Professional Documents
Culture Documents
Smart Home Security System
Smart Home Security System
Literature Review
List of Authors:
Md. Ashikur Rahman (1911725643)
Hardware Requirements
Arduino Uno R3 :
Arduino Has a microcontroller board based on ATmega328P
(datasheet). ARDUINO UNO is the brain of SDN and is
responsible for transmitting all the signals from the code fed into
it and also collects feedback from the ultrasonic sensor to
process the values. Arduino Uno is a microcontroller board
based on the ATmega328P. It has 14 digital input/output pins
(of which 6 can be used as PWM outputs), 6 analog inputs, a 16
MHz quartz crystal, a USB connection, a power jack, an ICSP
header and a reset button. It also processes the signal exchange
between the Bluetooth receiver and the android application.
Laser Module Red KY-008 650nm:
A red diode laser is a solid-state electronics component that
produces an intense beam of visible light with wavelengths of
630 to 700 nanometers (nm) in the red portion of the visible
spectrum. Light is generated by passing current across
semiconducting material, which releases photons .
Buzzer Module:
Active Buzzer Arduino module produces a single-tone sound
when signal is high. To produce different tones, use the Passive
Buzzer module. The Active Buzzer module consists of a
piezoelectric buzzer with a built-in oscillator. It generates a
sound of approximately 2.5 kHz when signal is high.
start
Repeat
check if there’re NO
anyone trying to cross the system
YES
Notification
Take Action
END
Project Idea + Simulation:
Our project is an integrated project between two different
projects found from internet.
Details:
List of components and Net costing:
Components Price
Arduino Uno R3 1070 Tk
Laser receiving sensor module 120 Tk
4x4 matrix keypad 90 Tk
16x2 LCD l2C module 350 Tk
Topway
5V Laser Module (Red) 50 Tk
SYB mini breadboard(2x50) 60 Tk
Servo Motor 90
Solinoid electric door lock 490 Tk
Esp 32 cam module 980 Tk
Total 3300 Tk
Research Papers:
https://iopscience.iop.org/article/10.1088/1757-899X/
263/4/042026/pdf