Professional Documents
Culture Documents
Using Notice
Using Notice
Using Notice
,LTD
NO.260HONGSONG ROAD,HIGH-TECH ZONE ,ZHENGZHOU CITY,CHINA
1.Prepare proper voltage stabilizer in advance. Make sure no other machine connected to this
stabilizer.
3.Before installation, please read the manual book and videos carefully. Avoid installing
4.If you don’t have experience with this printer, we suggest you find a professional engineer to
5.Before you install or remove any parts of the machine, pls turn off the machine first. This is
very important.
6.During installation, be careful, there are some protection fixed equipment during delivery.
Make sure all are removed before printing, especially the device in head carriage area.
7.Don’t touch the metal mirror side of head when install print head.
8.Be careful when insert head cables and ink dampers. Make sure the insertion is right and
9.Ink damper color sequence on printer should be same with color sequence in software.
10.When installation and using, ink or other liquids can’t touch head cables or the area around
11.After installation, pour ink into ink tank. Make sure the ink is no more than half the ink tank
capacity.
12.When pumping ink, make sure the ink tube is full of ink, and ink continuously flow out from
15.After cleaning head, please do nozzle test, and check whether the testing strip is
complete and right color. If the testing strip is not complete, please clean head again, and check
18.The distance between head and material is 2mm-3mm. Common flex banner, sav materials,
no need to adjust.
19.If your material is too thick, please adjust the head height in advance.
20.Large Format Printer needs to keep printing every day. Regular print jobs can keep print
head in good condition and extend the lifespan of the print head.
21.If no printing jobs, you can print a nozzle test every day to check the head condition. If
testing is ok, then turn off the printer. If testing not OK, then clean nozzle, and nozzle test, till it
is OK.
22.Make sure head carriage back to the original position first, then turn off printer rightly.
23.The pet film of the powder shaker should be placed in a dry place, once it is damp, it
cannot be used. It cannot be used even if it is heated and dried, and the layer will rise
later.
24.The ink must be shaken evenly before use to avoid sediment blocking the print head.