W080 a sujet aes UES
rottno:{ | [ [1] LT]
B.TECH
(SEM- V) THEORY EXAMINATION 2021-22
HEAT AND MASS TRANSFER
Hours Total Marks
1. Attempt all Sections. If require any missing data; then choose suitably.
SECTION A
1.___Attempt aif questions in brief. 2x10=20
[Qi Casson Marks [CO
a.__| What is the difference between thermodynamics and heat transfer? oneal
b.__| How the thermal conductivity of material is defined? What are its units? |2 | L
c.___| What is meant by transient heat conduction? aenaea
&__| Explain effectiveness and efficiency of fin. zeae
e. ‘What is turbulent flow? Define it. 2 7
£ | Define Reynolds's number, also write the significance of Reynolds's [2 [3
___| number.
| Define Stefan Boltzmann's law. Dest 4.
h, | Explain black body, opaque body, white body and grey body also. 2 [4
i. ___| How heat exchangers are classified? anaes |s
i ‘What are the various modes of mass transfer? 2__15
secTIONsC)
2, Attempt any three of the following
Qre. Questo 7°
‘a.__| Drive an expression for heat cor igh a composite wall.
b. Tt is required to heat oil to abqay 340°C for frying purpose. A ladle is
used in the frying. The seci6} Mf the handle is 5 mm x 18 mm.
surroundings are at 30°C&¢ne conductivity of the material i
‘Wim°C. If the aoa a distance of 380 mm from the
not reach 40°C, Determine the convective heat transfer coeffic
‘e. _ | Differentiate between: “Ov 10 [3
(i) Natural and forced convection. >
(ii)_ Hydrodynamic and thermal boundary ne ess.
d. A 70 mm long circular surface of a circular h 35 mm diameter | 10 4
maintained at uniform temperature of 250°C. ¢ loss of energy to
the surroundings at 27°C, assuming the twoyelAs of the hole to be as
parallel discs and the metallic surfaces irroundings have a black
body characteristics.
€. Derive an expression for effecti NTU method for parallel flow. | 10 5
Question Marks [CO
Derive a general heat