| isamator
| PANERA Gas inoUsTaI Tok
——
MATERIAL SAFETY
DATA SHEET SasemTna 23, 2019 |
Oxygen a ' |
Label: Oxiizing
[{. CHEMICAL PRODUCT.AND COMPANY IDENTIFICATION,
‘Trade name
Use
Chemical formula
Company identification
Emergency phone nr
Physical state
Emergency overview
Routes of entry
Potential acute health effects
Inhalation
Skin
Eyes
Ingestion
+ Oxygen,
+ Various, laser applications, welding and cuting of metals, medical applications,
industrial applications, combustion aid.
Op
: PT. ANEKA GAS INDUSTRI Tbk.
Sales Region Jawa Timur
Plant
‘JL Raya Surabaya - Mojokerto km 19
Beringin Bendo — Taman, Sidoaro, 61257
Indonesia
Plant
‘JL. Berbek Indust I No. 23,
Berbek, Weru, Sidoero
Indonesia
+ (031) 7882505,
[HAZARDS IDENTIFICATION ]
Gas or liquefied gas.
= DANGER! STRONG OXIDIZER. HIGH PRESSURE GAS. CONTACT WITH
OTHER MATERIAL MAY CAUSE FIRE. Keep away from heat (<52°C/125°F},
Use oniy with adequate ventilation. Extremely hazardous gasfiquid under
pressure. Keep cylinder valve, closed when the product is not used. Gas may
‘accumulate in confined areas.
Inhalation, dermal contac, eye contact.
+ Inhlation ofthis product may cause hyperoxia
+ Dermal contact with a rapidly evaporating liquid could rosut in freezing of the
tissues or frostbite,
+ Liquid or rapidly evolving gas can cause bums similar to frostbite.
£ Since the product is @ gas, it wal probably be inhaled rather than ingested.
Consider first the preventive measures in case of Inhalation. Ingestion of quid
can cause burns similar to frostbite.
Dipindai dengan CamScanner‘ [MATERIAL SAFETY ___®*
& SAMATOR if No8
moans INDUSTRI Tbk DATA SH EET | Date of issue : April 23, 2019
2 Oxygen
[2HAZARDS IDENTIFICATION (continued)
Potential chronic health effects: CARCINOGENIC EFFECTS: Not avalabl.
MUTAGENIC EFFECTS: Not available,
‘TERATOGENIC EFFECTS: Not av
Medical conditions aggravated : None known.
by over- exposure
[3 COMPOSITION/INFORMATION ON INGREDIENTS
Substance name CAS No. Contents
Oxygen 2 7782-48-7 290.5%
[4 FIRST AID MEASURES
Prompt medical attention is mandatory in all cases of overexposure to this gas. Rescue personnel should wear
a self-contained breathing apparatus and be awared ofthe extremely high risk of ire, caused by
‘overoxygenated atmospheres.
Inhalation + In case of inhalation, conscious persons should be assisted to an uncontaminated
area and inhale fresh ar. The person should be kept warmed and. calm, Quick
‘emoval from the contaminated atea is mast important. Unconscious persons
should be moved to an uncontaminated area, Further treatment should be
symptomatic and supportive,
Skin contact + Remove contaminated clothing and rinse affected skin with lukewarm water. Do
‘ot rinse with hot water. Provide medical prompt attention, frozen tissue 1s
Painless and appear waxy, with a possible yellow color. Frozen tissue wil became
swollen, painful and prone to Infection when thawed.
Eye contact + Individual in contact with a gas should not wear contact lenses. Check for and
‘remove any contact lenses. In case of contact, immediately sh eyes with plenty
(of water for atleast 20 minutes. Get medical attention f symptoms occu.
Ingestion = Since the product is a gas, it will probably be inhaled rather than ingested.
Consider fst the preventive measures in case of inhalation.
Notes to physician The medical doctor must be wamed that the person may suffer from hyperoxia
[5 FIRE-FIGHTING MEASURES:
Flammability of product Non flammable. This gas vigorously accelerate combustion, Avoid all contact with
Combustible materials. Some non-flamamble materials in air will burn under an
overoxygenated atmosphere.
Products of combustion + No specific data,
Explosion hazards in the + Container explosion may occur under fire conditions oF when healed
presence of various substances
Firefighting media and, + Use an extinguishing agent suitable for the surrounding fire, Promptly isolate the
Instructions. ‘scene by removing all persons from the vicinity of the incident i there Isa fire. No
action shall be taken involving any personal risk ot without suitable training,
Contact supplier immediately for specialist advice. Move containers from fre area
if this can be done without risk. Use water spray to keep fre-exposed containers
cool.
Dipindai dengan CamScannerAS SANATOR |
PT ANEKA GAS INDUSTRI Tok | DATA SHEET Date of issue : April 23, 2019
|
MATERIAL SAFETY "22
Revised edition No.:3 |
Oxygen
GFIRE-FIGHTING MEASURES (continued)
Fire-fighting media and
instructions
‘Special protective equipment
for fire
+ Contains gas under pressure. Contact with combustible material may cause fire.
+ Firefighters should wear appropriate protective equipment and se-contained
This material increases the risk of fre and may aid combustion. In a fre or if
heated, a pressure increase will occur and the container may burst or explode.
breathing apparatus (SCBA) with a full facepiece operated in postive pressure
mode,
[ACCIDENTAL RELEASE MEASURES.
T EVACUATE ALL PERSONNEL FROM AFFECTED AREA. Use appropriate
Personal precautions
Environmental precautions
Clean up methods
protective equipment. fleak is in user's equipment, be certain to purge piping with
an inert gas prior to attempting repairs. I leak is on cylinder or cyinder’ valve,
Contact the closest Anoka Gas indust location.
+ Ensure emergency procedures to deal with accidental gas releases are in place to
avoid contamination of the environment. Inform the relavant authorities i the
Product has caused environmental polluton (sewers, waterways, soll or air).
+ Immediately contact emergency personnel, Stop leak if without risk. Ventilate
area. Stop leak if without risk. Use spark-proof tools and explosion-proot
equipment.
[_ HANDLING AND STORAGE.
Storage
Handling
Protect cylinders from physical damage. Store in cool, dy, well-ventilated area of
‘non combustible construction away from heavily Waficked areas and emergency
exits. Do not allow the temperature where cyinders are slored to exceed
'52°C/N25°F. Cylinders must be slored upright and firmly secured to prevent falling
for being knocked over. Full and empty cyinders should be segregated. Use a “ist
in first out” inventory system to prevent full eyinders being stored for excessive
Periods of time. Post ‘No Smoking or Open Flames" signs in the slorage or use
‘area, There should be no source of ignition i the storage or use area,
: Valve protection caps must remain in place unless cylinder is secured with valve
ut piped to usage point. Do not drag, slide or rol cylinders. Use a suitable hand
tuck for cylinder movement, Use a pressure regulator when connecting cylinder to
lower pressure piping or systems, Do not heat cylinder by any means to increase
‘he discharge rate of product from the cylinder. Use a check valve or trap in the
discharge line to prevent hazardous back flow to the cylinder. Do not tamper with
(valve) safety device. Close valve after each use and when empty.
[BEXPOSURE CONTROLSIPE!
ERSONAL PROTECTION
Engineering controls
Personal protection
Respiratory
Hands
Eyes
Skin I body
+ Use only in wellventilated areas.
+ Respirator selection must be based on known or anticipated exposure levels, the
hazards ofthe product and the safe working limits ofthe selected respirator.
Wear suitable gloves for the application.
safety glasses with side shields.
Wear appropriate personal protective suit. Metat cap, safely shoes are
recommended when handling cyinders.
Dipindai dengan CamScanner‘ |MATERIAL SAFETY —
SAMATOR |
aetna DATA SHEET
|
oo
pri 23, 2019
[8 EXPOSURE CONTROLS/PERSONAL PROTECTION (continued)
‘Some applications of this product may require additionnal or other specific protective clothings. Please consult
your supervisor.
Personal protection in case of: Safety glasses, goggles or face shield, Impervious gloves. Full sut. Metal cap,
‘a major leak safely boots. Wear approved self-contained breathing apparatus or equivalent and
{ull protective gear.
Exposure limits + None assigned, Inhlaton ofthis product may cause hyperoxia,
[B PHYSICAL AND CHEMICAL PROPERTIES:
Physical state at 20°C + Gas or liquefied gas.
Colour + Colourtess.
Odour + Odortess.
Molecular weight +: 329/ mole
Melting point °C} -218.55°C (.361.4°F)
Bolling point [°C] 483.11°C (-297.6°F)
[10 STABILITY AND REACTIVITY,
‘Stability and reactivity 7 The products stable,
Incompatibility with various = Reactive or incompatible withthe following materials: organic materials,
substances
Hazardous decomposition: Under normal conditions of storage and use, hazardous decomposition products
products should not be produced.
Hazardous polymerization = Under normal condlions of storage and use, hazardous polymerization will not
[44-TOXICOLOGICAL INFORMATION
‘Acute Effects
Inhalation + Inhalation of this product may cause hyperoxia
skin + Dermal contact with 2 rapidly evaporating liquid could result in freezing of the
tissues oF frostbite.
Eyes. + Liquid or rapcly evolving gas can cause bums similar to frostbite,
Ingestion + Sinoe the product is a gas, it will probably be Inhaled rather than ingested. Consider
first the preventive measures in case of inhalation. Ingestion of liquid can cause
bums similar to frostbite
Potential chronic health + Carcinogenic effects: Not avaiable.
effects ‘Mutagenic effects: Not available.
Teratogenic effects: Not available.
[12 ECOLOGICAL INFORMATION oe Saapaas
Products of degradation _: This gas's released as is in the atmosphere.
Dipindai dengan CamScanner! (MATERIAL SAFETY —__
Ae SANATOR DATA SHEET
Oxygen
[13 DISPOSAL CONSIDERATIONS
Disposal
Do not attempt to dispose of the container or of its content. Retum in the shipping
Container property labeled, with any valve outlet plugs or caps secured and valve
Protection cap in place to Aneka Gas Indust for proper disposal. For emergency
disposal, contact he closest Aneka Gas Indust location.
[14 TRANSPORT INFORMATION
UNNo, Gas 1072
UN No. Liquid 1073
Classes 122
Labelling + Label : Oxiizing,
Proper shipping name OXYGEN COMPRESSED
OXYGEN REFRIGERATED LIQUID (cyogenic liquid)
[15 REGULATORY INFORMATION
[16 OTHER INFORMATION
Other transport information: Avoid transport on vehicies where the load space is not separated from the driver's
Compartment. Ensure vehicle driver is aware ofthe potential hazards ofthe load and
knows what to do in the event of an accident or an emergency.
Before transporting product containers:
~Eneure that containers ae firmly secured,
+= Ensure oyinder valve is closed and not leaking,
Ensure valve outlet cap nut or plug (where provided) is correctly fit.
Ensure valve protection device (where provided) is correctly fied.
= Ensure there is adequate ventilation.
= Compliance with applicable regulations,
DISCLAIMER OF LIABILITY: Before using this product in any new process or experiment, a thorough material
compatibility end safety study should be cartied out. Detals given in this document
are believes to be correct atthe time of going to press. Whilst proper care has been,
taken in the preparation ofthis document, no lablty for injury or damage resulting
from its use can be accepted.
Dipindai dengan CamScanner