Professional Documents
Culture Documents
CSE 205 Final Exam-Question
CSE 205 Final Exam-Question
CSE 205 Final Exam-Question
Instruction:
* During the exam, students are allowing to write their answers in word file (Answer sheet) provided by EIU.
After the exam, students convert the word file (Answer sheet) into a PDF file. The PDF file should have name
in the following format “Ngày thi_Mã MH_Mã số SV_Họ và tên SV.pdf”.
* PDF file should have screenshot of network design, screenshot or written code of each network and device
configuration (like router, switch, etc.) and screenshot of the output of every instruction.
* Source code file should have name “Student_Name_Roll_Number.ext” where ext is the extension of
corresponding program language (.pkt). After the exam, students create a .zip file which contains source code
files of the final solutions and the PDF file (Answer sheet). The .zip file should have name in the following
format “Ngày thi_Mã MH_Mã số SV_Họ và tên SV.zip”. In 10 minutes after the exam, students upload the
file in Moodle.
Page 1 of 4
Page 2 of 4
Addressing Table
Device Interface IP Address Model / Services Hosting
Router 0 FastEthernet0/0 192.168.110.1/24 Model: 2811, Configure EIGRP routing protocol
FastEthernet0/1 192.168.80.2/24 for all the interfaces.
Router 1 FastEthernet0/0 192.168.100.1/24 Model: 2811, Configure EIGRP routing protocol
FastEthernet0/1 192.168.90.2/24 for all the interfaces.
Router 2 GigabitEthernet0/0 192.168.80.1/24 Model: 2911, Configure EIGRP routing protocol
GigabitEthernet0/1 192.168.40.2/24 for all the interfaces.
GigabitEthernet0/2 192.168.50.1/24
Router 3 GigabitEthernet0/0 192.168.40.1/24 Model: 2911, Configure EIGRP routing protocol
GigabitEthernet0/1 192.168.10.2/24 on Gig0/0. Configure OSPF routing protocol on
GigabitEthernet0/2 192.168.20.1/24 Gig0/1 (Area 0) & Gig0/2 (Area 0).
Router 4 GigabitEthernet0/0 192.168.50.2/24 Model: 2911, Configure EIGRP routing protocol
GigabitEthernet0/1 192.168.90.1/24 for all the interfaces.
GigabitEthernet0/2 192.168.60.1/24
Router 5 GigabitEthernet0/0 192.168.10.1/24 Model: 2911, Configure OSPF routing protocol on
GigabitEthernet0/1 192.168.1.1/24 Gig0/0 (for Area 0) and Gig0/1 (for Area 10).
Router 6 GigabitEthernet0/0 192.168.60.2/24 Model: 2911, Configure EIGRP routing protocol
GigabitEthernet0/1 192.168.70.1/24 on Gig0/0 and RIP routing protocol on Gig0/1.
Switch0 FastEthernet0/1 Model: 2950-24
Switch1 FastEthernet0/1 Model: 2950-24
Switch2 FastEthernet0/1 Model: 2960-24TT
Switch3 FastEthernet0/1 Model: 2960-24TT
PC0 FastEthernet0/3 DHCP, first 10 IP addresses are static IP address in the network.
Email id: user1@gmail.com, Password: 1123
PC1 FastEthernet0/3 DHCP, first 10 IP addresses are static IP address in the network.
Email id: user2@yahoomail.com, Password: 2123
Tablet PC0 Wireless It is the 3rd host of the network 192.168.20.0/24.
Email id: user3@gmail.com, Password: 3123
Laptop0 FastEthernet0/3 It is the 5th host of the network 192.168.110.0/24.
Email id: user4@yahoomail.com, Password: 4123
Smartphone0 Wireless It is the 5th host of the network 192.168.100.0/24
Printer Wireless It is the 10th host of the network 192.168.110.0/24
Server0 FastEthernet0/2 192.168.1.2/24 DHCP, gmail.com (Email), cit.com (HTTP)
Page 3 of 4
Server1 FastEthernet0/2 192.168.70.2/24 DHCP, DNS, yahoomail.com (Email), eiu.com
(HTTP)
Access Point0 FastEthernet0/2 SSID: SE, WEP Key: 0123456789
Wireless Router0 Internet 1 192.168.20.2/24 SSID: CNDC, WEP Key: 9876543210
IP Phone0 FastEthernet0/3 Phone Number: 99001
IP Phone1 FastEthernet0/2 Phone Number: 88001
Execute following instructions on CISCO packet tracer and take a screen shot of the output:
- - - - - End - - - - -
Page 4 of 4