Professional Documents
Culture Documents
OmniVision OV7251
OmniVision OV7251
Ordering Information
Product Features ¬ OV07251-A35A-1G (b&w, lead-free,
35-pin CSP)
¬ OV07251-A35A-2B (b&w,
improved PLS, lead-free, 35-pin CSP)
¬ improved shutter efficiency for ¬ fast mode switching ¬ OV07251-G04A-1G (b&w, ¬ OV07251-G04A-2B (b&w,
machine vision applications reconstructed wafer with good die) improved PLS, reconstructed wafer
¬ supports horizontal and vertical 2:1 with good die)
¬ integral 850 nm bandpass filter and 4:1 monochrome subsampling ¬ OV07251-A35A-1J (b&w, lead-free,
35-pin CSP, black mask)
¬ 3 µm x 3 µm pixel with ¬ supports 2x2 monochrome binning
OmniPixel®3-GS technology
¬ one-lane MIPI serial output interface
¬ automatic black level calibration (ABLC)
¬ one-lane LVDS serial output interface
¬ programmable controls for:
- frame rate ¬ embedded 256 bits of one-time
Technical Specifications
- mirror and flip programmable (OTP) memory for
- cropping part identification ¬ active array size: 640 x 480 ¬ temperature range:
- windowing - operating: -30°C to +70°C junction
¬ two on-chip phase lock loops (PLLs) ¬ maximum image transfer rate: temperature
¬ support output formats: 8/10-bit RAW - 640 x 480: 120 fps - stable image: 0°C to +50°C junction
¬ built-in 1.5V regulator for core temperature
¬ support for image sizes: ¬ power supply:
- 640 x 480 ¬ PWM - analog: 2.8V (nominal) ¬ output interface: 1-lane MIPI/LVDS
- 320 x 240 - core: 1.5V (optional) serial output
- 160 x 120 ¬ built-in strobe control - I/O: 1.8V (nominal)
¬ lens size: 1/7.5"
¬ power requirements:
- active: 119 mW @ 120 fps, VGA output ¬ lens chief ray angle: 29° non-linear
- standby: 15 µA for AVDD,
40 µA for DOVDD without input clock, ¬ scan mode: progressive
700 µA for DOVDD with input clock
- XSHUTDOWN: 5 µA for AVDD, ¬ pixel size: 3 µm x 3 µm
5 µA for DOVDD
¬ image area: 1968 µm x 1488 µm
¬ output formats: 10-bit B&W RAW
OV7251
image sensor array output
interface
column
sample/hold
calibration
black level
row select
MIPI
AMP MDP/N
array ADC
gain
control
SIOD
EXTCLK
(6-27 MHz)
XSHUTDOWN
TM
FSIN/VSYNC
STROBE
PWM
TMO
4275 Burton Drive Tel: + 1 408 567 3000 OmniVision reserves the right to make changes to their products or to discontinue any product or
service without further notice. OmniVision, the OmniVision logo, and OmniPixel are registered
Santa Clara, CA 95054 Fax: + 1 408 567 3001 trademarks of OmniVision Technologies, Inc. CameraChip is a trademark of OmniVision
USA www.ovt.com Technologies, Inc. All other trademarks are the property of their respective owners.