Professional Documents
Culture Documents
Wagp 1 Par 9a M Sas 99 0007 Hydrocarbs 300 Ansi b1
Wagp 1 Par 9a M Sas 99 0007 Hydrocarbs 300 Ansi b1
WAGP-1-PAR-9A-M-SAS-99-0007
Please note that the “Document Control No.” (above and below) shall be used to refer to this
document henceforth from 2 March, 2005.
Correspondence dated prior to 2 March, 2005 may refer to this document using the “ITT
Document No.” (below).
Page 2 of 3
e:\projects\51399 - wagp\sp specifications\sp-03 current wagp specifications (word)\wagp-p-p-sa-0009-0 (hydrocarbons 300# ansi b1).doc
BRANCH CONNECTIONS
Branch Size Run Size
½ ¾ 1 1½ 2 3 4 6 8 10 12 14 16 18 20 24 30
½ T RT RT RT SL SL SL SL SL SL SL SL SL SL SL SL SL
¾ T RT RT SL SL SL SL SL SL SL SL SL SL SL SL SL
1 T RT RT SL SL SL SL SL SL SL SL SL SL SL SL
1½ T RT RT SL SL SL SL SL SL SL SL SL SL SL
2 T RT RT W W W W W W W W W W
3 T RT RT W W W W W W W W W
4 T RT RT W W W W W W W W
6 T RT RT RT W W W W W W
8 T RT RT RT RT W W W W
10 T RT RT RT RT RT W W
12 T RT RT RT RT RT W
14 T RT RT RT RT W
16 T RT RT RT RT
18 T RT RT RT
20 T RT RT
24 T RT
30 T
RT = Reducing Tee
T = Straight Tee
W = Weldolet
SL = Sockolet
SERVICE Hydrocarbons
DESIGN STANDARDS (Latest) ASME B31.3
ASME B16.5
ASME B16.9
ASME B16.10
ASME B16.11
GENERAL MATERIAL Carbon Steel
DESIGN PRESSURE 51 BARG @ -28.9 to 37.8°C (740
PSIG @ -20 to 100°F)
PRIMARY FLANGE RATING 300# ANSI RF
DESIGN CORROSION ALLOWANCE 1.6 mm (0.06250 inches)
PRESSURE TEMPERATURE LIMITATIONS 51 BARG @ -28.9 to 37.8°C (740
PSIG @ -20 to 100°F)
NOTE: Socketweld piping is required in this service below 2". Threaded piping is only permitted
where socketweld devices are not available. Where threaded piping is required (Limited to
11/2" NPT Maximum), the following shall apply:
1. Pipe wall thickness shall be schedule XXS minimum.
2. Fitting ratings shall match those specified for socket weld fittings
3. ASME B16.5, Pipe Flanges and Flange Fittings, shall be used to derate the maximum allowable
working pressure for temperatures from 37.8 to 343.3°C (100 to 650°F).
Page 3 of 3
e:\projects\51399 - wagp\sp specifications\sp-03 current wagp specifications (word)\wagp-p-p-sa-0009-0 (hydrocarbons 300# ansi b1).doc