Professional Documents
Culture Documents
5292 3C Issue 2
5292 3C Issue 2
MAX. ENGINE POWER MAX. BACKHOE DIG DEPTH MAX. LOADER CAPACITY 85hp (63kW) 5.49m (18ft) 0.95m (1.25yd)
B C
F J D A
E H G
STATIC DIMENSIONS
JCB Backhoe Loaders feature heavy duty one piece mainframe, componentised driveline and fully enclosed engine compartment. All fluid and component compartments are lockable using the ignition key. Machine model A Transport length B Transport height standard backhoe C Height to top of cab/canopy D Overall width with bucket E Ground clearance mainframe 3C-2WD mm (ft-in) 5520 (18-1) 3400 (1 1-2) 2820 (9-3) 4240 (7-4) 350 (1-1) 3C-4WD mm (ft-in) 5520 (18-1) 3400 (1 1-2) 2820 (9-3) 4240 (7-4) 350 (1-1) F Ground clearance front axle G Front wheel track H Rear wheel track J Wheelbase Machine model 3C-2WD mm (ft-in) 360 (1-2) 1860 (6-1) 1770 (5-9) 21 (6-1 10 1) 3C-4WD mm (ft-in) 250 (0-10) 1890 (6-2) 1770 (5-9) 2160 (7-1)
A Product of Hard Work
STEERING
Power hydrostatic system utilising the main hydraulic pump via a steering priority valve. Emergency power off steering. Machine model Steering axles Type Steering turns lock to lock 3C-2WD Front Hydrostatic 3.00 metre (ft-in) 8.05 (26-5) 10.6 (34-9) 3C-4WD Front Hydrostatic 3.00 metre (ft-in) 8.05 (26-5) 10.6 (34-9)
ENGINE
Direct injection diesel. 20" fan with internal precleaner, belt-driven water pump, cold start aid territory dependant. Machine model Engine emissions Manufacturer Aspiration Displacement No of Cylinders Bore size Stroke Rated Engine RPM Power Ratings Gross ISO 14396 (SAE J1995) Net (SAE J1349) Max Torque Gross ISO 14396 (SAE J1995) Net (SAE J1349) Max. Torque RPM 320 (236) 315.5 (232.7) 1200 85 (63) 79.8 (59.5) Nm (lbf ft) 362 (267) 355.9 (262.5) 1200 Nat asp 4.4 ltr 4 103 132 2200 hp (kW) 85 (63) 79.8 (59.5) Stage 2 JCB Turbocharged 3C Stage 3
FRONT AXLE
JCB front axles are designed and built specifically for backhoe loaders and accept a wide variety of tyre combinations. Machine model Type Axle ratings Static load rating Dynamic load rating Oscillation angle Steering ram 3C-2WD Flame cut bar with fixed tread kg (lb) 16508 (36383) 8303 (18300) 16 Power track rod 3C-4WD JCB Max-Trac torque proportioning kg (lb) 16508 (36383) 8303 (18300) 16 Power track rod
TRANSMISSION
The JCB Transmissions are designed and built specifically for JCB Backhoe Loaders. They feature synchronised shifting in all gears. Powershuttle between forward and reverse. Ground speeds are designed to maximise production. Machine model Manufacturer Type Torque converter Torque converter ratio Gears forward/reverse Gear selection Shuttle control F/R Travel speeds Tyres equipped Gear 1 Gear 2 Gear 3 Gear 4 3.01:1 4F/4R Manual Power shuttle kph (mph) 16.9x24 5.06 (3.1) 8.2 (5.1) 17 (10.5) .5 33.16 (20.6) 3C-2WD JCB JCB Synchroshuttle Single stage, dual phase 3.01:1 4F/4R Manual Power shuttle kph (mph) 16.9x24 5.06 (3.1) 8.2 (5.1) 17 (10.5) .5 33.16 (20.6) Heavy duty suspension seat (option) Heater/pressuriser Front and rear wipers Front and rear window washers 2" seat belt (3" option) 4 front and 2 rear work lamps 12V power outlet Instrument vandal cover Brake lights, hazard lamps, turn signals Interior rear view mirror Side-mounted instrument panel Deluxe floor mat Cup holder 3C-4WD JCB JCB Synchroshuttle
REAR AXLE
JCB rear axles are designed and built specifically for backhoe loaders and accept a wide variety of tyre combinations. Machine model Type Axle ratings Static load rating Dynamic load rating 3C-2WD kg (lb) 2501 (55125) 1 12505 (27562) 3C-4WD kg (lb) 2501 (55125) 1 12505 (27562)
OPERATORS AREA
Meets SAE ROPS to ISO3471 EN13510 FOPS to ISO3449 EN13627 (Level 2) requirements. Standard features include the following: Cab
Canopy
LOADER DIMENSIONS
Machine model Overall width with bucket M Dump height N Load over height O Loader hinge pin height P R T V Maximum operating height Rollback @ ground degrees Digging depth Dump angle degrees Q Dump reach at full height 3C-2WD mm (ft-in) 2240 (7-4) 2690 (8-10) 3200 (10-6) 3380 (1 1-1) 4060 (13-4) 810 (2-8) 41 130 (0-5) 42 3C-4WD m (ft-in) 2240 (7-4) 2690 (8-10) 3200 (10-6) 3380 (1 1-1) 4060 (13-4) 810 (2-8) 41 130 (0-5) 42 Bucket breakout force Lift capacity to full height
SERVICE CAPACITIES
3C-2WD litre (gal) 18.5 (4.1) 130 (29) 15 (3.3) 16 (3.5) 16 (3.5) N/A 2 (0.4) 75 (16.5) 1 (25.3) 15 3C-4WD litre (gal) 18.5 (4.1) 130 (29) 15 (3.3) 16 (3.5) 16 (3.5) 4.2 (16) 2 (0.4) 75 (16.5) 1 (25.3) 15
TYRES
Tyres listed are most popular sizes. See your JCB Dealer for a full listing of available tyre sizes and tread patterns. Machine model 1 1L-16, F3, 12 ply front 16.9-24, R4, 12 ply rear 14-17 FWD, 10 ply front .5, 16.9-24, R4, 12 ply rear 17 x 24 x 10 rear .5 19.5L x 24 x 10 rear 19.5L x 24 x 12 rear 19.5L x 24 x 12 rear 12.5 x 18 x 10 front 16.9 x 28 x 12 rear Optional Optional Optional Optional Optional Optional 3C-2WD Standard Standard Standard Standard 3C-4WD
Weight (+ Teeth) kg (lb) 102 (225) 1 (257) 17 122 (269) 142 (314) 163 (359) 183 (403) 203 (448) Teeth 3 3 3 4 5 5 6
2)
0.48 (38)
* Including sidecutters. Width less sidecutters deduct 25mm (1in). Capacity in cu.yd.
BACKHOE BUCKETS
JCB Backhoe Loader buckets are designed specifically for use on JCB machines. Optional dual position tipping link provides positions to maximize tearout force or to maximise rotation for straight wall digging and improved load retention. Width* mm (in) 3811676 (1566) 3051067 (1242) 0.07 (2) 0.12 (4)
TAPERED BUCKETS
Capacity SAE Rated m3 (ft3) Struck m3 (ft3) 0.06 (2) 0.10 (3) Angle degrees 30 60 Teeth 2 2
Capacity SAE Rated m3 (ft3) 0.04 (1) 0.06 (218) 0.075 (2) 0.09 (3) 0.12 (414) 0.17 (6) 0.24 (812) 0.30 (1012) Struck m3 (ft3) 0.03 (1) 0.05 (134) 0.06 (2) 0.07 (212) 0.09 (3) 0.13 (412) 0.17 (6) 0.21 (714)
Weight (+ Teeth) kg (lb) 95 (209) 102 (225) 105 (231) 109 (240) 1 (256) 16 140 (310) 162 (355) 198 (435) Teeth 0 3 3 3 3 4 5 5
(37)
* Including sidecutters. Width less sidecutters deduct 25mm (1in). with additional wear strips to give added strength and rigidity.
DITCHING BUCKETS
Width* mm (in) 1525 (60) 1830 (72) 0.22 (7) 0.26 (9) Capacity SAE Rated m3 (ft3) Struck m3 (ft3) 0.155 (5) 0.186 (6) Weight kg (lb) 150 (330) 172 (379)
A Product of Hard Work
BACKHOE PERFORMANCE 3C
standard backhoe kg (lb) Bucket force Dipper force
F D E
C A
JCB Sales Limited, Rocester, Staffordshire ST14 5JP Tel: 01889 590312. Fax: 01889 590588. Web: http://www.jcb.com .
JCB reserves the right to change specifications without notice. Illustrations shown may include optional equipment and accessories. The JCB logo is a registered trademark of J C Bamford Excavators Ltd. 9999/5292 5/08 Issue 2