [thickness]


 Calibration Block for UT  Contact media for UT  Ultrasonic Material Thickness Gauge

The Kansai Electric Power Co., Inc.


2.Advance preparation for installation of the Nondestructive testing Kit 3

You should secure the installation site which meet the following measures for setting mount.
 Enough capacity ventilator (fan) especially in the small classroom

 Dark room with opaque curtain for observing MT

 Example classroom layout Trainee

Trainee
Trainee
desk

desk

desk
Lecturer

Trainee

Trainee

Trainee
desk

desk

desk

The Kansai Electric Power Co., Inc.


3. Rotor dynamics simulator kit (only for Engineers) 4

The Kansai Electric Power Co., Inc.


4.Advance preparation for installation of the Rotor dynamics simulator kit 5

You should secure the installation site which meet the following measures for setting mount.
 Two workbenches
 Natural frequency of installation site: over 300 Hz to avoid resonance.
 The surface of the installation site should be flat.
 Levelness of installation site: Horizontal
 Environmental condition: Temperature: 5 to 32℃ / Humidity:35~85%(RH) [stable]
Rotor dynamics
PC Printer
simulator

Workbench
Stable floor
(prohibit for “free access floor”)

 Example classroom layout


Trainee

Trainee

Trainee
PC

desk

desk

desk
dynamics
simulator
Rotor

Trainee

Trainee

Trainee
desk

desk

desk

The Kansai Electric Power Co., Inc.

You might also like