The document calculates the steel reinforcement area of beams (T6). It provides material properties for concrete, longitudinal steel, and stirrup steel. It then shows calculations for the moment and shear forces in different beam sections labeled B68, B72, B73, B112, and B266. The required steel areas in both the positive and negative moment regions were found to be 0 cm2/m for all beam sections.
The document calculates the steel reinforcement area of beams (T6). It provides material properties for concrete, longitudinal steel, and stirrup steel. It then shows calculations for the moment and shear forces in different beam sections labeled B68, B72, B73, B112, and B266. The required steel areas in both the positive and negative moment regions were found to be 0 cm2/m for all beam sections.
The document calculates the steel reinforcement area of beams (T6). It provides material properties for concrete, longitudinal steel, and stirrup steel. It then shows calculations for the moment and shear forces in different beam sections labeled B68, B72, B73, B112, and B266. The required steel areas in both the positive and negative moment regions were found to be 0 cm2/m for all beam sections.
The document calculates the steel reinforcement area of beams (T6). It provides material properties for concrete, longitudinal steel, and stirrup steel. It then shows calculations for the moment and shear forces in different beam sections labeled B68, B72, B73, B112, and B266. The required steel areas in both the positive and negative moment regions were found to be 0 cm2/m for all beam sections.