Professional Documents
Culture Documents
Img - 0034 Esas 4 Refresher 2017 PRC 2
Img - 0034 Esas 4 Refresher 2017 PRC 2
Img - 0034 Esas 4 Refresher 2017 PRC 2
A 2. A is a branch of physics which concemed with the study of forces and toiques and their
efiect on motion.
A. dynamics C. kinetic energy
B. kinematics D. continuum
C 3. Two tugboats are towing a ship. Each exerts a force of 6 tons, and the angle between the
towropes is 60 deg. What is the resultdnt force on the ship?
A, 12 tons C. 10.4 tons
B. 6 tons D. 9.4 tons
C 4. For an equivalent coefficient of fric{ion of 0.6. What is angle of friction, phi?
A. 53.13 deg. C" 30.96 deg.
B. 36.87 deg. D. 21.80 deg.
A 5. A marble with a speed of 20 cm/sec rolls off the edge of a table 80 cm high. How far
horizontally from the table edge does the ma6le strike the floor?
A. 8.08 cm C. 7-07 cm
B. 8.80 cm D. 7.70 cm
c 6. A toy rifle is fired 8t afi €hQl€ of 60o above the horizontal. lf the pellet's initid velocity is 15 '
m/sec, What is the tirne of flight?
A. 1.32 sec C. 2.65 sec
B. 5.30 sec D. 3.12 sec
D L Determine the maximum thickness of metal plate in which a 10 inches diameter hole can
be punched, if the allowable compressive stress of the puncher is 50,000 psi and an
ultimate shear strength of the plate is 42,000 psi.
A. 3.89 in C. 4.98 in
B. 2.98 in D. 5.89 in
A' 9. What is the stress in an 8-inch round x 1&inch high concretg cylinder (E = 2.5 xt06 lbf/inz)
when the unit deformation is 0.0012 inch,
A. 3000lbfllnz{psi) C. 5000lbflln'?(psi)
B. 4000lbf/lnz(psi) D. 8100lbflln2(psi)
A l0.Determine the angular velocity of a rotating steel ring when allowable stress reaches 200
MPa. The mean radius of the fing is 250 mm and the massitensity of steel is 7850 kg/m3.
A. 638.5 rad/sec C. 159.6 radlsec
B. 685.3 rad/sec D: 165.9 rad/sec