This document contains a quiz with 15 multiple choice questions about system components of building electrical systems. The questions cover topics like types of branch circuits, circuit breakers, conductors vs insulators, types of fixtures, receptacle placement, raceways, switch and panel installation heights, service entrance components, independent circuits, and conduit types. The document identifies the content as belonging to JPT Review Center and being related to an exam on building system components.
This document contains a quiz with 15 multiple choice questions about system components of building electrical systems. The questions cover topics like types of branch circuits, circuit breakers, conductors vs insulators, types of fixtures, receptacle placement, raceways, switch and panel installation heights, service entrance components, independent circuits, and conduit types. The document identifies the content as belonging to JPT Review Center and being related to an exam on building system components.
This document contains a quiz with 15 multiple choice questions about system components of building electrical systems. The questions cover topics like types of branch circuits, circuit breakers, conductors vs insulators, types of fixtures, receptacle placement, raceways, switch and panel installation heights, service entrance components, independent circuits, and conduit types. The document identifies the content as belonging to JPT Review Center and being related to an exam on building system components.
ANSWER TO QUIZ NO. 2: SYSTEM COMPONENTS OF BUILDING
MULTIPLE CHOICE: Choose the letter of the best answer. 1. Branch circuits are divided into three types by the PEC, and one of these is a. 3P Circuit b. SP Circuit c. Integrated Circuit d. Independent Circuit 2. A branch circuit is protected by a. Service Switch b. Circuit Breaker c. Switch Panel d. Service Board 3. It prevents flow of electric current a. Conductor b. Insulator c. Wires d. Cable 4. This offers low resistance a. Conductor b. Insulator c. Wires d. Cable 5. LED is a type of fixture a. False b. True c. Not sure d. NOTA 6. A receptacle that is placed 0.30m from the floor where an appliance is plugged a. Switch b. Jack c. Convenience Outlet d. Extension wire 7. Another term for channel is a. Pipe b. Raceway c. Tubing d. Duct 8. Height of switch installation a. 0.90m b. 1.20m c. 1.50m d. 1.80m 9. Point of entry of electrical service is a. Service Cable b. Service Drop c. Gooseneck d. Service Oblique 10. The Service Switch is usually located at a. Electrical Pole b. Carport c. Stairway d. Kitchen 11. One type of appliance that is considered an independent circuit a. Electric Fan b. Range c. Microwave Oven d. Washing Machine 12. One type of appliance that is not considered an independent circuit a. Pump b. Range c. Heater d. Washing Machine 13. Height of installation for a Power Panel a. 6’ b. 7’ c. 6’7” d. 7’2” 14. A single line diagram showing system components a. Key Plan b. Key Cock c. Riser d. Riser Diagram 15. A type of conduit used primarily for service entrance cable a. EMC b. RSC c. IMC d. Riser
This module is the property of JPT Review Center, Inc.
A Design in Which The Tension Capacity of The Tension Steel Is Greater Than The Combined Compression Capacity of The Concrete and The Compression Steel