Professional Documents
Culture Documents
4.swro Wave
4.swro Wave
5
Example: Design a SWRO system to produce 10 m3/day at standard conditions
6
Example: Design a SWRO system to produce 10 m3/day at standard conditions
7
Example: Design a SWRO system to produce 10 m3/day at standard conditions
The Silt Density Index (SDI) value of the pretreated feed water correlates fairly well with the amount
of fouling material present. 8
Example: Design a SWRO system to produce 10 m3/day at standard conditions
Is that Ok?
9
Example: Design a SWRO system to produce 10 m3/day at standard conditions
10
Example: Design a SWRO system to produce 10 m3/day at standard conditions
Critical !!
11
Example: Design a SWRO system to produce 10 m3/day at standard conditions
• Terminology
• Define key parameters influencing quality/quantity of produced water
• Review past lecture
• Being Mindful – Initial cost vs Running Cost
• Optimise your solution
• What are the key parameters in the results?
• Are you happy with results ? – Not sure
• Remember the Iteration stage in the design spiral?
• Did you decide that it is perfect for your customer needs?
• Select components - Refer to past lecture what does an RO consists
of? 12
Example: Design a SWRO system to produce 10 m3/day at standard conditions
13
15
Why SWRO system not Thermal Water Generators!
17