Professional Documents
Culture Documents
AMMM00002WK
AMMM00002WK
AMMM00002WK
CERTIFICATE
This is to certify:
That
Both-Well Steel Fittings Co., Ltd.
No. 303, Renxin Rd., Renwu District, Kaohsiung 814020,
Taiwan
is an approved manufacturer of
Steel forgings
in accordance with
DNV GL rules for classification – Ships
Manufacturer(s) approved by this certificate is/are accepted to deliver according to DNV GL, DNV and GL rules.
Materials to be applied to DNV classed object shall fulfill the material requirements in the applicable DNV class rules.
LEGAL DISCLAIMER: Unless otherwise stated in the applicable contract with the holder of this document, or following from mandatory law, the liability of DNV AS, its
parent companies and their subsidiaries as well as their officers, directors and employees (“DNV”) arising from or in connection with the services rendered for the
purpose of the issuance of this document or reliance thereon, whether in contract or in tort (including negligence), shall be limited to direct losses and under any
circumstance be limited to 300,000 USD.
Form code: AM 311 Revision: 2021-03 www.dnv.com Page 1 of 3
Job Id: 263.11-011256-1
Certificate No: AMMM00002WK
Remarks:
1) CD: Closed die forging
2) QT: Quenched and tempered (fittings with outer diameter ≥ 92 mm)
N: Normalised (fittings with outer diameter < 92 mm)
3) Incl. equivalent grades in acc. to other standards
4) Products: Forged pipe fittings, as elbow, tee, cross, coupling, cap, etc. (socket and butt weld type; threaded)
acc. to recognized standards
5) Possible application and certification of fittings with design temperature below 20°C as subject to case by case
approval based on relevant design and construction rules for some components;
Products successful (min. 27 Joule) impact tested at -20°C (normalized condition, outer diameter < 92 mm)
and at -46°C (quenched and tempered condition, outer diameter ≥ 92 mm)