Professional Documents
Culture Documents
Re 120
Re 120
Re 120
Contents
6.1 Preparing the pressure washer for operation. . . . . . . . 15 15.1 Cleaning the pressure washer and accessories . . . . 27
7 Assembling the pressure washer . . . . . . . . . . . . . . . . . . . 15 15.2 Cleaning the nozzle and spray lance . . . . . . . . . . . . . . . 28
0458-620-0121-A. VA1.E18.
7.1 Assembling the pressure washer . . . . . . . . . . . . . . . . . . . 15 15.3 Cleaning the water intake screen. . . . . . . . . . . . . . . . . . . 28
7.2 Pulling out and pushing in the handle . . . . . . . . . . . . . . . 16 15.4 Cleaning the water filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
0000007923_007_GB
{ This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process
with electronic systems.
0458-620-0121-A 1
English 1 Introduction
17 Repairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 1 Introduction
17.1 Repairing the pressure washer . . . . . . . . . . . . . . . . . . . . . 29
18 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Dear Customer,
18.1 Correcting faults in the pressure washer . . . . . . . . . . . 30
18.2 Greasing the gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Thank you for choosing STIHL. We develop and
manufacture our quality products to meet our customers’
19 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .. .. .. .. .. . . . 32 requirements. The products are designed for reliability even
19.1 Pressure washer STIHL RE 110. . . . . . . .. .. .. .. .. . . . 32 under extreme conditions.
19.2 Pressure washer STIHL RE 120. . . . . . . .. .. .. .. .. . . . 33
STIHL also stands for premium service quality. Our
19.3 Extension Cords . . . . . . . . . . . . . . . . . . . . . . .. .. .. .. .. . . . 34
specialist dealers guarantee competent advice and
19.4 Sound and vibration levels RE 110 . . . . .. .. .. .. .. . . . 35 instruction as well as comprehensive service support.
19.5 Sound and vibration levels RE 120 . . . . .. .. .. .. .. . . . 35
19.6 REACH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. .. .. .. .. . . . 35 We thank you for your confidence in us and hope you will
enjoy working with your STIHL product.
20 Spare Parts and Accessories . . . . . . . . . . . . . . . . . . . . . . . 35
20.1 Spare Parts and Accessories. . . . . . . . . . . . . . . . . . . . . . . 35
21 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
21.1 Disposing of the pressure washer . . . . . . . . . . . . . . . . . . 36
22 EC Declaration of Conformity. . . . . . . . . . . . . . . . . . . . . . . 36
22.1 Pressure washer STIHL RE 110, 120 . . . . . . . . . . . . . . 36 Dr. Nikolas Stihl
2 0458-620-0121-A
3 Overview English
WARNING
This notice refers to risks which can result in serious or fatal
injury. 9
8 10
► Serious or fatal injuries can be avoided by taking the
precautions mentioned. 7
6 11
NOTICE
5
This notice refers to risks which can result in damage to 4
property. 3 12
► Damage to property can be avoided by taking the 10
precautions mentioned. 2
13
1 14
2.3 Symbols in Text
This symbol refers to a chapter in this instruction
manual.
18
15
17
16
0000-GXX-4338-A0
0458-620-0121-A 3
English 3 Overview
0000-GXX-4339-A0
The retainer is used for storing the spray attachment.
12
11 Rotary switch 10
The rotary switch is used to switch the pressure washer 15 8
on and off.
12 Connector 1 Latch
The connector is used for connecting the high-pressure The latch holds the nozzle in the spray lance.
hose. 2 Spray lance
13 Connector The spray lance connects the spray gun with the nozzle.
The connector is used for connecting the water hose.
4 0458-620-0121-A
4 Safety Precautions English
8 Coupling
The coupling connects the high-pressure hose with the Guaranteed sound power level in accordance
high-pressure pump. LWA with Directive 2000/14/EC in dB(A) so that noise
9 Connector levels of different products can be compared.
The connector connects the high-pressure hose with the These symbols denote original STIHL spare
spray gun. parts and original STIHL accessories.
10 Cleaning pin
The cleaning pin is provided to clean the nozzles.
11 Spraying set 4 Safety Precautions
The spraying set is used for cleaning with detergents.
12 Bottle
The bottle contains the detergent.
4.1 Warning symbols
The warning symbols on the pressure washer have the
13 Adjusting ring (only RE 120) following meanings:
The adjusting ring doses the detergent.
Observe the safety advice and associated
14 Spray nozzle measures.
The spray nozzle mixes the detergent with the water.
15 Rotary nozzle
The rotary nozzle creates a hard, rotating water jet. Read the Instruction Manual, make sure you
have understood it and keep it in a safe place for
16 Fan-jet nozzle reference.
The fan-jet nozzle creates a flat water jet.
0458-620-0121-A 5
English 4 Safety Precautions
Wear safety glasses. The pressure washer must not be used in the rain.
WARNING
■ Using the pressure washer other than for its intended use
can result in serious injuries or death and damage to
Do not direct the water jet at people or animals.
property.
► Always use the pressure washer as described in this
Instruction Manual.
Do not direct the water jet at electrical The pressure washer STIHL RE 110 or RE 120 is not
equipment, electrical connections, sockets or designed to be used for:
live power cords. – Cleaning asbestos cement and similar surfaces
– Cleaning surfaces painted or varnished with paints
Do not direct the water jet at electrical containing lead
appliances or at the pressure washer. – Cleaning surfaces which come into contact with
foodstuffs.
– Cleaning the pressure washer itself
If the connecting cord or extension cord is
damaged: Unplug the mains plug from the
socket. 4.3 Requirements concerning the user
6 0458-620-0121-A
4 Safety Precautions English
► Make sure that the user fulfills the following ■ Wearing unsuitable footwear can cause the user to slip
requirements: and fall. The user may be injured.
– The user is rested. ► Wear sturdy, enclosed footwear with non-slip soles.
0458-620-0121-A 7
English 4 Safety Precautions
– The high-pressure hose, the couplings and the spray ► Do not insert objects into the openings in the pressure
attachment are undamaged. washer.
– The high-pressure hose, the couplings and the spray ► If in any doubt: Contact a STIHL servicing dealer.
attachment are correctly attached.
– The connecting cord, the extension cord and their plugs 4.7 Operation
are undamaged.
– The pressure washer is clean and dry. WARNING
■ In certain situations the user may no longer be able to
– The spray attachment is clean.
concentrate on the job. The user may trip, fall and be
– The controls work and they have not been modified. seriously injured.
– Only an original STIHL accessory for this pressure washer ► Keep calm and plan your work.
is fitted. ► In poor light conditions and poor visibility: Do not
– The accessory is correctly fitted. operate the pressure washer.
► Use the pressure washer on your own.
WARNING ► Watch out for obstacles.
■ Parts that are not in a safe condition cannot function ► Stand safely on the ground when operating the pressure
properly and safety devices can be disabled. People can washer and keep your balance. If you have to work at a
be seriously injured or killed. height: use a lift bucket or secure scaffolding.
► Never use a damaged pressure washer. ► If you experience signs of fatigue: Take a break.
► Never use a damaged high-pressure hose, couplings or
■ If the pressure washer starts behaving differently or in an
spray attachment.
unusual way while operating, the pressure washer may be
► Attach the high-pressure hose, couplings and spray in an unsafe condition. This can result in serious injuries
attachment as described in this Instruction Manual. and damage to property.
► Never use a damaged connecting cord, extension cord ► Stop working, unplug the mains plug from the socket
or mains plug. and consult a STIHL servicing dealer.
► If the pressure washer is dirty or wet: clean the pressure ► The pressure washer must always be operated in an
washer and allow it to dry. upright position.
► If the spray attachment is dirty: Clean the spray ► To ensure an adequate exchange of cooling air, do not
attachment. cover the pressure washer.
► Do not modify the pressure washer. ■ When the spray gun trigger is released, the high-pressure
pump switches off automatically and water stops flowing
► If the controls do not work: Do not operate the pressure out of the nozzle. The pressure washer is then in stand-by
washer. mode and is still switched on. If the spray gun trigger is
► Only fit original STIHL accessories for this pressure
washer.
► Fit the accessories as described in this Instruction
Manual or in the Instruction Manual for the accessory.
8 0458-620-0121-A
4 Safety Precautions English
squeezed, the high-pressure pump switches on again ■ The water jet may detach asbestos fibers from surfaces.
automatically and water flows out of the nozzle. This can Asbestos fibers may spread through the air after drying
result in serious injuries and damage to property. and be breathed in. Breathing in asbestos fibers can be
► When not operating the machine: Lock the spray gun harmful to health.
trigger. ► Do not clean surfaces containing asbestos.
► Switch off pressure washer. ■ The water jet may remove oil from vehicles or machinery.
The oily water may enter the soil, the water system or the
drains. That would create an environmental hazard.
► Vehicles or machinery should only be cleaned at places
► Unplug the mains plug of the pressure washer from the where there is an oil trap in the water drain.
socket.
■ In combination with leaded paint the water jet can form
■ At temperatures below 0° C water can freeze on the leaded aerosols and leaded water. Leaded aerosols and
surface to be cleaned and in the components of the leaded water may enter the soil, the water system or the
pressure washer. The user may slip, fall and be seriously drains. Breathing in aerosols can be harmful to health and
injured. Property may be damaged. trigger allergic reactions. That would create an
► Do not use the pressure washer at temperatures below environmental hazard.
0° C. ► Do not clean surfaces that are painted or lacquered with
■ Pulling on the high-pressure hose, water hose or leaded paint.
connecting cord can cause the pressure washer to move ■ The water jet can damage sensitive surfaces. Property
and topple over. Property may be damaged. may be damaged.
► Do not pull on the high-pressure hose, water hose or ► Do not clean sensitive surfaces with the rotary nozzle.
connecting cord.
► Sensitive surfaces made of rubber, fabric, wood and
■ If the pressure washer is placed on a sloping, uneven or similar materials should be cleaned at a lower operating
soft surface it may move and topple over. Property may be pressure and from a greater distance.
damaged.
■ If while in use the rotary nozzle is immersed in dirty water
► Place the pressure washer on a horizontal, flat, hard
and then operated, the rotary nozzle may be damaged.
surface.
► Do not use the rotary nozzle with dirty water.
■ If working at a height, the pressure washer or the spray
attachment may fall to the ground. This can result in ► If cleaning a container: Empty the container and allow
serious injuries and damage to property. the water to flow away while cleaning it.
► Use a lift bucket or secure scaffolding.
► Do not place the pressure washer in a lift bucket or on
scaffolding.
► If the high-pressure hose does not have sufficient
reach: Extend the high-pressure hose by connecting a
high-pressure hose extension.
► Secure the spray attachment so that it cannot fall.
0458-620-0121-A 9
English 4 Safety Precautions
■ Drawing in flammable and explosive liquids can cause ► Do not direct the water jet at electrical
fires and explosions. This can result in serious injuries or appliances or at the pressure washer.
death and damage to property.
► Do not draw in or spray flammable or explosive liquids.
■ Drawing in irritant, corrosive and toxic liquids can ► Keep electrical appliances and the pressure washer
endanger health and damage components of the pressure away from the surface to be cleaned.
washer. This can result in serious injuries or death and
damage to property. ■ An incorrectly routed high-pressure hose may suffer
damage. As a result of the damage, water under high
► Do not draw in or spray irritant, corrosive or toxic liquids.
pressure may escape uncontrolled into the surrounding
■ The strong water jet can seriously injure people and area. This can result in serious injuries and damage to
animals and cause damage to property. property.
► Do not direct the water jet at people or ► Do not direct the water jet at the high-pressure hose.
animals. ► Route the high-pressure hose so that it is not under
tension or tangled.
► Route the high-pressure hose so that it will not be
► Do not direct the water jet at places that are not fully damaged, kinked or crushed, or chafed.
visible.
► Protect the high-pressure hose from heat, oil and
► Do not use the water jet to clean clothing while wearing chemicals.
it.
■ An incorrectly routed water hose may suffer damage and
► Do not use the water jet to clean shoes or boots while people may trip over it. People may be injured and the
wearing them. water hose may be damaged.
■ If electrical equipment, electrical connections, sockets ► Do not direct the water jet at the water hose.
and live power cords come into contact with water, electric ► Route and mark the water hose so that people will not
shock may result. This can result in serious injuries or trip over it.
death and damage to property.
► Route the water hose so that it is not under tension or
► Do not direct the water jet at electrical tangled.
equipment, electrical connections, sockets
or live power cords. ► Route the water hose so that it will not be damaged,
kinked or crushed, or chafed.
► Protect the water hose from heat, oil and chemicals.
► Do not direct the water jet at the connecting cord or
extension cord. ■ The strong water jet produces reactive forces. The
reactive forces occurring may cause the user to lose
■ If electrical appliances or the pressure washer come into
control of the spray attachment. The user may be
contact with water, electric shock may result. The user
seriously injured and property may be damaged.
may be seriously injured or killed and property may be
damaged. ► Hold the spray gun firmly with both hands.
► Always use the pressure washer as described in this
Instruction Manual.
10 0458-620-0121-A
4 Safety Precautions English
► If in any doubt: Contact a STIHL servicing dealer. – The socket is not properly installed.
0458-620-0121-A 11
English 4 Safety Precautions
■ A damaged or unsuitable extension cord can result in ► Lay the connecting cord and extension cord on a dry
electric shock. People can be seriously injured or killed. surface.
► Use an extension cord with the correct cross-section, ■ The extension cord warms up in operation. If that heat
@ 19.3. cannot escape, it may cause a fire.
► Only use an extension cord which is splash-proof and ► If using a cable reel: Completely unroll the cable reel.
approved for outdoor use.
► Use an extension cord that has the same characteristics 4.11 Transport
as the connecting cord of the pressure washer, @ 19.3
WARNING
WARNING ■ The pressure washer may topple over or move during
transport. This can result in injuries and damage to
■ During operation, an incorrect mains voltage or incorrect
property.
mains frequency may result in an overvoltage in the
pressure washer. The pressure washer may be damaged. ► Lock the spray gun trigger.
► Make sure that the mains voltage and the mains ► Switch off pressure washer.
frequency of the power supply match the data on the
rating plate of the pressure washer.
■ Electrical components may be overloaded during ► Unplug the mains plug of the pressure washer from the
operation if more than one electric power tool is connected socket.
to a multiple socket. The electrical components may heat
up and a fire may break out. This can result in serious ► Drain the spraying set or secure it so that it
injuries or death and damage to property. cannot topple over and cannot move.
► Only ever connect one pressure washer to one socket.
► Do not connect pressure washers to multiple sockets. ► Secure the pressure washer with lashing straps, belts or
■ An incorrectly routed connecting cord or extension cord a net so that it cannot topple over and cannot move.
may be damaged and people may trip over it. People may ■ At temperatures below 0° C water can freeze in the
be injured and the connecting cord or extension cord may components of the pressure washer. The pressure washer
be damaged. may be damaged.
► Route the connecting cord and extension cord so that ► Drain high-pressure hose and spray attachment.
the water jet cannot touch them.
► If the pressure washer cannot be protected
► Route and mark the connecting cord and extension cord from frost in transport: Protect the pressure
so that people will not trip over them. washer with glycol-based antifreeze.
► Route the connecting cord and extension cord so that
they are not under tension or tangled.
► Route the connecting cord and extension cord so that
they will not be damaged, kinked or crushed and will not
be chafed.
► Protect the connecting cord and extension cord from
heat, oil and chemicals.
12 0458-620-0121-A
4 Safety Precautions English
0458-620-0121-A 13
English 5 Safety instructions - Accessories
■
0000-GXX-5101-A0
Spray lance extension
WARNING
■ The spray lance extension intensifies the reactive forces. ► Push the pipe cleaning hose into the pipe up to the
The reactive forces occurring may cause the user to lose mark (1) before switching on the pressure washer and
control of the spray attachment. The user may be squeezing the spray gun trigger.
seriously injured and property may be damaged.
► When the mark on the pipe cleaning hose comes into
► Attach only one spray lance extension.
view as it is pulled out:
► Hold the spray gun firmly with both hands.
– Release spray gun trigger
► Always use the equipment as described in this
– Switch off pressure washer
Instruction Manual.
– Turn off water supply
Surface cleaner – Actuate the spray gun: The water pressure will be
reduced
WARNING – Lock the spray gun trigger
■ The water jet may injure the user.
► Do not reach underneath the surface ■ In a big pipe, the pipe cleaning hose may change direction
cleaner. inside the pipe and come back out of the pipe opening.
The user may lose control of the pipe cleaning hose. The
user may be seriously injured and property may be
damaged.
► Hold and guide the surface cleaner as described in the
► Keep an eye on the pipe.
surface cleaner Instruction Manual.
► If the nozzle of the pipe cleaning hose comes out of the
Pipe cleaning kit pipe:
– Release spray gun trigger
WARNING – Lock the spray gun trigger
■ The pipe cleaning hose intensifies the reactive forces. If
the spray gun trigger is squeezed when the pipe cleaning – Switch off pressure washer
hose is not in the pipe, the pipe cleaning hose may thrash
around in an uncontrolled manner. The user may lose
control of the pipe cleaning hose. The user may be
seriously injured and property may be damaged.
14 0458-620-0121-A
6 Preparing the pressure washer for operation English
0000-GXX-4341-A0
2
6.1 Preparing the pressure washer for operation 4
The following steps must be carried out every time before
starting work: ► Push handle (1) onto the telescopic shafts (2).
► Make sure that the pressure washer, the high-pressure ► Push threaded sleeves (3) through the handle (1) into the
hose, the hose coupling and the connecting cord are in a telescopic shafts (2).
safe condition, @ 4.6. ► Insert screws (4) into the threaded sleeves (3) and tighten
► Clean the pressure washer, @ 15. up.
► If using a water filter and the water filter is dirty: Clean the
water filter, @ 15.4. Attaching the hose bracket
► Place the pressure washer on a stable, flat surface so that
it cannot slip or topple over.
► Connect the high-pressure hose, @ 7.3.
2
► Attach the spray gun, @ 7.4.
► Attach the spray lance, @ 7.5. 1
► Attach the nozzle, @ 7.6.
► If using a detergent: Using detergents, @ 11.4.
0000-GXX-4342-A0
► If using an accessory: Fit accessory, @ 5.1.
► Connect the pressure washer to a water source, @ 8.
3
► Connect the pressure washer to the power supply, @ 9.1.
► If it is not possible to carry out these steps: Do not use the ► Push hose bracket (1) into the handle (2).
pressure washer. Consult a STIHL servicing dealer. ► Insert screws (3) into the handle (2) and tighten up.
0458-620-0121-A 15
English 7 Assembling the pressure washer
Attaching the spraying set 7.2 Pulling out and pushing in the handle
7.2.1 Pulling out the handle
0000-GXX-4611-A0
1 2
0000-GXX-4619-A0
1
► Insert spraying set (1).
Inserting the nozzles and cleaning pin ► Press the safety catch (1) and pull out the handle (2).
► Release safety catch (1) and pull out handle (2) until it
audibly engages.
1
2
4
0000-GXX-5086-A0
2
3
0000-GXX-4620-A0
► Open the flap (1).
► Insert fan-jet nozzle (2) and rotary nozzle (3). 1
► Insert cleaning pin (4).
► Press the safety catch (1) and push in the handle (2).
► Release safety catch (1) and push in handle (2) until it
audibly engages.
16 0458-620-0121-A
7 Assembling the pressure washer English
7.3 Fitting and removing the high-pressure hose 7.4 Attaching and removing the spray gun
7.3.1 Connecting the high-pressure hose 7.4.1 Attaching the spray gun
RE 110
2
2
0000-GXX-4346-A0
0000-GXX-4348-A0
1
► Push coupling (1) onto the connector (2).
The coupling (1) audibly engages.
► If the coupling (1) cannot be pushed easily onto the ► Push connector (1) into spray gun (2).
connector: Grease the gasket on the connector (2) with The connector (1) audibly engages.
grease for fittings. ► If the connector (1) cannot be pushed easily into the spray
gun (2): Grease the gasket on the connector (1) with
7.3.2 Removing the high-pressure hose grease for fittings.
RE 120
2
0000-GXX-4347-A0
0000-GXX-5095-A0
► Pull off coupling (1). 1
► Push connector (1) into spray gun (2).
The connector (1) audibly engages.
► If the connector (1) cannot be pushed easily into the spray
gun (2): Grease the gasket on the connector (1) with
grease for fittings.
0458-620-0121-A 17
English 7 Assembling the pressure washer
7.4.2 Removing the spray gun 7.5 Attaching and removing the spray lance
RE 110 7.5.1 Attaching the spray lance
2
1
2
0000-GXX-4350-A0
0000-GXX-4349-A0
1
► Press and hold the locking lever (1). ► Push spray lance (1) into spray gun (2).
► Pull out connector (2). ► Twist the spray lance (1) until it engages.
► If the spray lance (1) cannot be pushed easily into the
RE 120 spray gun (2): Grease the gasket on the spray lance (1)
with grease for fittings.
2 1
1
0000-GXX-5096-A0
0000-GXX-4351-A0
► Press and hold the locking lever (1).
► Pull out connector (2).
► Squeeze spray lance (1) and spray gun (2) together and
twist as far as they will go.
► Pull spray lance (1) and spray gun (2) apart.
18 0458-620-0121-A
8 Connecting to a water source English
0000-GXX-4352-A0
with the pressure washer.
3 2
0000-GXX-4629-A0
7.6.2 Removing the nozzle
4
5
1 ► Unscrew connector (1) from water tap (2).
2 ► Screw water filter (3) onto water tap (2) and tighten hand-
tight.
► Screw connector (1) onto water filter (3) and tighten hand-
tight.
0000-GXX-4353-A0
0458-620-0121-A 19
English 8 Connecting to a water source
8.2 Connecting the pressure washer to the mains Disconnecting the water hose
water supply
Connecting the water hose 2
The water hose must meet the following requirements:
1
– The water hose has a diameter of 1/2".
– The water hose is between 10 m and 25 m long.
0000-GXX-5087-A0
► Connect water hose to a tap.
► Turn tap fully on and flush water hose with water.
Sand and dirt will be flushed out of the water hose. The
water hose will be vented.
► Turn off tap.
► Turn off tap.
► To unlock the coupling: Pull the ring (1) or twist and hold it.
► Pull the coupling off the connector (2)
2
8.3 Connecting the pressure washer to another
1 water source
The pressure washer can draw water from water butts and
0000-GXX-4354-A0
cisterns and from running or stagnant bodies of water.
0000-GXX-5093-A0
spray lance
► Squeeze spray gun trigger until an even water jet is
delivered from the spray gun.
► Release spray gun trigger. So that the water can be drawn in, the height difference
► Lock the spray gun trigger. between the pressure washer and the water source should
► Attach the nozzle. not exceed the maximum suction lift (a), @ 19.
The appropriate STIHL suction set must be used. The
suction set includes a water hose with a special coupling.
Depending on the market, the appropriate STIHL suction set
may be supplied with the pressure washer.
20 0458-620-0121-A
9 Connecting the pressure washer to the power supply English
Connecting the water filter ► Suspend the suction cup (4) in the water source so that
the suction cup (4) does not touch the bottom.
If operating the pressure washer with sandy water from
water butts, cisterns or running or stagnant bodies of water, ► If the spray gun is attached to the high-pressure hose:
a water filter must be connected in-line between the water remove the spray gun.
hose and the pressure washer. ► Hold the high-pressure hose downward.
Depending on the market, the water filter may be supplied ► Switch on pressure washer and run it until an even jet of
with the pressure washer. water is delivered by the high-pressure hose.
► Switch off pressure washer.
► Attach spray gun to the high-pressure hose.
► Squeeze and hold down spray gun trigger.
► Switch on pressure washer.
3
2
9 Connecting the pressure washer to the
power supply
0000-GXX-5090-A0
1 9.1 Connecting the pressure washer to the power
supply
► Unscrew connector (1).
► Screw water filter (2) onto connector (3) and tighten hand-
tight. 2
Connecting the water hose
1
3
4
0000-GXX-4371-A0
1
3
► Turn rotary switch (1) to the 0 position.
0000-GXX-5089-A0
0458-620-0121-A 21
English 10 Switching the pressure washer on and off
0000-GXX-4366-A0
0000-GXX-4358-A0
4
22 0458-620-0121-A
11 Operating the pressure washer English
0000-GXX-4360-A0
► Slide retaining latch (1) to the position.
► Press and hold the trigger (2).
The high-pressure pump starts up automatically and water
flows out of the nozzle.
► Hold the spray gun by the handle with one hand, wrapping 2
your thumb around the handle.
0000-GXX-4612-A0
► Hold the spray lance firmly with your other hand, wrapping
your thumb around the spray lance.
► Point the nozzle at the ground.
► Release trigger (2).
The high-pressure pump switches off automatically and
water stops flowing out of the nozzle. The pressure
washer is still switched on.
► Slide retaining latch (1) to the position.
0458-620-0121-A 23
English 11 Operating the pressure washer
11.3 Cleaning ► Adjust the fan-jet nozzle so that the surface to be cleaned
According to the application, the following nozzles can be is not damaged.
used:
– Fan-jet nozzle: The fan-jet nozzle is designed for cleaning
large areas.
– Rotary nozzle: The rotary nozzle is designed for removing
stubborn dirt.
0000-GXX-5094-A0
stubborn dirt.
The user can work at a distance when cleaning any of the
following surfaces:
– Painted surfaces
► Move the spray attachment evenly along the surface to be
– Wooden surfaces cleaned.
– Rubber surfaces ► Move forward slowly in a controlled manner.
RE 110
0000-GXX-4628-A0
0000-GXX-4345-A0
working pressure.
Turning the fan-jet nozzle in the – direction reduces the
working pressure.
► Before starting work, direct the water jet at an
► Meter out and use the detergent as described in the
inconspicuous area of the surface and check that the
detergent Instruction Manual.
surface does not suffer damage.
► Fill bottle (1) with max. 500 ml of detergent.
► Select the distance between the nozzle and the surface to
be cleaned so that the surface to be cleaned is not ► Screw spray nozzle (2) onto the bottle (1) and tighten
damaged. hand-tight.
24 0458-620-0121-A
12 After Finishing Work English
► Screw spray nozzle (2) onto the bottle (1) and tighten
hand-tight.
3
500 ml
3
5
400 ml
0000-GXX-5097-A0
300 ml 500 ml
200 ml 400 ml
0000-GXX-4363-A0
100 ml 300 ml
200 ml
nozzle.
► Attach the spraying set (4) to the spray lance (3). ► If a nozzle is fitted to the spray lance (3): Remove the
► Soak extremely dirty surfaces with water before cleaning nozzle.
them. ► Attach the spraying set (4) to the spray lance (3).
► Squeeze spray gun trigger and spray detergent onto the ► Turn adjusting ring (5) to set the required metered
surface to be cleaned. quantity of detergent.
► Apply the detergent starting at the bottom and working up ► Turn the adjusting ring in the + direction: Detergent
and do not allow to dry. addition is increased.
► Remove spraying set. ► Turn the adjusting ring in the - direction: Detergent
addition is reduced.
► Attach the nozzle.
► Soak extremely dirty surfaces with water before cleaning
► Clean the surface. them.
RE 120 ► Squeeze spray gun trigger and spray detergent onto the
surface to be cleaned.
► Apply the detergent starting at the bottom and working up
2 and do not allow to dry.
► Remove spraying set.
► Attach the nozzle.
► Clean the surface.
0000-GXX-5098-A0
1
12 After Finishing Work
0458-620-0121-A 25
English 12 After Finishing Work
0000-GXX-4367-A0
► Detach high-pressure hose and allow remaining water to
run out of the high-pressure hose.
► Detach nozzle and spray lance and clean them.
► Detach spray gun and allow remaining water to run out of
► Roll up the high-pressure hose (6) and hang it on the hose
the spray gun.
bracket (7).
► Clean the pressure washer.
1
3
2
8
8 8
0000-GXX-4364-A0
0000-GXX-4631-A0
4
5 8 8
► Store the spray attachment in the retainers (8) on the
► Swivel bracket (1) upward. pressure washer.
► Wind up connecting cord (2) onto bracket (1).
► Secure connecting cord (2) with clip (3).
12.2 Protecting the pressure washer with antifreeze
► Insert fan-jet nozzle (4) or rotary nozzle (5). If the pressure washer cannot be protected from frost during
transport or storage, the pressure washer should be
protected by a glycol-based antifreeze. The antifreeze
prevents water inside the pressure washer from freezing and
causing damage to the pressure washer.
► Remove spray lance
► Connect the shortest possible water hose to the pressure
washer.
The shorter the water hose, the less antifreeze is needed.
► Mix the antifreeze as described in the antifreeze
Instruction Manual.
26 0458-620-0121-A
13 Transporting English
► Pour antifreeze into a clean container. ► If carrying the pressure washer: Carry the pressure
► Insert water hose into container of antifreeze. washer by the handle (1) and carrying handle (2).
► Squeeze and hold spray gun trigger. ► If transporting the pressure washer in a vehicle, ensure
that the following conditions are fulfilled:
► Switch on pressure washer.
– The pressure washer is standing upright or lying on its
► Hold down spray gun trigger until an even jet of antifreeze back.
is delivered from the spray gun and point the spray gun
into the container. – The pressure washer is secured with lashing straps,
belts or a net and cannot topple over or move.
► Press and release spray gun trigger several times.
– If the pressure washer cannot be protected from frost in
► Switch off pressure washer and unplug mains plug from transport: Protect the pressure washer with antifreeze.
the socket.
► Detach spray gun, high-pressure hose and water hose
and allow antifreeze to run into the container. 14 Storing
► Store and dispose of antifreeze in accordance with the
applicable regulations and in an environmentally
responsible manner. 14.1 Storing the pressure washer
► Switch off pressure washer and unplug mains plug from
the socket.
13 Transporting ► The pressure washer should be stored in such a way that
the following conditions are fulfilled:
– The pressure washer is out of the reach of children.
13.1 Transporting the pressure washer
– The pressure washer is clean and dry.
► Switch off pressure washer and unplug mains plug from
the socket. – The pressure washer is in an enclosed room.
► Empty the detergent bottle or secure it so that it cannot – The pressure washer is in a temperature range above
topple over or fall and cannot move. 0 °C.
– If the pressure washer cannot be protected from frost in
storage: Protect the pressure washer with antifreeze.
1 2 15 Cleaning
0458-620-0121-A 27
English 15 Cleaning
15.2 Cleaning the nozzle and spray lance 15.3 Cleaning the water intake screen
0000-GXX-4369-A0
0000-GXX-4372-A0
2
► Flush nozzle and spray lance under running water and dry ► Unscrew connector (1) of water connection.
with a cloth. ► Pull water intake screen (2) out of water connection.
► Flush water intake screen (2) under running water.
► Insert water intake screen (2) into water connection.
► Screw on connector (1) and tighten it by hand.
1 1
2 3
4
► If the nozzle is blocked up: Clean the nozzle with the
cleaning pin. 5
0000-GXX-4373-A0
► Remove gasket (1) from the fastener (2).
► Unscrew fastener (2) from filter housing (5).
► Remove gasket (3) from the fastener (2).
► Remove filter (4) from the filter housing (5).
► Rinse gaskets (1 and 3), fastener (2) and filter (4) under
running water.
28 0458-620-0121-A
16 Maintenance English
16 Maintenance
Monthly
► Clean water intake screen.
17 Repairing
0458-620-0121-A 29
English 18 Troubleshooting
18 Troubleshooting
30 0458-620-0121-A
18 Troubleshooting English
0458-620-0121-A 31
English 19 Specifications
Version 120 V / 60 Hz
– Fuse (characteristic "C" or "K"): 15 A
0000-GXX-4617-A0
– Power consumption: 1.4 kW
1 1 – Electrical protection class: I
– Degree of electrical protection: IPX5 (protection from
► Grease gaskets (1) with grease for fittings. water jets in any direction)
– Working pressure (p): 8.4 MPa (84 bar)
19 Specifications – Max. permissible pressure (p max.): 10 MPa (100 bar)
– Max. water supply pressure (p in max.): 1 MPa (10 bar)
19.1 Pressure washer STIHL RE 110 – Max. water throughput (Q min): 7.3 l/min (440 l/h)
– Max. suction lift: 0.5 m
Version 230 V, 50 Hz
– Max. water temperature in pressure mode (t in max):
– Fuse (characteristic "C" or "K"): 10 A 40 °C
– Power consumption: 1.7 kW – Max. water temperature in suction mode: 20 °C
– Electrical protection class: I – Dimensions
– Degree of electrical protection: IPX5 (protection from – Length: 419 mm
water jets in any direction) – Width: 352 mm
– Working pressure (p): 11 MPa (110 bar) – Height in operating position: 900 mm
– Max. permissible pressure (p max.): 12 MPa (120 bar) – Height in transport position: 625 mm
– Length of high-pressure hose: 7 m
– Max. water supply pressure (p in max.): 1 MPa (10 bar)
– Weight (m) with accessory attached: 17.6 kg
– Max. water throughput (Q min): 7.3 l/min (440 l/h)
– Max. suction lift: 1 m Version 127 V / 60 Hz
– Max. water temperature in pressure mode (t in max): – Fuse (characteristic "C" or "K"): 15 A
40 °C
– Power consumption: 1.4 kW
– Max. water temperature in suction mode: 20 °C
– Electrical protection class: I
– Dimensions
– Degree of electrical protection: IPX5 (protection from
– Length: 419 mm water jets in any direction)
32 0458-620-0121-A
19 Specifications English
– Working pressure (p): 8.4 MPa (84 bar) – Height in operating position: 900 mm
– Max. permissible pressure (p max.): 10 MPa (100 bar) – Height in transport position: 625 mm
– Length of high-pressure hose: 7 m
– Max. water supply pressure (p in max.): 1 MPa (10 bar)
– Weight (m) with accessory attached: 17.6 kg
– Max. water throughput (Q min): 7.3 l/min (440 l/h)
– Max. suction lift: 0.5 m Version 240 V, 50 Hz
– Max. water temperature in pressure mode (t in max): – Fuse (characteristic "C" or "K"): 10 A
40 °C
– Power consumption: 1.7 kW
– Max. water temperature in suction mode: 20 °C
– Electrical protection class: I
– Dimensions
– Degree of electrical protection: IPX5 (protection from
– Length: 419 mm water jets in any direction)
– Width: 352 mm – Working pressure (p): 11 MPa (110 bar)
– Height in operating position: 900 mm
– Max. permissible pressure (p max.): 12 MPa (120 bar)
– Height in transport position: 625 mm
– Length of high-pressure hose: 7 m – Max. water supply pressure (p in max.): 1 MPa (10 bar)
– Weight (m) with accessory attached: 17.6 kg – Max. water throughput (Q min): 7.3 l/min (440 l/h)
– Max. suction lift: 1 m
Version 220 V / 60 Hz
– Max. water temperature in pressure mode (t in max):
– Fuse (characteristic "C" or "K"): 10 A 40 °C
– Power consumption: 1.7 kW – Max. water temperature in suction mode: 20 °C
– Electrical protection class: I – Dimensions
– Degree of electrical protection: IPX5 (protection from – Length: 419 mm
water jets in any direction) – Width: 352 mm
– Working pressure (p): 10 MPa (100 bar) – Height in operating position: 900 mm
– Max. permissible pressure (p max.): 12 MPa (120 bar) – Height in transport position: 625 mm
– Length of high-pressure hose: 7 m
– Max. water supply pressure (p in max.): 1 MPa (10 bar)
– Weight (m) with accessory attached: 17.6 kg
– Max. water throughput (Q min): 8.5 l/min (510 l/h)
– Max. suction lift: 1 m
19.2 Pressure washer STIHL RE 120
– Max. water temperature in pressure mode (t in max):
40 °C Version 230 V / 50 Hz
– Max. water temperature in suction mode: 20 °C – Fuse (characteristic "C" or "K"): 10 A
– Dimensions – Power consumption: 2.1 kW
– Length: 419 mm – Electrical protection class: I
– Width: 352 mm
0458-620-0121-A 33
English 19 Specifications
– Weight (m) with accessory attached: 20 kg – Max. water throughput (Q min): 8.3 l/min (500 l/h)
– Max. suction lift: 1 m
Version 240 V / 50 Hz
– Max. water temperature in pressure mode (t in max):
– Fuse (characteristic "C" or "K"): 10 A 40 °C
– Power consumption: 2.1 kW – Max. water temperature in suction mode: 20 °C
– Electrical protection class: I – Dimensions
– Degree of electrical protection: IPX5 (protection from – Length: 419 mm
water jets in any direction) – Width: 371 mm
– Working pressure (p): 12.5 MPa (125 bar) – Height in operating position: 925 mm
– Max. permissible pressure (p max.): 14 MPa (140 bar) – Height in transport position: 650 mm
– Length of high-pressure hose: 8 m
– Max. water supply pressure (p in max.): 1 MPa (10 bar)
– Weight (m) with accessory attached: 20 kg
– Max. water throughput (Q min): 8.3 l/min (500 l/h)
– Max. suction lift: 1 m
19.3 Extension Cords
– Max. water temperature in pressure mode (t in max): If an extension cord is used, the cross sectional area of its
40 °C conductors must meet the following minimum requirements
– Max. water temperature in suction mode: 20 °C – depending on the line voltage and length of the extension
cord:
– Dimensions
34 0458-620-0121-A
20 Spare Parts and Accessories English
19.4 Sound and vibration levels RE 110 – Sound power level LwA measured according to
The K value for the sound pressure level is 2 dB(A). The EN 60335-2-79:
K value for the sound power level is 2 dB(A). The K value for – 230 V / 50 Hz version: 81 dB(A)
the vibration levels is 2 m/s². – 240 V / 50 Hz Version: 81 dB(A)
– Sound pressure level L pA measured according to
EN 60335-2-79: – Vibration level ah measured according to EN 60335-2-79,
spray gun: ≤ 3.8 m/s².
– 230 V / 50 Hz version: 67 dB(A)
– 127 V / 60 Hz version: 67 dB(A) Information regarding compliance with the Employers’
– 220 V / 60 Hz version: 67 dB(A) Directive on Vibration 2002/44/EC can be found at
– 240 V / 50 Hz version: 67 dB(A) www.stihl.com/vib.
0458-620-0121-A 35
English 21 Disposal
Original STIHL replacement parts and original STIHL The measured and guaranteed sound power level has been
accessories are available from STIHL servicing dealers. determined in accordance with Directive 2000/14/EC,
Annex V, and standard ISO 3744.
RE 110
21 Disposal
– Measured sound power level: 81 dB(A)
– Guaranteed sound power level: 83 dB(A)
21.1 Disposing of the pressure washer
Information concerning disposal is available from any STIHL RE 120
servicing dealer. – Measured sound power level: 81 dB(A)
► Dispose of the pressure washer, high-pressure hose, – Guaranteed sound power level: 83 dB(A)
nozzles, accessories and packaging in accordance with
the applicable regulations and in an environmentally
The Technical Documentation has been retained by the
responsible manner.
Produktzulassung Department of
ANDREAS STIHL AG & Co. KG.
22 EC Declaration of Conformity The year of construction, the country of manufacture and the
machine number are shown on the pressure washer.
Waiblingen, 15 January 2018
22.1 Pressure washer STIHL RE 110, 120 ANDREAS STIHL AG & Co. KG
ANDREAS STIHL AG & Co. KG
Badstraße 115 pp
D-71336 Waiblingen
Germany
declare under our sole responsibility that
– Type: Pressure washer Thomas Elsner, Head of Product Management and Services
– Make: STIHL
– Model: RE 110, RE 120
– Serial identification number: 4950
36 0458-620-0121-A
0458-620-0121-A
englisch
G
www.stihl.com
*04586200121A*
0458-620-0121-A