Professional Documents
Culture Documents
PG30
PG30
PRESSURE GAUGES
PG-30
INTERNAL STRUCTURE
5 1 2
EMC
marking
Compatible with EMC directive
6
Part name
3 4
Material P-2000 NBR Aluminum Die-casting NBR PBT (Polybutyleneterephthalate) Polyester
1 2 3 4 5 6
Pressure sensor Sensor O ring Adaptor Case O ring Case Panel sheet
FEATURES
Compact and lightweight general-purpose pressure gauges
Innovative general-purpose gauges of compact design (30mm sq.) and drip-proof structure (IP-65).
Low consumption by nondisplay mode Set data protection by panel lock function
PG-30-101 R-N
Switch output interface
NNPN open collector PPNP open collector
Pressure reference
RCompound pressure (Negative pressure ~ Positive pressure)
Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
COPAL ELECTRONICS
PRESSURE GAUGES
PG-30
Fitting Rc 1/8
Gauge 10 ~ 10 kPa
PG-30-101R-N PG-30-101R-P
NPN PNP
ACPG-004
STANDARD SPECIFICATIONS
Unless otherwise specified, the specs are defined at an ambient temperature of 255 C and excitation voltage of 12 V DC. Item
Pressure reference Pressure medium Rated pressure range Maximum pressure Break-down pressure kPa kPa kPa C C %RH 10 ~ 10 20 50
Model number
101R
PG-30 102R
Gauge Non-corrosive gases 100 ~ 100 200 500 10 ~ 50 0 ~ 50 35 ~ 85 In accordance with IEC IP-65 2-Rc 1/8 Aluminum die-casting, silicone
103R
General specifications
Operating temp. range Compensated temp. range Operating humidity Protection grade Pressure port Material of pressure port attachment Net weight Thermal error Insulation resistance Dielectric strength Input voltage Consumption current
Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
COPAL ELECTRONICS
PRESSURE GAUGES
PG-30
STANDARD SPECIFICATIONS
Unless otherwise specified, the specs are defined at an ambient temperature of 25 5 C and excitation voltage of 12 V DC. Item
Display element
Model number
101R
9.99 ~ 9.99
PG-30 102R
Full 3-digit LED 99.9 ~ 99.9 Max. 11 settings Red LED is ON. 1% NPN/PNP 2-point output (Transistor, Open collector output) Separate mode / window comparator mode
30 V DC 100 mA
103R
100 ~ 999
Display
Rated display range Multiplier settings Negative pressure display Display accuracy Output status
kPa
Switch output
Short-circuit protection
0 ~ 300 countsAdjustable 0.2 %F.S. 1 count ( 0.3 %F.S. maximum) Approx. 5, 25, 250, 2500 ms Adjustable
Repeatability Response
Analog output
3 modes
Output voltage V zero : Pin=0, V span : Pin=0Pin (H) Impedance Resolution Response
Approx. 5, 25, 250, 2500 ms Adjustable Seal screw, M 5 connecting joint screw
Accessories
ENVIRONMENTAL CHARACTERISTICS
Test item Vibration Shock Pressure cycling Moisture resistance EMC Test conditions
10 ~ 500 Hz, 98.1 m/s2 or 1.5 mm P-P, 3 directions for 2 hours each 490 m/s2, 3 directions for 3 times each 0 ~ Rated pressure106 cycles 40 C, 90 ~ 95 %RH, 240 hrs. Pressure indication, switch operating pressure and analog output : 5 %F.S. maximum during test 1
Permissible change
2 %F.S. maximum after test 1 Amount of analog output fluctuation is permitted by adding conversion error of 20 mV.
EMI : EN55011: 2007, A2 : 2007 Group 1, class B EMS : EN61326-1 : 2006 Table 2 Change in the pressure indication, switch operating points and analog output.
PNP
LED Indicator Power B
Load Load
1 2
Pressure Sensor
Main circuit
Pressure Sensor
Main circuit
S.Output2
Load
Load
FG
Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
COPAL ELECTRONICS
PRESSURE GAUGES
PG-30
Selection code
Diagonal column: Display multiplier cannot be selected due to resolution and number of digits. (Selection code is not indicated either.) Selection code is set at 1 prior to shipment.
2.95 ~ 2.95
29.5 ~ 29.5
When shipped from our factory-101R : R mode is set at 1, 102R : V mode is set at 3 and 103R : G mode is set at 2. The above 3 types can be set at 1, 2 or 3. However, the accuracy at V mode of 103R cant be guaranteed.
SW1
Window comparator Separate
SW2
Window comparator
Separate mode
HI operation
ON OFF -Pr P1: SW1 H P2: SW2 Pr H
HI
LO
HI
LO
1 2 3 4 5 6 7 8
Pressure setting (Operating point)
Setting 1 (Lower limit) : Setting 1 (Upper limit) : Setting 2 Setting 2 (Lower limit) : Setting 1 (Upper limit) : Setting 2
LO operation
ON OFF Pr H H
B operation
ON
P2: SW2
OFF -Pr
P1 H H
P2
OFF Pr
P1P22H
Note 1. In the Separate Mode, setting 1 corresponds to SW1, and Setting 2 corresponds to SW2. Note 2. In the Window Comparator Mode, the minimum value for SW1 and SW2 corresponds to Setting 1 and the maximum value corresponds to Setting 2.
Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
COPAL ELECTRONICS
PRESSURE GAUGES
PG-30
OUTLINE DIMENSIONS
PG-30
30 35.5 9 Vent hole
30
Connection Power B Analog output Switch output 1 Switch output 2 Common Fitting
(Unit: mm)
30
18
2-3.5
20
2-3.5 39
30
4.25.2 Slot
20
4.2
MaterialSUS304 t = 1.5
Fixed
18
15
Fixed
15 4.2 20 4.25.2 Slot
25
20 15
20
30
MaterialSUS304 t = 1.6
Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
40
COPAL ELECTRONICS
PRESSURE GAUGES
PG-30
(Unit: mm)
PG-30 PG-35 PG-35H PG-35L Panel cut holder set & holder cover set
42.6 40
5.7 4.5
23.5
36
+0.5 0
Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.
36 +0.5 0
Panel cut dimension (Panel board thickness : 1 ~ 3.6 mm)