Professional Documents
Culture Documents
PT 100
PT 100
com
4. Product Dimension
Patrol Device Installation and Quick Start Guide
m
52mm
183mm
can be enrolled by USB fingerprint scanner or patrol device. All the data such
as route and patrol plan configured by software should be synchronized with
81mm
the patrol device before using.
.co
1. Installtaion Mode I : Wall-Mount
128mm
74mm
5. Workflow
1) Drill holes on the wall accord ing 2) Pull the cables(includes the power 3) Fix the wall mounting Install patrol software
to the rear plate to mark positions. cables and USB cables) out of the plate with screws.
cabling holes.
Set checkpoint
es
Register patroller
Set event
4) Connect the power cables and USB 5 ) Fix the base to the mounting 6 ) Place the patrol machine
cables to the base. plate with screws. on the base. Set route
uid
Set shift
2. Installation Mode II : Desktop
1) Fix the wall mounting 2 ) Connect the power cables 3) Fix the base to the 4 ) Place the patrol machine Start to patrol
plate on the desk with and USB cables to the base. mounting plate with on the base.
screws. screws.
Collect data by software
-g
3. Product Introduction
Make reports
Front View Back View
LED Indicator
Fingerprint Sensor ID Card Swipe Area
Power Button PC, Patrol Software, USB Fingerprint Scanner/Card Issuer, Patrol Device,
Charging/Acquisition Base, USB Cable, Checkpoints (Location Tags).
Up Key
Down Key
Communication Interface
All manuals and user guides at all-guides.com