Professional Documents
Culture Documents
ISSUE 367 QUIZ-Charpy Impact Test Reduction Temperature For CVN VIII.2-ANSWER
ISSUE 367 QUIZ-Charpy Impact Test Reduction Temperature For CVN VIII.2-ANSWER
ANSWER
Chutchai Phromngam
Authorized Inspector & Supervisor
Line ID: cphromngam
cphromngam@eagle.org
FIG-1
Cont’d
ANSWER
2/9
Cont’d
3/9
4/9
PWHT : Yes [Required by construction iaw paragraph 6.4.2 and Table 6.8 of ASME VIII.2
Background:
Qualifying a WPS to be using for butt weld shell plate [see Fig-2] by coupon used plates mat’l SA-537 Cl2
(quenched and tempered) with T=42 mm. The coupon was one-Sided Weld, with GTAW, SMAW and SAW
process and PWHT performed. ANSWER
Cont’d
Note: See detail of test coupon at Fig-3. 5/9
What is the minimum charpy impact test temperature reduction below the MDMT for each set of weld
metal and HAZ impact test specimens for GTAW [see detail on FIG-3 ], when subsize specimens (10 mm x
5.33 mm) used?
A. 11.0˚C.
C. 6.0˚C.
D. None of above.
ANSWER
Cont’d
Reference Code para: 3.11.8.3 (g)(2)(-a), 3.11.7.5(b), and Table 3.11 6/9
Solution
Cont’d
ANSWER
7/9
Cont’d
ANSWER
8/9
ANSWER
9/9