Professional Documents
Culture Documents
LKPD 2 Part 2
LKPD 2 Part 2
GROUP WORK
Identify the Procedure text below and complete the following table !
How to make a plastic bag from the former:
450 ml plastic packaging with pattern and color that made similar (2
pieces to side front and rear, 2 more to the left and right side).
50 cm width 3 cm size bisban for rope bag.
1 m bisban to the size of the width of 2 cm.
Adhesive 4 cm
30 cm cotton lace as a sweetener.
The needle (size 16) and sewing thread is coloured.
Clean the stain plastic packaging with tissue paper, otherwise it could
soak it with warm water.
Scissors two fruit packing with the desired size. Try the second piece
of plastic packaging having the same size.
Scissors two other packages (for left and right side) into two parts the
width (7cm). Bisban sewing on the side the width of each packaging
that was cut.
Attach the sewing and adhesive, using a sewing machine, on the
inside of each side of the front and back.
Attach the 3 cm width sewing and bisban on the surface of the plastic
(front and back side), as the rope bag.
Then attach the sewing cotton lace and simultaneously bisban on the
top sheet of plastic packaging. Do this step on plastic packaging for
the front and back side.
Connect the two plastic packaging already cut size is 7cm (to the left
and right sides of the bag). Forming of sheet length.
Connect and connect with the stitching machine, part last (No. 7) and
plastic sheets to the front and back side.
Then plug the bisban on all edges. Well Be a pretty dainty bag, made
from plastic packaging. The same way you can do for a bag that is
larger, lho. Stay locker size only.
TITLE/GOAL MATERIAL NEEDED STEPS/HOW TO MAKE IT