Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

ATTENTION a TIMEKEEPING c STOPWATCH

USER'S GUIDE
YP17747(MULTI FUNCTION SPORT WATCH)
1. Never try to open the case or remove its back cover.

2. Do not operate buttons under water.


12/24H Format
A Lap Time
In the timekeeping mode, press "A"
to switch between 12/24H formats.
CITIZEN WATCH CO.,LTD. 3. Should moisture appear inside the watch,have it 1. In the stopwatch mode,
Q&Q SALES DEPARTMENT checked immediately by your dealer. Otherwise Calendar press "D" to start the
it can cause erosion of the metal parts of the watch. stopwatch;
In the timekeeping mode,
Stopwatch EL Backlight press and hold "D" to display:
4. Though the watch is designed to withstand
Year, Month, Date.
normal use, you should avoid rough use or 2. To stop the stopwatch
dropping the watch. by pressing "D" again;
Time Setting
Dual Time Alarm
5. Avoid exposing the watch to temperature extremes. 1. In the timekeeping mode,press and
3. Press "A" to reset the stopwatch.
hold "A" until the seconds to flash;
6. Wipe the watch with dry, Soft cloth only. Avoid all
(flashing indicated in set mode)
11 100 Years Calendar Chime owing it to come into direct contact with chemical
materials, which can cause deterioration of the 2. Press "D" to reset the seconds ;
plastic parts of the watch.
3. Press "B" change to the Split Time
100
100M Water Resistant Battery(CR2025) 7. Avoid to wear the watch in electromagnetic, next selection;
1. In the stopwatch mode,press "D"
static conditions.
4. Press "D" to increase the number, to start the stopwatch;
press and hold to increase at 2. Press "A" to display the split time,
high speed; stopwatch timing continues
BUTTONS MODE SELECTION internally;
5. Repeat step 3 and 4, the selection
Press "B" to change mode to mode in the in the following sequence: 3. Press "A" to clear the split time and
The operation of buttons are indicated by using following Sequence: Seconds Hour Minutes to continue time measurement;
the letters shown in the illustration. Timekeeping Mode Alarm Mode Year Month Date;
Stopwatch Mode Dual Time Mode. 4. Repeat step 2 and 3, you can
6. Press "A" to exit the set state, after measure themulti split time;
you set.(The day of week is autom-
a TIMEKEEPING atically displayed in accordance with
12/24H Format; year, month and date setting) 5. Press "D" to stop the stopwatch.
Hour, Minutes, Seconds,
Day of week, Date;
"A" "D" 100 years Calendar (2000 ~ 2099). b ALARM d DUAL TIME
Alarm and Chime
b ALARM Dual Time Setting
Hourly time signal; In the alarm mode, press
"D" to on/off the alarm
"C" The alarm sounds at the
"B" and chime in the 1. In the dual time mode,
preset time each day. following sequences: press "A" the hour to
Alarm & Chime off flash; (flashing
"E"
c STOPWATCH Alarm on Chime on
Alarm & Chime on.
indicated in set mode)

1/100 second unit;


A -- Reset Measuring range: Alarm Time Setting 2. Press "D" to increase
B -- Mode 0'00"00 ~ 23:59'59". the hour, press and
1. In the alarm mode, press "A" the
hold to increase at
C -- EL backlight hour to flash, the indicator " "
high speed;
D -- Start / Stop d DUAL TIME appear;(flashing indicated in
set mode)
E -- EL backlight The time for other time zone.
2. Press "D" to increase the hour,
press and hold to increase
3. Press "B" to select the
DISPLAY BACKLIGHT at high speed;
minutes;
3. Press "B" to select the minutes;
The backlight that uses an EL (electro-luminescent)
The screen shown in below: cause the display to glow for easy reading in the dark.
4. Press "D" to increase the
minutes,press and hold to
Use EL Backlight increase at high speed;
4. Press "D" to change the
minutes; (press once
Day of week Date 5. Press "A" to exit the set state, change 30 minutes)
In any mode, press after you set.
"C" or "E" to illuminate the
Hour display about 3 seconds.
Seconds
The alarm sounds at the preset time each day for
Minutes
about 60 seconds, press any button to break it. 5. Press "A" to exit the set state, after you set.

You might also like