Professional Documents
Culture Documents
2.0 BOOK#05 George Book Theory MMUP Exam Collection
2.0 BOOK#05 George Book Theory MMUP Exam Collection
Imporant
Civil 5
having Exam Questions
Q.2 : Consider the following characteristics regarding timber.
1. Stronger Variety
2. Ability to take very smooth finish
3. Toughness ﺻﻼﺑﺔ
4. Difficult to season
Which of the above characteristics is/are essential for timber to be used as beams?
a. 1 only
b. 2 and 3
c. 3 and 4
d. 1 and 3
a. 1,2 and 3
b. 1 only
c. 1 and 3 only
d. 3 only
a. Uniform settlement
b. Differential settlement
c. Rate of settlement
d. None of the above
Q.10 The factors that govern the workability of fresh concrete are?
a)since all real engineering projects are interdisciplinary all engineers should be
expert in all fields of engineering
b) the interdisciplinary nature of engineering means that all engineers should
study general engineering rather than specialize in a single area .
c) most engineers will wish to specialize , but all engineers must be able to work
effectively alongside others with complimentary skills
A. Responsibility matrix
B. Functional matrix
C. Cost account
D. Sub deliverable
E. Project overlap
A. Always critical
B. Always sub critical
C. Always super critical
D. Depending of specific channel conditions ……….
Q.19: Road project needs a gravel base. Which gravel do you recommend for the
project?
a. well graded gravel since gravels are same size and easily compacted
b. poorly graded gravel since gravels are same size and easily compacted
c. poorly graded gravel since gravels are different sizes and easily compacted
d. Well graded gravel since gravels are different sizes and easily compacted.
Civil 6 Civil 6 Civil 6 Civil 6 Civil 6 Civil 6 Civil 6 Civil 6 Civil 6 Civil 6
Civil 6 Civil 6 Civil 6 Civil 6
Q.5: Consider steady and uniform flow in a prismatic channel. The channel is
trapezoidal in cross section, with a base of width 5ft and sides . the channel
slopes 10 feet over its 0.5 mile length. Where is the velocity the greatest in the
channel?
a) At the upstream end
b) At the downstream end
c) 2/3 of the distance from the upstream end
d) None of the answers
Q.9) A bid for foundation construction is based on owner supplied soil boring test
results showing sandy clay to a depth of 6m. However during construction the
backhoe encounters Large pieces of concrete buried throughout the construction
site. This situation would normally be referred to a s?
a) A concealed conditions
b) Unexplained features
c) Unexpected characteristics
d) Hidden detriment
Q.13) The maximum vertical shearing stress due to VQ/lb in teh beam with a
rectangular cross section
a) Occurs where the normal stress is maximum
b) Occurs at the neutral axis
c) Occurs at the outermost fober
d) Is linearly dependent on the distance from neutral axis
Q.14) A bid manager is in charge of a closed bid in which several firms are
involved. The last day of the bidding period arrives and one firm has not yet
submitted an entry. Bbob calls the firm and asks if they are going to submit a bid
and they say they have been too busy to write a proposal but might be able to
get one worked out by the next day. He should
a) Open the bids and reveal the lowest bid to enxourage the firm to enter
b) Open the bids and quote a false low bid so they will enter but he will bot giving
away the contract
c) Tell them he cant do anything for them
d) Allow the firm to enter a late bid
Q.17) The ratio of the maximum normal stress due to maximum vertical shearing
stress in a cantilever beam of length (L), with and loaded at the end is given by
a) L/h
b) 2L/h
c) 4L/h
d) 2L/b
Q22) The process of identifying and evaluating contractors for a bid list is called
a) Prequalification
b) Forecasting
c) Fast tracking
d) None of the above
Q23) Soil samples extracted form the standard penetration test (SPT) can be
used in
a) Liquid limit test Confirm
b) Sieve analysis
c) Hydrometer test
d) All of the above at Some Places all
Q24) The earth pressure that is developed behind a retaining structure depends
on the movement of the structure relative to the soil. The active earth pressure
is developed when
a) The structure moves toward the soil
b) The structure does not move
c) The structure moves away from the soil
d) The structure and the soil move away from each other
Civil 8 Civil 8 Civil 8 Civil 8 Civil 8 Civil 8 Civil 8 Civil 8 Civil 8 Civil 8
Civil 8 Civil 8
Q.3) General conditions and home office overhead are examples of what type of
costs
a) Direct
b) Indirect
c) Both () a and b)
d) Contingency
Q.7) The factors that govern the workability of fresh concrete are ?
a) The quantities of cement paste and aggregate relative ot each other
b) The plasticity of the paste itself
c) The grading of the aggregate
d) The shape and surface characteristics of the aggregate
e) All of the above
Q.8) Referring to the figure , wat load combination produces the maximum uplift
on footing A?
a) Dead + live
b) Dead + wind
c) Dead
d) Dead + live + wind
Which of the following is
a) Decreases BOD
b) Is used to decrease mechanical failure
c) Involves the use of coagulations
d) Can come at any point in the treatment pain
Q.11) The undrained shear strength of clay equals
a) Twice the unconfined compressive strength
b) The unconfined compressive strength
c) Half the unconfined compressive strength
d) Not related to the unconfined compressive strength
Q.16) The --------------- beam theory provides a means of calculating the load –
carrying and defletion characteristics of beams
a) Ferris - witmer
b) Galileo - jacob
c) Leonhard - galilei
d) Eler – Bernoulli
Q.18) Concreting has to be done in cold weather . what type of cement is not
desirable?
a) Type iiii
b) Type iii
c) Type iv
d) Type v
Q.23) A municipal waste is treated with an activated sludge system with recycle
after primary classification. The solids retention time for the
a) Effluent quality
b) Recycle TSS concentration
c) Hydraulic retention time
d) Efficiency of the primary clarifier
Q7) In order to convert from metric system cm, to imperial system inch what
should you do ?
a) Multiply by 2.45
b) Multiply by 2.55 1 in=2.54cm
c) Divided by 2.54 so 2cm=2*1/2.54
d) Divided by 2.44
Q13) When an activity network is developed by using forward and backward pass
we can find out Exam#2
a) The longest time period that the project will take
Q15) In a two way slab the lifting of the edges of the slab occurs due
a) Resultant shear force at the ends
b) Torsional moments on the slab
c) Unbalanced moments on the slab
d) Heavy shear load at the mid span
Q.16) A two stage anaerobic digester is used to treat a combined primary and
secondary sludge compared to aerobic digestion, anerobic digestion
a) Produces more bacterial cells
b) Uses more energy
c) Is more expensive also this in one Q
d) Is more complex to ooperate
Q18) The slab is designed as one way if the ration of long span to short span is
a) Less tha 1
b) Between 1 and 1.5
c) Between 1.5 and 1.2
d) Greater than 2
Exam#2
Q20) What is a richer scale?
a) A scale for measuring the mass of an object
b) A logarithmic scale for measuring seismic energy of an earthquake
c) A scale for making angle measurement
d) A scale used to measure linear distances of structures and other large objects
Q25) What type of instrument/control system would you specify to insure that a
softening plant precipitation process (i.e, the reaction chemistry) was open
correctly?
a) Flow meter with proportional controller
b) Ph meter with proportional controller
c) Hardness meter with proportional controller
d) None of the above
Q26) The arc definition of the degree of curve (D) is defined as the
a) Central angle subtended by 100 ft of arc
b) Central angle subtended by 100 ft of chord
c) Central angle subtended by 50 ft of chord
d) Total arc length of the curve in stations divided by the total central angle of degrees
CIVIL 11
Q1) Before the development of any site, construction companies work on site
set-up to ensure:
Select one:
Q7) From among the following activities which is the best example of a project?
Select one:
Select One:
a 50
b 90
c 95
d 100
Q 12) Consider two beams with equal cross-sections, made of the same
material, having the same support conditions, and each loaded with equal
uniform load per length. One beam is twice as long as the other. The
maximum bending stress in the longer beam is larger by a factor of:
a 1.25
b 1.5
c 2
d 4
Select One:
Select one:
Q10) If a project has a CPI of 0.95 and an SPI of 1.01, this indicates:
CPI=EV/AC
Select one:
Q11) What is the primary use for fast Track scheduling? Answer D
Select one:
Q12 )A wastewater effluent is treated with chlorine gas (Cl2) to give a free residual
of 0.5 mg/l. The amount of chlorine required is:
Select one:
Select one:
Q17) Which of the following can represent an activity on a project network?
AON
Select one:
Q20) What is the difference between normally consolidated soils and over
consolidated soils? Answer D Exam#2
Select one:
i gave wrong ans
Q21) While working on the final stages of a job, you notice that one small clause in
the contract has been violated accidently. What should you do?
Select one:
Select one:
Select one:
Q26) Consider the following statements:
Ultrasonic pulse velocity test to measure the strength of concrete is
Select one:
Select one:
Q7) Which of the following statements regarding lateral earth pressure is correct?
Select one:
Q9) For a plain cartoon steel, all of the following are true except: Answer D
Select one:
Select one:
Q11) The ratio of maximum water demand to average water demand is called the:
Select one:
Q16) A two stage anaerobic digester is used to treat a combined primary and
secondary sludge. Compared to aerobic, digestion, anaerobic, digestion.
Q18) All of the followings are true about work packages except:
Select one:
Q19) The lowest element in the hierarchical breakdown of the WBS is:
3. Curing of Concrete 3
Select one:
chegg.com
Q2) In order to provide the proper geometric standard for each roadway
highway component what is it that needs to be established
a) Functional classification
b) Road networks
c) Exiting designs
a) the required fire flow is nearly the same as the average day demand
b) the required fire flow is between 2 times and 5 times the average day
demand
c) the required fire flow is between 5 times and 100 times the average day
demand
d) the reqired fire flow is more than 100 times average day demand
a) Vertically
b) Horizontally
c) Along the ground surface
d) Between the ellipsoid and geoid
a) It is easily available
b) It is the cheapest and good in strength
c) The coefficient of thermal expansion of steel and concrete are almost the
same
d) It forms a good bond
Q21) Your boss has just approved the initiation of a project to celebrate
qatara. Sadia has been assigned the project manager by the boss. Sadia
very first task should be to
Q23) A structure is shown in the figure. For a stress check of colum A1,
which of the following statements is true?
a) Bid bond
b) Performance bond
c) Acceptance bond
d) Payment bond
Q25) If three non parallel forces holds a rigid body in equilibrium they
must
a) Be equal in magnitude
b) Be concurrent
c) Be non concurrent
d) Form an equilateral triangle
e) Be collinear
a) Increases
b) Decreases
c) Increases and decreases
d) Remains constant
Q27) During a standard penetration test (SPT) unusually low blow counts
are encountered in a foundation expected to be medium sand . this is an
indication that the following condition may be present
a) The sampler drive shoe is badly damaged or worn due to too many
drivings to refusal
b) Cobbles are encountered
c) The sampler drive shoe is plugged
d) The ground water in bore hole is much lower than 111 situ conditions
immediately outside the borehole
A. Petroleum engineer
B. Mechanical engineer
C. Civil engineer
D. Chemical engineer
1. Improve workability
2. Improve durability
3. Reduce segregation during placing
4. Decrease concrete density
A. Cost
B. Availabillity
C. Reliability of deliveries
D. A and b only
E. All the above
10. Well point systems may be used as a dewatering method under certain
conditions. Which of the
following statements best describes the conditions where a single stage
wellpoint system is most
appropriate?
A. Deep cexacavation where the water table must be lowered more than 30 ft but less
than 50
ft
B. Permeable soils where draw down of the water table is greater than 30 ft but less
than 50 ft
C. A small, shallow excavation in dense or cement soils.
D. Permeable soils where draw down of the water table is less than 20 ft
19. What type of instrument control system would you specify to ensure
that a softening plant
precipitation (I.e., the reaction chemistry ) was operating correctly
1. Yield on entry
2. Clockwise circulation
3. Deflection of entering traffic
4. Central island
A. 1,2,3
B. 1,2,4
C. 1,3,4
D. 2,3,4