Professional Documents
Culture Documents
Home Audio System: Operating Instructions
Home Audio System: Operating Instructions
Disc/USB Playback
Operating Instructions
USB Transfer
Tuner
BLUETOOTH Connection
Gesture Control
Sound Adjustment
Other Operations
Additional Information
MHC-V81D/MHC-V71D
For customers in Europe
WARNING
To reduce the risk of fire, do not
cover the ventilation opening of
the appliance with newspapers,
tablecloths, curtains, etc.
Do not expose the appliance to naked This appliance is classified as a CLASS 1
flame sources (for example, lighted LASER product under IEC 60825-1:2007.
candles). This marking is located on the rear
To reduce the risk of fire or electric exterior.
shock, do not expose this appliance
to dripping or splashing, and do not Disposal of waste batteries
place objects filled with liquids, such as and electrical and electronic
vases, on the appliance. equipment (applicable in the
As the main plug is used to disconnect European Union and other
the unit from the mains, connect the countries with separate
unit to an easily accessible AC outlet.
Should you notice an abnormality in collection systems)
the unit, disconnect the main plug This symbol on the
from the AC outlet immediately. product, the battery or on
the packaging indicates
Do not install the appliance in a
that the product and the
confined space, such as a bookcase or
battery shall not be
built-in cabinet.
treated as household
The unit is not disconnected from the waste. On certain batteries this symbol
mains as long as it is connected to the might be used in combination with a
AC outlet, even if the unit itself has chemical symbol. The chemical symbol
been turned off. for lead (Pb) is added if the battery
Indoor use only. contains more than 0.004% lead. By
ensuring that these products and
For product with CE marking batteries are disposed of correctly, you
will help to prevent potentially
The validity of the CE marking is
negative consequences for the
restricted to only those countries
environment and human health which
where it is legally enforced, mainly in
could be caused by inappropriate
the countries EEA (European Economic
waste handling. The recycling of the
Area).
materials will help to conserve natural
CAUTION resources. In case of products that for
Risk of explosion if the battery is safety, performance or data integrity
replaced by an incorrect type. reasons require a permanent
connection with an incorporated
Do not expose batteries or appliances battery, this battery should be replaced
with battery-installed to excessive by qualified service staff only. To
heat, such as sunshine and fire. ensure that the battery and the
electrical and electronic equipment
CAUTION
will be treated properly, hand over
The use of optical instruments with these products at end-of-life to the
this product will increase eye hazard. appropriate collection point for the
recycling of electrical and electronic
2GB
equipment. For all other batteries, You can check the software version
please view the section on how to by pressing OPTIONS, then select
remove the battery from the product “SYSTEM” – “VERSION” using / and
safely. Hand the battery over to the .
appropriate collection point for the
recycling of waste batteries. For more This equipment has been tested
detailed information about recycling of and found to comply with the limits
this product or battery, please contact set out in the EMC regulation using
your local Civic Office, your household a connection cable shorter than
waste disposal service or the shop 3 meters.
where you purchased the product or
battery. This Home Audio System is designed
to be used for the following purposes:
Notice for customers: the •• Playing back music/video sources
following information is only on discs or USB devices
applicable to equipment sold •• Transferring music to USB devices
in countries applying EU •• Listening to radio stations
•• Listening to TV sound
directives.
•• Playing back music sources on
This product has been manufactured
BLUETOOTH devices
by or on behalf of Sony Corporation.
EU Importer: Sony Europe Limited. •• Enjoying social gatherings with the
Inquiries to the EU Importer or related Wired Party Chain and Wireless
to product compliance in Europe Party Chain functions
should be sent to the manufacturer’s
authorized representative, Sony For customers in Australia and
Belgium, bijkantoor van Sony Europe India
Limited, Da Vincilaan 7-D1, 1935
Zaventem, Belgium.
Disposal of old
Hereby, Sony Corporation declares that electrical &
this equipment is in compliance with electronic
Directive 2014/53/EU.
The full text of the EU declaration of
equipment
conformity is available at the following (applicable in the
internet address: European Union and
http://www.compliance.sony.de/ other countries with
separate collection
systems)
This radio equipment is intended to
be used with the approved version(s)
of software that are indicated in
the EU Declaration of Conformity.
The software loaded on this radio
equipment is verified to comply with
the essential requirements of the
Directive 2014/53/EU.
3GB
For customers in the United •• This system incorporates Dolby*
Arab Emirates Digital.
* Manufactured under license from
Dolby Laboratories. Dolby, Dolby
Audio, and the double-D symbol are
trademarks of Dolby Laboratories.
•• This system incorporates High-
This appliance is classified as a CLASS 1 Definition Multimedia Interface
LASER product under IEC 60825-1:2007. (HDMI™) technology. The terms
This marking is located on the rear HDMI and HDMI High-Definition
exterior. Multimedia Interface, and the HDMI
Logo are trademarks or registered
trademarks of HDMI Licensing
Administrator, Inc. in the United
States and other countries.
•• “BRAVIA” is a trademark of Sony
Corporation.
•• LDAC™ and LDAC logo are
trademarks of Sony Corporation.
•• The BLUETOOTH® word mark and
logos are registered trademarks
License and Trademark Notice owned by the Bluetooth SIG, Inc.
•• is a trademark of DVD Format/ and any use of such marks by Sony
Logo Licensing Corporation. Corporation is under license. Other
•• “DVD+RW”, “DVD-RW”, “DVD+R”, trademarks and trade names are
“DVD-R”, “DVD VIDEO”, and the “CD” those of their respective owners.
logos are trademarks. •• The N-Mark is a trademark or
•• WALKMAN® and WALKMAN® logo registered trademark of NFC Forum,
are registered trademarks of Sony Inc. in the United States and in other
Corporation. countries.
•• MPEG Layer-3 audio coding •• Android, Google Play, and the
technology and patents licensed Google Play logo are trademarks of
from Fraunhofer IIS and Thomson. Google LLC.
•• Windows Media is either a •• Apple, iPhone, iPod touch, and
registered trademark or trademark Siri are trademarks of Apple Inc.,
of Microsoft Corporation in registered in the U.S. and other
the United States and/or other countries. App Store is a service
countries. mark of Apple Inc., registered in the
•• This product is protected by U.S. and other countries.
certain intellectual property rights
of Microsoft Corporation. Use or
distribution of such technology
outside of this product is prohibited
without a license from Microsoft or
an authorized Microsoft subsidiary.
4GB
•• Use of the Made for Apple badge
means that an accessory has been About this manual
designed to connect specifically to
the Apple product(s) identified in •• The instructions in this manual
the badge, and has been certified are for models MHC-V81D and
by the developer to meet Apple MHC-V71D. In this manual, the
performance standards. Apple is not MHC-V81D is used for illustration
responsible for the operation of this purpose unless stated otherwise.
device or its compliance with safety •• This manual mainly explains
and regulatory standards.
operations using the remote
•• THIS PRODUCT IS LICENSED UNDER
control, but the same operations
THE MPEG-4 VISUAL PATENT
can also be performed using the
PORTFOLIO LICENSE FOR THE
keys on the touch panel of the unit
PERSONAL AND NON-COMMERCIAL
USE OF A CONSUMER FOR
having the same or similar names.
•• Icons, such as , listed at the
(i) ENCODING VIDEO IN top of each explanation indicate
COMPLIANCE WITH THE MPEG-4 the type of media that can be used
VISUAL STANDARD (“MPEG-4 with the function being explained.
VIDEO”) •• Some illustrations are presented
AND/OR as conceptual drawings, and
may be different from the actual
(ii) DECODING MPEG-4 VIDEO THAT
products.
WAS ENCODED BY A CONSUMER
•• The items displayed on the TV
ENGAGED IN A PERSONAL AND
NON-COMMERCIAL ACTIVITY screen may vary depending on
AND/OR WAS OBTAINED FROM the area.
A VIDEO PROVIDER LICENSED TO •• The default setting is underlined.
PROVIDE MPEG-4 VIDEO. •• The text enclosed in bracket ([--])
5GB
Table of Contents
8GB
*4 A logical format of files and folders —
—Files with DRM (Digital Rights
on CD-ROMs, defined by ISO Management) copyright
(International Organization for protection.
Standardization). —
—Some Xvid files that are longer
than 2 hours.
Discs/files that cannot be played •• The MP3 PRO audio file can be
back played back as MP3 file.
•• You cannot play back the •• The system may not play back an
following discs Xvid file when the file has been
—
—BDs (Blu-ray Discs) combined from two or more Xvid
—
—CD-ROMs recorded in PHOTO CD files.
format
* Mixed Mode CD: This format records
—
—Data part of CD-Extra or Mixed data on the first track and audio (AUDIO
Mode CDs* CD data) on the second and subsequent
— Graphics disc
—CD tracks of a session.
—
—Super Audio CDs
—
—DVD Audio Notes on CD-R/-RW and
—
—DATA CD/DATA DVD that is DVD-R/-RW/+R/+RW
created in Packet Write format •• In some cases, a CD-R/-RW and
—
—DVD-RAM
DVD-R/-RW/+R/+RW cannot
—
—DATA CD/DATA DVD which has be played back on this system
not been correctly finalized due to the recording quality or
—
—CPRM (Content Protection for physical condition of the disc, or
Recordable Media) compatible the characteristics of the recording
DVD-R/-RW recorded in Copy- device and authoring software.
Once programs For more information, refer to
—A— disc that has a non-standard
the operating instructions of the
shape (e.g., heart, square, star) recording device.
—A— disc that has adhesive tape, •• Some playback functions may not
paper, or a sticker attached to it work with some DVD+Rs/+RWs,
•• You cannot play back the
even if they have been correctly
following files finalized. In this case, view the disc
—
—The video files which is larger by normal playback.
than 720 (width) × 576 (height)
pixels. Notes on discs
—
—The video files with a high width
•• This product is designed to play
to length ratio.
—A— WMA file in WMA DRM, WMA back discs that conform to the
Compact Disc (CD) standard.
Lossless, or WMA PRO format.
•• DualDisc and some music discs
— AAC file in AAC DRM or AAC
—An
encoded with copyright protection
Lossless format.
—
—The technologies do not conform to
AAC files which is encoded
the CD standard. Therefore, these
at 96 kHz.
—
—Files discs may not be compatible with
that are encrypted or
this product.
protected by passwords.
9GB
Note on multisession disc •• The playback order may not be
This system can play back applicable depending on the
continuous sessions on a disc when software used for creating the
they are recorded in the same audio file or video file.
format as the first session. However, •• Compatibility with all encoding/
the playback is not guaranteed. writing software of the supported
formats, recording devices,
Note on DVD VIDEO and VIDEO and recording media cannot be
CD playback operations guaranteed.
•• Depending on the Xvid file, the
Some playback operations for
picture may be unclear or the
a DVD VIDEO or VIDEO CD may
sound may skip.
be intentionally restricted by
software producers. Therefore,
some playback features may not
Notes about USB devices
•• This system is not guaranteed to
be available. Be sure to read the
operating instructions of the DVD operate with all USB devices.
•• Although there are a variety
VIDEO or VIDEO CD.
of complex functions for USB
Notes on playable files devices, the playable contents
•• Playback may take a longer time
of USB devices connected to
the system are music and video
to start when:
—a— DATA CD/DATA DVD/USB contents only. For details, refer to
the operating instructions of the
device is recorded with a
USB device.
complicated tree structure.
•• When a USB device is inserted,
— audio files or video files in
—the
the system reads all the files on
another folder have just been
the USB device. If there are many
played back.
•• The system can play back a DATA
folders or files on the USB device,
it may take a long time to finish
CD/DATA DVD or a USB device in
reading the USB device.
the following conditions:
•• Do not connect the system and
— to a depth of 8 folders
—up
— to 300 folders
—up the USB device through a USB hub.
•• With some connected USB
— to 999 files in a disc
—up
— to 2,000 files in a USB device
—up devices, there may be a delay
— to 650 files in a folder
—up before an operation is performed
by this system.
These numbers may vary
•• The playback order for the system
depending on the file or folder
may differ from the playback order
configuration.
•• Folders that have no audio files or
of the connected USB device.
•• Before using a USB device, make
video files are skipped.
•• Files transferred by a device such
sure that no virus-ridden files are
on the USB device.
as a computer may not be played
back in the order in which they
were transferred.
10GB
Websites for
compatible devices
Check the websites below for the
latest information about compatible
USB and BLUETOOTH devices.
For customers in Latin America:
<http://esupport.sony.com/LA>
For customers in Europe and
Russia:
<http://www.sony.eu/support>
For customers in other countries/
regions:
<http://www.sony-asia.com/
support>
11GB
Guide to parts and controls
You can lock the keys except (power) on the unit to prevent them from
being operated by mistake (page 66).
Unit
Top
Front Rear
12GB
(power) button MEGA BASS indicator
Press to turn on the system, or Lights up when MEGA BASS
set it to standby mode. sound effect is selected.
13GB
VOCAL FADER key Party Light (page 65)
(page 62) Do not look directly at the light-
emitting part when the Party
MIC ECHO key (page 62)
Light is turned on.
MIC/GUITAR LEVEL +/– key Side protector (MHC-V81D
(page 61, 63) only) (page 19)
(open/close) key
Touch to open or close the disc
tray.
Built-in microphone
(page 60)
14GB
Remote control MEGA BASS button
(page 49)
16GB
Getting Started
Getting Started
Note
The jacks/terminal at the rear panel have cover, open the cover then make the
connection.
17GB
Audio input and output jacks AC power cord (mains lead)
Use an audio cable (not supplied) Connect the AC power cord
to make either connection as (mains lead) (supplied) to the
follows: unit, then to the wall outlet.
•• AUDIO/PARTY CHAIN OUT
L/R jacks
—
—Connect to the audio
input jacks of an optional
To wall
equipment. outlet
—
—Connect to another audio
system to enjoy the Wired The demonstration (page 23)
Party Chain function starts automatically. If you press
(page 53). (power) to turn on the system,
•• AUDIO/PARTY CHAIN IN (TV) the demonstration ends.
L/R jacks
—
—Connect to the audio output
jacks of a TV or an audio/
video equipment. The Deactivating the
sound is output through this
system.
demonstration
—
—Connect to another audio
To deactivate the demonstration
system to enjoy the Wired
while the system is turned off, press
Party Chain function
DISPLAY repeatedly to select the no
(page 53).
display mode (Power Saving Mode)
(page 23).
VIDEO OUT jack
Use a video cable (not supplied)
to connect to the video input jack
of a TV or projector (page 20). Inserting batteries
Note Insert the two supplied R03 (size
Do not connect this system to the TV AAA) batteries, matching the
through the video deck. polarities shown below.
18GB
Note 1 Align the top hook and the
•• Do not mix an old battery with a new bottom hook with the holes on
one or mix different types of batteries. the unit, then slightly push until
•• If you do not use the remote control both hooks slot into the holes.
for a long period of time, remove the
batteries to avoid damage from battery Top hook
leakage and corrosion.
Bottom
To operate the system using the hook
remote control Side protector
Point the remote control at the unit’s (inner view)
Getting Started
remote control sensor.
Side
protector
Top hook
Hole
Bottom
hook
Unit
Note
Exercise extreme caution when installing
the side protector. Dropping the unit may
cause personal injury and/or property
damage.
19GB
Connecting the TV
Before connecting cables, be sure to disconnect the AC power cord (mains
lead).
To watch video
Select the connection methods according to the jacks on your TV.
HDMI IN (ARC)*
or
HDMI IN
* You can listen to TV sound via the system if you connect the system to the TV’s HDMI
IN (ARC) jack. The Audio Return Channel (ARC) function enables the TV to output
sound through the system with an HDMI connection, without performing an audio
connection (connection below). To set the ARC function on this system, see
[AUDIO RETURN CHANNEL] (page 34). To check the compatibility of your TV’s ARC
function, refer to the operating instructions supplied with your TV.
20GB
To listen to TV sound via the system
Choose one of the connections below ( or ).
AUDIO OUT
HDMI IN (ARC)
Getting Started
To listen to TV sound, press FUNCTION repeatedly to select “TV”.
Hint
•• You can also enjoy the sound of external equipment (DVD players, etc.) via the system
by connecting to the AUDIO/PARTY CHAIN IN (TV) L/R jack as connection above. For
details, refer to the operating instructions of your equipment.
•• If the audio output level from the system is low when connecting the external
equipment, try adjusting the audio output settings on the connected equipment. It
may improve the audio output level. For details, refer to the operating instructions of
your equipment.
If “CODE 01” and “SGNL ERR” appear on the display of the unit
When the audio input signals to the system are other than 2-channel
Linear PCM signals, the messages “CODE 01” and “SGNL ERR” (indicate that
the input audio signals are unsupported) appear on the display of the unit.
In this case, select the proper audio output mode on the TV in order
to output 2-channel Linear PCM audio signals. For details, refer to the
operating instructions of your TV.
21GB
Carrying the unit Changing the color
The unit has caster wheels so that system
you can roll it easily. Normally, (Except for Latin American,
carrying the unit by this method is European, and Russian models)
recommended on flat surfaces.
Before carrying the unit, disconnect Set the color system to PAL or NTSC
all the cables. depending on the color system of
your TV.
Each time you perform the
procedure below, the color system
changes as follows:
NTSC PAL
Use the keys on the touch panel of
the unit to perform this operation.
22GB
3 Press FUNCTION repeatedly to
select “DVD/CD”. Changing the display
The guide message [Press ENTER to
run QUICK SETUP.] appears at the
mode
bottom of the TV screen.
Press DISPLAY repeatedly while
4 Press without loading a disc. the system is turned off.
[LANGUAGE SETUP] appears on the Each time you press the button, the
TV screen. Displayed items may vary display mode changes as follows.
depending on country or region.
Demonstration
Getting Started
LANGUAGE SETUP
OSD : ENGLISH The messages about the main
MENU :
AUDIO:
ENGLISH
CHINESE 1
features of this system scrolls across
SUBTITLE: CHINESE 2
THAI
the display and the illumination
turns on.
To turn off the illumination, press
PARTY LIGHT.
5 Press / repeatedly to select a No display (Power Saving Mode)
language, then press . The display and the illumination are
[VIDEO SETUP] appears on the TV turned off to conserve power.
screen.
Note
The guide message appears when you
turn on the system for the first time or
after performing [RESET] (see “Returning
the setup menu settings to the default”
on page 76).
23GB
Touch on the unit again to close
Disc/USB Playback the disc tray.
Do not forcibly push the disc tray to
Before using the USB close it as this may cause a
malfunction.
device For USB function:
For compatible USB devices, see Push to open the USB/MIC cover,
“Websites for compatible devices” then connect a USB device to the
(page 11). (USB) port.
(You can use your iPhone/iPod
Note
with this system via BLUETOOTH
You can use a USB adaptor (not
connection only.)
supplied) to connect the USB device
to the unit if the USB device cannot be
plugged into the (USB) port.
Basic playback 3 ( only)
Press MEDIA MODE repeatedly
to select the media type
1 Press FUNCTION repeatedly to ([MUSIC]/[VIDEO]) you want.
select “DVD/CD” or “USB”.
4 Press to start playback.
2 Prepare the playback source.
Other operations
For DVD/CD function:
Touch on the unit to open the To Do this
disc tray and load a disc with the Stop playback Press .
label facing up on the disc tray.
Pause Press .
playback
Resume Press .
playback or
return to
normal
playback
Cancel the Press twice.
resume point
When you play back an 8 cm disc
such as a CD single, place it on Select a track, Press or
the inner circle of the tray. file, chapter or during playback.
scene Or, hold down SHIFT
and press the numeric
buttons, then
press .
(Operation might be
prohibited by disc or
USB device.)
24GB
To use the Gesture Control To Do this
during playback View folder list Press SEARCH.
See “Using the Gesture Control or file list Press SEARCH again to
during playback” (page 47). turn off the folder list
or file list.
To play from a specific file Return to Press RETURN.
folder list when
1 Press MEDIA MODE repeatedly to in file list
select [MUSIC] or [VIDEO].
Locate a point Press or
2 Press SEARCH to display the quickly in fast during playback.
folder list. forward or fast Each time you press
reverse (Lock or , the
Disc/USB Playback
Search) playback speed
changes.
Watch frame Press , then press
by frame or .
(Slow-motion Each time you press
Play) or , the playback
speed changes.
3 Press / repeatedly to select
the folder you want.
Searching a specific track
4 Press to display the file list.
To Do this
View DVD Press DVD/TUNER
menu MENU.
25GB
To search using the DVD menu
Searching a specific title/
chapter/scene/track/index
1 Press DVD/TUNER MENU.
2 Press / / / , or hold down
1 Press SEARCH repeatedly during SHIFT and press the numeric
playback to select the search buttons, to select the title or item
mode. you want to play back, then
press .
2 Hold down SHIFT and press the
numeric buttons to enter the
title, chapter, scene, track, or Changing the camera angles
index number you want, then
press .
Playback starts.
Press ANGLE repeatedly during
Note playback to select the camera
•• For VIDEO CD with PBC playback, press angle you want.
SEARCH to search the scene.
•• For VIDEO CD without PBC playback,
press SEARCH to search the track and Selecting the subtitle setting
index.
26GB
When 4 digits are displayed, they 2 Hold down SHIFT and press the
indicate a language code. See numeric buttons to select the
“Language code list” (page 84) item number you want, then
to confirm which language the press .
code represents. When the same
language is displayed two or more 3 Continue playback according to
times, the DVD VIDEO is recorded in the instructions on the menu.
multiple audio formats.
Note
VIDEO CD/AUDIO CD/audio file PBC playback is canceled when Repeat
Play is activated.
You can change the sound output.
•• [STEREO]: The stereo sound.
•• [1/L]/[2/R]: The monaural sound
To cancel PBC playback
Disc/USB Playback
of the left or right channel. 1 Press or , or hold down
SHIFT and press the numeric
SUPER VIDEO CD buttons, to select a track when
•• [1:STEREO]: The stereo sound of playback is stopped.
audio track 1.
•• [1:1/L]/[1:2/R]: The monaural 2 Press or .
sound of the left or right channel Playback starts from the selected
of audio track 1. track.
•• [2:STEREO]: The stereo sound of
audio track 2. To return to PBC playback
•• [2:1/L]/[2:2/R]: The monaural Press twice, then press .
sound of the left or right channel
of audio track 2.
Multi-disc resume play
Playing a VIDEO CD with PBC
functions This system can store playback
resume points for up to 6 discs and
resumes playback when you insert
You can use the PBC (Playback the same disc again. If you store a
Control) menu to enjoy the playback resume point for the 7th
interactive features of VIDEO CD disc, the resume point for the first
(VIDEO CD Version 2.0 and Super disc will be deleted.
VCD). To activate this function, set [MULTI-
DISC RESUME] in [SYSTEM SETUP] to
1 Press to play a VIDEO CD [ON] (page 34).
with PBC functions. Note
The PBC menu appears on the TV To play back from the beginning of the
screen. disc, press twice, then press .
27GB
* Cannot be selected for AUDIO CD.
Using play mode When playing a USB device
•• [ONE USB DEVICE (SHUFFLE)]:
28GB
To cancel Repeat Play 4 Hold down SHIFT and press the
Press REPEAT repeatedly to select numeric buttons to enter or
[OFF]. re-enter your 4-digit password,
then press .
Note
•• “ ” lights up on the display when 5 Press/ repeatedly to select
Repeat Play is set to [ALL] or [DISC]. [STANDARD], then press .
•• “ ” lights up on the display when
Repeat Play is set to [TITLE], [CHAPTER], 6 Press / repeatedly to select a
[TRACK] or [FILE]. geographic area as the playback
•• You cannot perform Repeat Play with
limitation level, then press .
VIDEO CD during PBC playback.
•• Depending on the DVD VIDEO, you The area is selected.
cannot perform Repeat Play. When you select [OTHERS], enter
Disc/USB Playback
•• Repeat Play is canceled when you: the area code for the geographic
—— open the disc tray. area you want according to the
—— turn off the system (DVD VIDEO and “Parental Control area code list”
VIDEO CD only). (page 85) by holding down SHIFT
—— change the function (DVD VIDEO and and press the numeric buttons.
VIDEO CD only).
—— perform Synchronized Transfer.
—— change Media Mode.
7 Press / repeatedly to select
[LEVEL], then press .
29GB
If you forget your password Artist name*1*2
Remove the disc and repeat steps 1 Appears when playing an audio
to 3 of “Restricting playback of the file.
disc (Parental Control)” (page 29). *1 If an audio file has an ID3 tag, the
Hold down SHIFT and press system will display an album name/
the numeric buttons to enter a title name/artist name from the ID3 tag
password “199703”, then press . information. The system can support
Follow the on-screen instructions ID3 ver 1.0/1.1/2.2/2.3.
2
* If the name contains characters which
and enter a new 4-digit password.
Then, reload the disc and press . cannot be displayed, those characters
will be displayed as “_”.
You need to enter your new
password again. Note
•• Depending on the source being played,
—— some information may not be
Viewing information of displayed.
—— some characters cannot be
a disc and USB device displayed.
•• Depending on the play mode, the
information displayed may be different.
Note [MENU]
Playback settings stored in the disc take
priority over the setup menu settings. Sets the language for the DVD
Therefore, some of the setup menu menu.
settings may not be performed.
[AUDIO]
Disc/USB Playback
1 When playback is stopped in
DVD/CD or USB function, hold Switches the language of the sound
down SHIFT and press SETUP. track.
The setup menu appears on the TV When you select [ORIGINAL], the
screen. language given priority in the disc is
selected.
2 Press / repeatedly to select
[SUBTITLE]
[LANGUAGE SETUP], [VIDEO
SETUP], [AUDIO SETUP],
Switches the language of the
[SYSTEM SETUP] or [HDMI
subtitle recorded in the DVD VIDEO.
SETUP], then press .
When you select [AUDIO FOLLOW],
3 Press / repeatedly to select the language for the subtitles
changes according to the language
the item you want, then press
you selected for the sound track.
.
31GB
[NORMAL]: Changes the picture
S etting the TV screen size to fit the screen size with the
– [VIDEO SETUP] original picture aspect ratio. This
setting displays black bands on the
[TV TYPE] left and right side if you display a 4:3
screen picture.
[16:9]: Selects this when you
connect a wide-screen TV or a TV
with a wide-mode function.
32GB
[FRAME]: The picture, including [DOLBY SURROUND]: Outputs
subjects that do not move multi-channel audio into a
dynamically, is output in high 2-channel surround signal.
resolution.
Note
This function only works for the HDMI
OUT (TV) ARC jack.
Disc/USB Playback
[SCREEN SAVER]
Useful for watching movies at low
The screen saver will help prevent
volume late at night.
your display device from becoming
[OFF]: Off.
damaged (ghosting). Press +/– to
[STANDARD]: The dynamic range
exit the screen saver.
is compressed as intended by the
[ON]: The screen saver image
recording engineer.
appears if you do not operate the
[TRACK SELECTION] system for about 15 minutes.
[OFF]: Turns off the function. The
Gives priority to the sound track screen saver image does not appear.
which contains the highest number [BACKGROUND]
of channels when you play back a Selects the background color or
DVD VIDEO on which multiple audio picture to be displayed on the TV
formats (PCM, MPEG audio, or Dolby screen.
Digital) are recorded. [JACKET PICTURE]: The jacket
[OFF]: No priority given. picture (still picture) recorded on the
[AUTO]: Priority given. disc appears in the background.
[A/V SYNC] [GRAPHICS]: A preset picture
stored in the system appears in the
background.
(Video files only)
[BLUE]: The background color is
[OFF]: Does not adjust.
blue.
[ON]: Adjusts the delay between
[BLACK]: The background color is
picture and sound when the sound
black.
does not synchronize with the
displayed picture. [PARENTAL CONTROL]
[DOWNMIX] Sets the playback restrictions. For
details, see “Restricting playback
of the disc (Parental Control)”
Selects the audio output signal for
(page 29).
playing a multi-channel audio.
[NORMAL]: Outputs multi-channel
audio into a 2-channel stereo signal.
33GB
[MULTI-DISC RESUME] [CONTROL FOR HDMI]
[ON]: The Control for HDMI function
[ON]: Stores the resume playback is enabled. You can operate
point in the memory for up to mutually between system and TV
6 discs. connected with an HDMI cable.
[OFF]: Playback starts at the resume [OFF]: Off.
playback point only for the current
disc in the system. [AUDIO RETURN CHANNEL]
Set this function when the system
[RESET] is connected to a TV’s HDMI IN jack
Returns the setup menu settings to that is compatible with Audio Return
the default settings. For details, see Channel. This function is available
“Returning the setup menu settings when you set [CONTROL FOR HDMI]
to the default” (page 76). to [ON].
[ON]: You can listen to TV sound
from the speakers of the system.
[OFF]: Off.
S etting the HDMI options [STANDBY LINKED TO TV]
– [HDMI SETUP] This function is available when you
set [CONTROL FOR HDMI] to [ON].
[HDMI RESOLUTION]
[AUTO]: When you turn off the TV,
Selects the TV output resolution the system turns off automatically in
when the TV is connected via HDMI the following conditions:
cable. —
—while playing video in DVD/CD or
[AUTO(1920×1080p)]: Outputs USB function
video signals according to the —
—when the audio playback is
resolution of the TV. stopped in DVD/CD or USB
[1920×1080i]/[1280×720p]/ function
[720×480p]*1/[720×480/576p]*2: —
—when TV function is selected
Outputs video signals according to [ON]: The system turns off
the selected resolution setting. automatically when you turn off the
*1 For Latin American models only. TV regardless of the function.
*2 For other models. [OFF]: The system does not turn off
when you turn off the TV.
[YCBCR/RGB(HDMI)]
[YCBCR]: Outputs YCBCR video
signals.
[RGB]: Outputs RGB video signals.
[AUDIO(HDMI)]
[AUTO]: Outputs audio signals in
original format from HDMI OUT (TV)
ARC jack.
[PCM]: Outputs 2-channel Linear
PCM signals from HDMI OUT (TV)
ARC jack.
34GB
2 Press / repeatedly to select
USB Transfer “BIT RATE”, then press .
3 Press / repeatedly to select
Before using the USB the bit rate you want, then press
device .
•• “128 KBPS”: encoded MP3 files
For compatible USB devices, see have smaller file size and lower
“Websites for compatible devices” audio quality.
(page 11). •• “256 KBPS”: encoded MP3 files
(You can use your iPhone/iPod have bigger file size but higher
with this system via BLUETOOTH audio quality.
connection only.) To exit the options menu, press
OPTIONS.
Transferring music
USB Transfer
Transferring music from a disc
You can transfer music from a disc You can transfer music to a USB
(AUDIO CD or MP3 disc only) to a device connected to (USB) port as
USB device connected to the (USB) follows:
port. •• Synchronized Transfer: Transfer
all tracks or MP3 files from a disc
The audio format of files transferred
to USB.
by this system is MP3.
•• REC1 Transfer: Transfer a single
Note track or MP3 file during playback.
5 Press
•• When connecting a WALKMAN® to the
. system, be sure to connect after the
The transfer starts, then “DO NOT display “Creating Library” or “Creating
REMOVE” appears on the display. Database” on the WALKMAN® has
Do not remove the USB device until disappeared.
the transfer is complete.
When the transfer is complete, the
system performs as follows:
Folder and file generation
rules
Synchronized Transfer:
The disc stops automatically. Maximum number of MP3 files
REC1 Transfer: that can be generated
The disc continues to play the next •• 298 folders
track or file. •• 650 files in a folder
•• 650 files in REC1-CD or REC1-MP3
To stop transfer folder.
Press . These numbers may vary depending
on the file or folder configuration.
Notes on transfer When transferring to a USB device,
•• You cannot transfer MP3 files on a UDF
a “MUSIC” folder is created directly
(Universal Disk Format) formatted disc
below “ROOT”. Folders and files are
to the USB device.
•• While transferring, no sound is output.
generated within this “MUSIC” folder
•• CD-TEXT information is not transferred according to the transfer method
to the created MP3 files. and source as follows:
36GB
Synchronized Transfer 5 Press / repeatedly to select a
folder, then press .
When transferring all tracks The file list is displayed on the TV
from an AUDIO CD screen.
Folder name: “CDDA0001”*
File name: “TRACK001”* 6 Press / repeatedly to select
an audio file you want to erase,
When transferring MP3 files
then press .
from a disc
If you want to erase all the audio
Folder name: Same as the source files in the folder, select [ALL
File name: Same as the source TRACKS] on the list.
REC1 Transfer “FOLDER ERASE” or “TRACK ERASE”
and “PUSH ENTER” appear on the
When transferring a track from display.
an AUDIO CD To cancel erase operations, press .
USB Transfer
Folder name: “REC1-CD”
File name: “TRACK001”* 7 Press .
“COMPLETE” appears on the display.
When transferring an MP3 file To exit the options menu, press
from a disc OPTIONS.
Folder name: “REC1-MP3”
File name: Same as the source Note
•• You can erase the supported audio file,
* Folder and file numbers are assigned MP4 format file, and 3GP format file
serially thereafter. only.
•• You cannot erase audio files or folders
when Shuffle Play has been selected.
Erasing audio files or folders Set the play mode to Normal Play
on the USB device before erasing.
•• Erase operation is prohibited when the
disc tray is opened.
1 Press FUNCTION repeatedly to
select “USB”.
37GB
Tuner Presetting radio stations
Hint
To reduce static noise on a weak FM
stereo station, press FM MODE repeatedly
until “ST” disappears from the display. You
will lose the stereo effect, but reception
will improve.
38GB
BLUETOOTH Connection Pairing this system
About the BLUETOOTH with a BLUETOOTH
wireless technology device
Pairing is an operation where
BLUETOOTH wireless technology is BLUETOOTH devices register with
a short-range wireless technology each other beforehand. Once a
that enables wireless data pairing operation is performed, it
communication between digital does not need to be performed
devices. again.
If your device is an NFC-compatible
Supported BLUETOOTH version, BLUETOOOTH device, the manual
profiles and codecs pairing procedure is not necessary.
For details, see “BLUETOOTH (See “One Touch BLUETOOTH
section” (page 82). Connection by NFC” (page 42).)
39GB
4 Turn on the BLUETOOTH To cancel the pairing operation
function on the BLUETOOTH Touch and hold PAIRING on the
device and perform the pairing unit for 2 seconds or more until “BT
procedure. AUDIO” appears on the display.
For details, refer to the operating
instructions of your BLUETOOTH To erase pairing information
device. You can erase all pairing information
by resetting the system. See “Resetting
5 Select the system’s name (for the system” (page 76).
example, “MHC-V81D”) on the
display of the BLUETOOTH Note
device. After you reset the system, it may not be
able to connect with your iPhone/iPod. In
Perform this step within 5 minutes,
this case, delete the pairing information
otherwise pairing will be canceled.
of the system on your iPhone/iPod, then
In this case, repeat from step 3. perform the pairing operation again.
Note
If passkey is required on the
BLUETOOTH device, enter “0000”. Listening to music on a
“Passkey” may be called “Passcode”,
“PIN code”, “PIN number”, or BLUETOOTH device
“Password”.
You can listen to music on the
6 Establish connection with the BLUETOOTH device and control the
BLUETOOTH device. playback using the keys on the unit
When pairing is completed and the or the remote control.
BLUETOOTH connection is Check the following before playing
established, BLUETOOTH device music:
name appears on the display.
—
—The BLUETOOTH function of the
Depending on the BLUETOOTH
BLUETOOTH device is turned on.
device, connection may start
—
—Pairing has been completed
automatically after pairing is
completed. (page 39).
Once the system and the
You can check the BLUETOOTH
BLUETOOTH device are connected,
device address by pressing DISPLAY
repeatedly. you can control playback by
pressing , , , / and
Note /.
•• You can pair up to 8 BLUETOOTH
devices. If the 9th BLUETOOTH device is 1 Touch BLUETOOTH on the unit to
paired, the oldest paired device will be select the BLUETOOTH function.
deleted. “BLUETOOTH” appears on the
•• If you want to pair with another
display.
BLUETOOTH device, repeat steps 1 to 6.
40GB
2 Establish connection with the
BLUETOOTH device. Connecting this system
Touch BLUETOOTH on the unit to
connect to the last connected
with multiple
BLUETOOTH device. BLUETOOTH devices
Perform the BLUETOOTH connection
from the BLUETOOTH device if the (Multi-device
device is not connected.
Once the connection is established, connection)
the BLUETOOTH device name You can connect up to three
appears on the display. BLUETOOTH devices to the system
at the same time with A2DP/AVRCP
3 Touch to start playback. connection.
Depending on the BLUETOOTH Before pairing the next BLUETOOTH
device, device, be sure that the BLUETOOTH
——you may need to touch twice. function on the system is turned on
——you may need to start playing an and the first BLUETOOTH device is
audio source on the BLUETOOTH connected to the system.
device.
To pair with the second or third
4 Adjust the volume.
BLUETOOTH Connection
device
Adjust the volume of the
Repeat steps 1 to 6 of “Pairing this
BLUETOOTH device first. If the
volume level is still too low, adjust system with a BLUETOOTH device”
the volume level on the system. (page 39).
device, the BLUETOOTH connection you may not be able to make three
BLUETOOTH connections at the same
may be terminated automatically
time.
when you stop playback.
41GB
•• You cannot establish the multi-device
Note
connection when using the Wireless
Depending on your NFC-compatible
Party Chain function, Speaker Add
BLUETOOTH device, you may need to turn
function or hands-free call function.
on the NFC function in advance.
For details, refer to the operating
To disconnect any BLUETOOTH instructions of the BLUETOOTH device.
device from the multi-device
connection 1 Touch the BLUETOOTH device to
Terminate the BLUETOOTH the N-Mark on the unit until the
connection from the BLUETOOTH BLUETOOTH device responds to
device which you want to the system.
disconnect.
42GB
•• If you change this setting while the
Hint
system is connected to a BLUETOOTH
If pairing and the BLUETOOTH connection
device, the BLUETOOTH device will
fail, do the following.
be disconnected. To connect to the
—— Remove the case from the BLUETOOTH
BLUETOOTH device, perform the
device if using a commercially
BLUETOOTH connection again.
available case.
—— Touch the BLUETOOTH device to the Hint
N-Mark on the unit again.
LDAC is an audio coding technology
developed by Sony that enables the
To terminate the BLUETOOTH transmission of High-Resolution (Hi-Res)
connection Audio content, even over a BLUETOOTH
Touch the BLUETOOTH device to the connection. Unlike other BLUETOOTH
N-Mark on the unit again. compatible coding technologies
such as SBC, it operates without any
down-conversion of the Hi-Res Audio
content*1, and allows approximately
Setting the BLUETOOTH three times more data*2 than those
other technologies to be transmitted
audio codecs over a BLUETOOTH wireless network
with unprecedented sound quality, by
You can enable AAC, LDAC or SBC means of efficient coding and optimized
BLUETOOTH Connection
codec reception from BLUETOOTH packetization.
device. AAC/LDAC can be selected *1 Excluding DSD format contents.
only when the BLUETOOTH device *2 In comparison with SBC (Subband
supports AAC/LDAC. Coding) when the bitrate of 990 kbps
(96/48 kHz) or 909 kbps (88.2/44.1 kHz)
1 Press OPTIONS. is selected.
44GB
3 Connect the system and device 1 Search and download “Sony |
via BLUETOOTH connection Music Center” app on your
(page 39). device (page 44).
BLUETOOTH Connection
Center”, refer to the following URL.
http://info.vssupport.sony.net/help/
Achieving and sharing
•• Specifications and display design of
“Sony | Music Center” are subject to
a Party People ranking
change without notice. and getting bonus
features with Party
Getting frenzied King
parties with the The system has a unique feature
“Fiestable” app that can automatically record your
system usage.
You can control the party features Based on your usage, the system will
of Sony’s Home Audio System with rank you with different Party People
intuitive and fancy user interface ranking according to predefined
with the “Fiestable” app. “Fiestable” criteria. The frequent you use the
allows you to control features system, the higher the ranking you
such as DJ Effect, illumination and will achieve.
Karaoke. You can also enjoy the Once you have achieved a certain
“Motion Control” function where you Party People ranking, you can share
can operate certain features on this your achievement through social
system by shaking your BLUETOOTH media.
device in different directions. The system will also award your
“Fiestable” is a plug-in application of achievements with bonus features.
“Sony | Music Center”.
45GB
Note Gesture Control
To use this feature, make sure “Sony |
Music Center” app (page 44) and
“Fiestable” app (page 45) have been Enjoying the Gesture
installed on your device.
Control
1 Connect the system and device
via BLUETOOTH connection You can control the operations
(page 39). for PLAYBACK, DJ, SAMPLER and
KARAOKE mode by swiping your
2 Launch “Sony | Music Center” hand over the GESTURE CONTROL
and touch the “Fiestable” icon. sensor on the unit.
You can check your current ranking,
bonus features and also find out
how to achieve next ranking.
Note
Do not touch or contact to the GESTURE
CONTROL sensor when you perform the
swiping motion.
46GB
To deactivate the Gesture
Control Creating a party
Touch GESTURE ON/OFF.
The GESTURE CONTROL lights off.
atmosphere (DJ Effect)
Use the keys and GESTURE
CONTROL sensor on the touch panel
Using the Gesture of the unit to perform this operation.
Gesture Control
2 Touch PLAYBACK. Select ISOLATOR*2
The PLAYBACK mode is selected. Select WAH*3
Select PAN*4
3 Touch FUNCTION repeatedly to Increase the level
select the function you want. of the selected
effect
4 Swipe your hand over the Reduce the level
GESTURE CONTROL sensor. of the selected
To Swipe in this
effect
direction *1 Creates a deep flanging effect that
Go backward is similar to the roar of a jet plane.
*2 Isolates a specific frequency band
Go forward
by adjusting the other frequency
Play bands. For example, when you want
Stop to focus on vocals.
*3 Create a special effect of “Wah-
Increase volume
wah” sound by moving the
Reduce volume frequency of a filter up and down
automatically.
*4 Create a feeling that the sound
is moving around the speakers
between left and right channels.
47GB
For SAMPLER mode: —— change the sound field.
—— use the Vocal Fader.
To Swipe in this —— change the key (Key Control).
direction •• If you activate the DJ Effect during
Output “Come transferring, the sound effect will not be
On!” transferred onto the USB device.
Output “Let’s Go!”
Output Reggae
Horn sound effect Using the Gesture
Output Phaser
sound effect
Control during Karaoke
Output Scratch function
sound effect
Output Audience Use the keys and GESTURE
sound effect CONTROL sensor on the touch panel
of the unit to perform this operation.
Sound Adjustment
field +/– (or touch football match broadcast.
•• If you hear unnatural sounds in the
SOUND FIELD on the
content when “OFF NARRATION”
unit) repeatedly to
is selected, “ON NARRATION” is
select the sound
recommended.
field you want. •• This feature does not support monaural
To cancel, press sound.
SOUND FIELD +/–
(or touch SOUND
FIELD on the unit)
repeatedly to select Creating your own
“FLAT”.
sound effect
You can raise or lower the levels
Selecting the Virtual of specific frequency bands, then
store the setting in the memory as
Football mode “CUSTOM EQ”.
49GB
3 Press / repeatedly to adjust
Other Operations
the equalizer level or surround
setting, then press .
Using the Control for
4 Repeat step 3 to adjust the level
of other frequency bands and HDMI function
surround effect.
To exit the options menu, press Connecting a TV compatible with
OPTIONS. the Control for HDMI function* by
HDMI cable (High Speed HDMI Cable
To select the custom equalizer with Ethernet, not supplied) enables
setting you to easily operate the device by a
TV remote control.
Press SOUND FIELD +/– repeatedly
The following functions can be used
to select “CUSTOM EQ”.
with the Control for HDMI function.
•• System Power Off function
•• System Audio Control function
•• Audio Return Channel
•• One-Touch Play function
•• Remote Easy Control
•• Language Follow
* Control for HDMI is a standard used
by CEC (Consumer Electronics Control)
for allowing HDMI (High-Definition
Multimedia Interface) devices to control
each other.
Note
These functions may work with devices
other than those manufactured by Sony,
but operation is not guaranteed.
50GB
Hint Audio Return Channel
If you enable the Control for HDMI If the system is connected to a TV’s
(“BRAVIA” sync) function when using a HDMI IN jack compatible with Audio
TV manufactured by Sony, the Control Return Channel, you can listen to
for HDMI function of the system is also TV sound from the speakers of the
enabled automatically. When settings are system without connecting an audio
completed, “COMPLETE” appears on the
cable (not supplied).
display.
Hold down SHIFT and press SETUP,
then set [HDMI SETUP] – [AUDIO
System Power Off function
RETURN CHANNEL] to [ON]
When you turn off the TV, the system (page 34). The default setting is
will turn off automatically. [ON].
Hold down SHIFT and press SETUP,
then set [HDMI SETUP] – [STANDBY Note
LINKED TO TV] on the system to [ON] If the TV is not compatible with Audio
or [AUTO] (page 34). The default Return Channel, an audio cable (not
setting is [AUTO]. supplied) needs to be connected
(page 21).
Note
The connected device may not turn off One-Touch Play function
depending on the status of the device. When you press in DVD/CD or
USB function, the TV is turned on
System Audio Control function automatically. The TV’s input is
If you turn on the system while you switched to the HDMI input which
are watching the TV, the TV sound the system is connected.
will be output from the speakers
of the system. The volume of the Note
system can be adjusted using the Depending on the TV, the beginning part
Other Operations
TV’s remote control. of content being played may not play
If the TV sound was output from the correctly.
speakers of the system the previous
time you watched the TV, the system Remote Easy Control
will be turned on automatically You can select the system by the
when you turn on the TV again. SYNC MENU button on the TV
Operations can also be made by the remote control and operate the
TV’s menu. For details, refer to the system.
operating instructions of your TV. This function can be used if the TV
supports the link menu. For details,
Note refer to the operating instructions of
•• The system’s volume level is displayed your TV.
on the TV screen depending on the TV.
It may differ from the volume level on
the display.
•• Depending on the settings of the TV,
the System Audio Control function may
not be available. For details, refer to the
operating instructions of your TV.
51GB
Note
•• In the TV’s link menu, the system is
recognized by the TV as “Player”.
•• Some operations may not be available
with some TVs.
Language Follow
When you change the language
for the on-screen display of the
TV, the system’s on-screen display
language is also changed.
52GB
Enjoying wired playback using multiple systems
(Wired Party Chain function)
You can connect multiple audio systems in a chain to create a more
interesting party environment and to produce higher sound output.
An activated system in the chain will be the “Party Host” and share the music.
Other systems will become “Party Guests” and play the same music as that
being played by the “Party Host”.
Set up a Wired Party Chain by connecting all the systems using audio cables
(not supplied).
Before connecting cables, be sure to disconnect the AC power cord (mains
lead).
If all the systems are equipped with Wired Party Chain function
Continue the
connection until
Other Operations
the last system
First system
Second Last system
system
If one of the systems is not equipped with Wired Party Chain
function
Continue the
connection until
the last system
First system
Second Last system*
system
* Connect the system which is not equipped with Wired Party Chain function at the last
system, otherwise the chain will stop at that system. Be sure to select the Audio In
function on this last system.
•• The last system is not connected to the first system.
•• You must select the first system as Party Host so that all systems are playing
the same music when Wired Party Chain function is activated.
54GB
•• The Party Guest continues playing the
Enjoying the Wired Party Chain music source as Party Host even when
you change the function on Party Guest.
1 Plug in the AC power cord However, you can adjust the volume
and change the sound effect on Party
(mains lead) and turn on all the Guest.
systems. •• When you use the microphone or play
the guitar on Party Host, the sound will
2 Adjust the volume on each not be output from Party Guests.
system. •• When one of the systems in the chain
is performing USB transfer, wait for the
3 Activate the Wired Party Chain system to complete or stop the transfer
function on the system to be before you activate the Wired Party
Chain function.
used as the Party Host. •• For detailed operation on other
Example: When using this system systems, refer to the operating
as the Party Host instructions of the systems.
Touch FUNCTION repeatedly on
the unit to select the function To select a new Party Host (when
you want. If you are using all the systems are equipped
connection (page 54), do with the Wired Party Chain
not select the AUDIO IN function. function)
If you select this function, sound
Repeat step 3 of “Enjoying the
cannot be output.
Wired Party Chain” on the system
Start playing the music, then
to be used as a new Party Host. The
touch and hold PARTY CHAIN
on the unit for 2 seconds or
current Party Host becomes Party
more. Guest automatically. All systems
play the same music as that being
“PARTY CHAIN” appears on the
played by the new Party Host.
Other Operations
display. The Party Host starts the
Wired Party Chain, and other Note
systems become Party Guests
•• You can select another system as the
automatically. All systems play the
new Party Host only after the Wired
same music as that being played by
Party Chain function of all the systems
the Party Host.
in the Chain has been activated.
“WIRED P.CHAIN” lights up on the •• If the selected system does not become
display of Party Host and Party a new Party Host after a few seconds,
Guests. repeat step 3 under “Enjoying the Wired
Party Chain”.
Note
•• Depending on the total unit of systems To deactivate the Wired Party
you have connected, Party Guests may
Chain
take some time to start playing the
music. Touch and hold PARTY CHAIN on
•• Changing the volume level and sound the Party Host for 2 seconds or more.
effect on the Party Host will not affect “LEAVE PARTY” appears on the
the output on the Party Guests. display.
55GB
Note
If the Wired Party Chain function is not Enjoying wireless
deactivated after a few seconds, touch
and hold PARTY CHAIN on the Party
playback using
Host again for 2 seconds or more.
multiple systems
Setting the Wired Party Chain (Wireless Party Chain
sound mode function)
You can set the sound mode when You can connect multiple audio
the Wired Party Chain function is systems in a chain via BLUETOOTH
activated. connection if all the systems are
equipped with the Wireless Party
1 Press OPTIONS. Chain function. This function allows
you to create a more exciting party
2 Press / repeatedly to select environment and to produce higher
“P. CHAIN MODE”, then press . sound output without a cable
connection.
3 Press / repeatedly to select Note that you can only play back
the mode you want, then press audio source from a BLUETOOTH
. device.
•• “STEREO”: outputs the stereo The first system in the chain to be
sound. activated becomes the Party Host
•• “RIGHT CH”: outputs the and shares the music. Other systems
monaural sound of the right become Party Guests and play the
channel. same music as that being played by
•• “LEFT CH”: outputs the monaural the Party Host.
sound of the left channel.
To exit the options menu, press Setting up and enjoying the
OPTIONS.
Wireless Party Chain
56GB
Touch WIRELESS PARTY CHAIN 5 Wait 30 seconds after the last
on the unit. Party Guest is connected.
“CHAINING” appears on the “P.CHAIN” will stop flashing on the
display. The system enters the display of the Party Host and the
Wireless Party Chain mode. BLUETOOTH device will reconnect to
When the system entered Wireless the Party Host.
Party Chain setup mode, connection
to the BLUETOOTH device is 6 Start playback on the connected
terminated automatically. BLUETOOTH device.
Other Operations
Hint
again on the Party Host before step
3 is completed. To add new Party Guests after Wireless
Party Chain has already been established,
4 Set the third or more systems as touch and hold WIRELESS PARTY CHAIN
on the Party Host , then repeat step 3 of
Party Guests. “Setting up and enjoying the Wireless
Repeat step 3. Party Chain” (page 56).
Note
To deactivate the Wireless Party
Connect the third or later systems
within 30 seconds of connecting the
Chain
previous system. “P. CHAIN” flashes Touch WIRELESS PARTY CHAIN on
on the display of the Party Host within the Party Host.
30 seconds. After 30 seconds, the
system cannot be connected. Note
When you change the function or turn off
the Party Host, the Wireless Party Chain
will be deactivated.
57GB
To make a Party Guest leave the
Wireless Party Chain Listening to music
Touch WIRELESS PARTY CHAIN on
the Party Guest which want to leave.
wirelessly with two
In this case, the rest of the Wireless systems (Speaker Add
Party Chain will remain active.
function)
Note
•• When you change the function or turn To use this function, two same
off a particular Party Guest, that Party model systems are required.
Guest will leave the Wireless Party By connecting two systems via
Chain connection. BLUETOOTH wireless technology,
•• Sleep Timer and Auto Standby functions
you can enjoy music in a more
are not available on Party Guests.
powerful way. You can also select an
audio output between double mode
Settings synchronization during
(in which the two systems play
Wireless Party Chain the same sound) and stereo mode
When the Wireless Party Chain (stereo sound).
is established, the following In the following steps, the
conditions will be applied: two systems are described as
•• If Mega Bass and Party Light “system ” (or Host system) and
settings are changed on the Party “system ” (or Guest system).
Host, the settings on Party Guests
are also changed. Note
•• DJ Effect and Karaoke settings •• To use this feature, make sure “Sony |
such as Vocal Fader and Key Music Center” app (page 44) has
Control are turned off on both been installed to your BLUETOOTH
Party Host and Party Guests. device.
•• Be sure that the BLUETOOTH device
•• Sound field settings return to
has paired with both System and
default on both Party Host and system . For details on the pairing
Party Guests. operation, see “Pairing this system with
•• When the Party Host is turned off, a BLUETOOTH device” (page 39) or
the Party Guests are also turned “One Touch BLUETOOTH Connection by
off. NFC” (page 42).
58GB
3 Touch BLUETOOTH on system Note
and system to select the •• When you use the microphone or play
BLUETOOTH function. the guitar on system , the sound will
“BLUETOOTH” appears on the not be output from system .
•• The following operations are not
display.
available on system when using
4 Connect system and a Speaker Add:
—— Sleep Timer
BLUETOOTH device via —— Auto Standby
BLUETOOTH connection —— Child Lock
(page 39). —— Gesture Mode
—— Party Lock
5 Launch “Sony | Music Center” —— Vocal Fader, Key Control & Scoring
and follow the on-screen —— Controlling the system using remote
instructions to setup the control
Speaker Add for system and
system . Settings synchronization
“HOST” appears on the display of
during Speaker Add
system , and “GUEST” appears on
the display of system . •• When the Speaker Add connection
Other Operations
the monaural sound of the •• When the above settings changed
right channel from system on either system or system
, and the left channel from , the other system settings are
system . synchronized.
•• Stereo mode - left: outputs •• When system is turned off,
the monaural sound of the left system also turns off.
channel from system , and
the right channel from system To deactivate the Speaker Add
. function
Use “Sony | Music Center” and
7 Start playback on the follow the on-screen instructions.
BLUETOOTH device, and adjust
the volume. Note
For details, see “Listening to music If you want to reset one of the two
on a BLUETOOTH device” systems while using the Speaker Add
(page 40). function, make sure to turn off the other
system.
59GB
If you do not turn off the other system
before resetting the Speaker Add Receiving a call
function, BLUETOOTH connection or
sound output may be interrupted. 1 Touch when a call is
incoming.
Hint
When an incoming call arrives,
•• Unless you deactivate the function, the
playback pauses and the system
system will try to re-establish the most
emits a ring tone.
recent connection the next time you
turn on the system.
The caller phone number or name
•• Switch to SBC codec when using the will appear on the display.
Speaker Add function. For details, see
Note
“Setting the BLUETOOTH audio codecs”
(page 43). If you touch and hold when a call is
incoming, the call will be rejected.
60GB
•• If you were listening to music before
the call, playback will resume when the
3 Press to activate the Google
call ends.
app or Siri when the Android
•• Operations may vary depending on the smartphone or iPhone/iPod is
BLUETOOTH mobile phone. Refer to the in standby or playing music.
operating instructions for your mobile The Google app or Siri is activated
phone. and you will hear the start-up
sound.
Other Operations
supplied with the Android
smartphone to activate the Google
app or refer to the operating
instructions supplied with the Preparing for Karaoke
iPhone/iPod to turn on Siri.
61GB
3 Connect an optional Reducing the vocal sound
microphone to MIC1 or MIC2/
GUITAR jack on the unit. (Vocal Fader)
Connect another optional
microphone if you want to sing in You can reduce the sound of the
duet. vocal in stereo source.
62GB
To turn off Voice Changer Note
Press VOICE CHANGER repeatedly to •• Howling may occur when using electro-
select “OFF”. acoustic guitar with “O.DRIVE” effect.
Press MIC/GUITAR LEVEL – on the unit
repeatedly to reduce the guitar volume.
Enjoying sound from a Otherwise, change to the other guitar
effect.
guitar •• Before disconnecting the guitar from
the system, press MIC/GUITAR LEVEL –
on the unit repeatedly to reduce the
You can listen to the sound from the guitar volume.
guitar by connecting a guitar to the
MIC2/GUITAR jack on the unit. To turn off the guitar mode
You can also play the guitar and sing
Touch GUITAR on the unit repeatedly
along by connecting a microphone
until the GUITAR indicator lights off.
to the MIC1 jack on the unit.
Your guitar sound can be changed
by selecting the guitar effect.
Playing the drum
1 Touch MIC/GUITAR LEVEL – on (Taiko)
the unit repeatedly to reduce
the guitar volume level.
You can play a virtual drum by using
2 Use an instrument cable (not the top panel of the system as a
supplied) to connect a guitar drum pad.
(not supplied) to MIC2/GUITAR Note
jack on the unit. •• Tap the top panel using your hands
3 Touch GUITAR on the unit gently. Do not use other items, such as a
Other Operations
stick as it will scratch the surface of the
repeatedly to select the guitar top panel.
effect. •• The pressure you apply when tapping
GUITAR indicator lights up. the top panel will not affect the volume
•• “CLEAN”: original guitar sound. level in the Taiko mode as it follows the
Recommended for electric guitar volume level of the system.
•• During the Taiko mode, the keys on the
or electro-acoustic guitar.
touch panel are deactivated except
•• “O.DRIVE”: distorted sound
and TAIKO buttons. Use the buttons
similar to an overdriven guitar on the remote control to change the
amplifier. Recommended for function or volume.
electric guitar.
•• “BASS”: original guitar sound.
Recommended for bass guitar.
63GB
1 Press TAIKO on the unit
repeatedly to select “TAIKO”.
The top panel lights up in 4 different
colors according to zone.
Lighting
guide
64GB
3 Continue to play the game for
50 seconds. Using the Sleep Timer
The score will appear on the display
after you completed the game. The system turns off automatically
after the preset time.
To deactivate Taiko
Press TAIKO on the unit repeatedly Press SLEEP repeatedly to select
until the lighting guide lights off. the time you want.
To cancel Sleep Timer, press SLEEP
repeatedly to select “OFF”.
Party Light and Speaker To check the remaining time before the
system turns off, press SLEEP.
Light
1 Press PARTY LIGHT repeatedly Using the Voice
to select “LED ON”. Guidance
2 Press LIGHT MODE repeatedly to You can hear Voice Guidance when
select the illumination mode the system enters the BLUETOOTH
you want. pairing mode or a BLUETOOTH
The illumination mode is different device is being connected or
when Wireless Party Chain is disconnected from the system.
activated.
1 Press OPTIONS.
To turn off Party Light and
2 Press / repeatedly to select
Other Operations
Speaker Light
Press PARTY LIGHT repeatedly to “VOICE GUIDANCE”, then press
select “LED OFF”. .
1 Press OPTIONS.
65GB
2 Press
/ repeatedly to select
“SAMPLER”, then press . Deactivating the touch
3 Press / repeatedly to adjust panel on the unit (Child
the Voice Guidance level, then
press . Lock)
Note You can deactivate the keys (except
•• The Voice Guidance volume level ) on the touch panel of the unit to
change according to the system’s prevent misoperation, such as child
volume level. However, in some cases, mischief.
the Voice Guidance volume level may
not change. Touch and hold on the unit for
•• In some cases, there may be a delay
more than 5 seconds.
in Voice Guidance output or the Voice
“CHILD LOCK ON” appears on the
Guidance may not work.
display.
You can only operate the system using
the buttons on the remote control.
Using optional To turn off the Child Lock function,
touch and hold on the unit for more
equipment than 5 seconds until “CHILD LOCK OFF”
appears on the display.
1 Press – repeatedly until “VOL Note
MIN” appears on the display.
•• Child Lock function will be turned off
66GB
Hold your hand above GESTURE —— when microphone or guitar is
CONTROL sensor on the unit for connected.
—— when the system is a Party Guest in
more than 5 seconds. the Wireless Party Chain function or
“PARTY LOCK ON” appears on the the Guest system in the Speaker Add
display. function.
To turn off the Party Lock function,
hold your hand above GESTURE
CONTROL sensor on the unit for
more than 5 seconds until “PARTY
Updating the software
LOCK OFF” appears on the display. The software of this system may be
Note updated in the future.
•• The party lock being applied cancels
You can update your system’s pre-
automatically in 30 seconds. installed software from the websites
•• While the party lock is applied, the below.
touch panel indications of the unit are Follow the online instructions to
turned off. update the software.
For customers in Latin America:
<http://esupport.sony.com/LA>
Setting the automatic For customers in Europe and
standby function Russia:
<http://www.sony.eu/support>
The system enters standby mode For customers in other countries/
automatically in about 15 minutes regions:
when there is no operation or audio <http://www.sony-asia.com/
signal output. support>
By default, the automatic standby
Other Operations
function is turned on.
1 Press OPTIONS.
2 Press / repeatedly to select
“AutoSTBY”, then press .
Note
•• “AutoSTBY” flashes on the display about
2 minutes before entering standby
mode.
•• The automatic standby function does
not work in the following cases:
—— during tuner function.
—— when the Sleep Timer is activated.
67GB
•• Check the connection of the
Additional Information optional equipment, if any
(page 17).
Troubleshooting •• Turn on the connected equipment.
•• Unplug the AC power cord (mains
Should you encounter a problem lead), then plug in the AC power
with your system, find your problem cord (mains lead) again and turn
in the troubleshooting checklist on the system.
below and take the corrective There is no picture/sound when
action. connected to the HDMI OUT (TV)
If the problem persists, consult your ARC jack.
nearest Sony dealer.
•• Change the setting in [HDMI
Note that if the service personnel SETUP] – [HDMI RESOLUTION]. The
changes some parts during repair, problem may be solved.
these parts may be retained. •• The equipment connected to
the HDMI OUT (TV) ARC jack
If “PROTECTX” (X is a number) does not conform to the audio
and “CHECK MANUAL” flashes signal format. In this case, set
on the display [HDMI SETUP] – [AUDIO(HDMI)] to
Immediately unplug the AC [PCM] (page 34).
•• Try the following:
power cord (mains lead), and
check if anything is blocking the —
—Turn the system off and on
ventilation openings of the unit. again.
—
—Turn the connected equipment
After you have checked and off and on again.
found no problems, reconnect —
—Disconnect then connect the
the AC power cord (mains lead), HDMI cable again.
and turn on the system. If the
issue persists, contact your There is no microphone sound.
nearest Sony dealer. •• Adjust the microphone volume
level.
•• Make sure the microphone is
General
connected to the MIC1 or MIC2/
The power does not turn on. GUITAR jack on the unit correctly.
•• Make sure the microphone is
•• Check that the AC power cord
(mains lead) is connected securely. turned on.
Additional Information
•• Move the unit away from the •• You cannot eject the disc during
fluorescent light. Synchronized Transfer or REC1
There is acoustic feedback. Transfer. Press to cancel the
transfer, then touch on the unit
•• Reduce the volume.
to eject the disc.
•• Move the microphone and guitar
•• Consult your nearest Sony dealer.
away from the system or change
the direction of the microphone. Playback does not start.
•• Wipe the disc clean (page 78).
The color irregularity on a TV
•• Reload the disc.
screen persists.
•• Load the disc that this system can
•• Turn off the TV at once, then turn
play back (page 8).
it on after 15 to 30 minutes. If the
•• Remove the disc and wipe away
color irregularity still persists,
the moisture on the disc, then
place the system farther away
leave the system turned on for
from the TV.
a few hours until the moisture
evaporates.
69GB
•• The region code on the DVD VIDEO USB device
does not match the system.
Transferring results in an error.
The sound skips. •• You are using an unsupported USB
•• Wipe the disc clean (page 78). device. Check the information on
•• Reload the disc. the website about compatible USB
•• Move the unit to a place with no devices (page 11).
vibration. •• The USB device is not formatted
Playback does not start from the correctly. Refer to the operating
first track. instructions of the USB device on
how to format.
•• Set the play mode to Normal Play
•• Turn off the system and remove
(page 28).
the USB device. If the USB device
•• Resume Play has been selected.
has a power switch, turn the USB
Press twice. Then, press to
device off and on again after
start playback.
removing it from the system. Then,
You cannot perform some perform the transfer again.
functions such as Stop, Lock •• If the transfer and erase
Search, Slow-motion Play, Repeat operations are repeated multiple
Play, or Shuffle Play. times, the file structure within the
•• Depending on the disc, you may USB device becomes fragmented.
not be able to do some of the Refer to the operating instructions
operations above. Refer to the of the USB device on how to deal
operating instructions supplied with this problem.
•• The USB device was disconnected
with the disc.
or the power was turned off
The DATA CD/DATA DVD (MP3, during transfer. Delete the
MPEG4, or Xvid) cannot be played partially-transferred file, and
back. perform the transfer again. If this
•• The data is not stored in the does not fix the problem, the USB
supported format. device may be broken. Refer to the
•• Make sure you have selected operating instructions of the USB
the correct Media Mode before device on how to deal with this
playback. problem.
The folder name, track name, file Audio files or folders on the USB
name and ID3 tag characters do device cannot be erased.
not appear properly. •• Check if the USB device is write-
•• The ID3 version is not in Version 1 protected.
(1.0/1.1) or Version 2 (2.2/2.3).
•• The character codes that can be
displayed by this system are as
follows:
—
—Upper cases (A to Z)
—
—Numbers (0 to 9)
—
—Symbols (< > * +, [ ] \ _)
Other characters appear as “_”.
70GB
•• The USB device was disconnected —
—The internal memory is
or the power was turned off fragmented.
during the erase operation. Delete
the partially-erased file. If this “NO FILE” appears on the display.
does not fix the problem, the USB •• The system has entered the
device may be broken. Refer to the software update mode, and all
operating instructions of the USB keys (except ) are deactivated.
device on how to deal with this Press on the unit to cancel the
problem. software update.
Additional Information
file, and try transfer again.
•• The bit rate used in encoding an —
—Symbols (< > * +, [ ] \ _)
audio file was low. Send an audio Other characters appear as “_”.
file with higher bit rate to the USB The USB device is not recognized.
device.
•• Turn off the system and reconnect
“READING” is displayed for an the USB device, then turn on the
extended time, or it takes a long system.
time before playback starts. •• Check the information on the
•• The reading process can take a website about compatible USB
long time in the following cases. devices (page 11).
—
—There are many folders or files •• The USB device is not working
on the USB device (page 10). properly. Refer to the operating
—
—The file structure is extremely instructions of the USB device on
complex. how to deal with this problem.
—
—The memory capacity is
excessive.
71GB
Playback does not start. •• (Except for Latin American,
•• Turn off the system and reconnect European, and Russian models)
the USB device, then turn on the Make sure you set the color
system. system correctly, according to your
•• Check the information on the TV’s color system.
website about compatible USB
Picture noise appears.
devices (page 11).
•• Wipe the disc clean (page 78).
Playback does not start from the •• If video signal from your system
first file. has to go through your VCR to
•• Set the play mode to Normal Play your TV, the copy-protection
(page 28). applied to some DVD VIDEO
programs could affect the picture
Files cannot be played back. quality.
•• Make sure you have selected •• (Except for Latin American,
the correct Media Mode before European, and Russian models)
playback. When you play back a VIDEO CD
•• USB devices formatted with file recorded in a different color
systems other than FAT16 or FAT32 system from the one you set to the
are unsupported.* system, the picture image may be
•• If you use a partitioned USB distorted (page 22, 32).
device, only files on the first •• (Except for Latin American,
partition can be played back. European, and Russian models)
Set the color system to match your
* This system supports FAT16 and FAT32, TV (page 22, 32).
but some USB devices may not support
all of these FAT. For details, refer to the The aspect ratio of the TV screen
operating instructions of each USB cannot be changed.
device or contact the manufacturer. •• The aspect ratio is fixed on your
Additional Information
The sound of your BLUETOOTH
other BLUETOOTH devices are device cannot be heard on this
present around the system. system.
In this case, turn off the other
•• Increase the volume on your
BLUETOOTH devices.
•• Make sure to enter the correct
BLUETOOTH device first, then
adjust the volume using +/–.
passkey when selecting the
system’s name (this system) on There is severe hum, noise, or
the BLUETOOTH device. distorted sound.
•• If there are obstacles between
The BLUETOOTH device cannot
detect the system, or “BT OFF” the system and your BLUETOOTH
appears on the display. device, remove or avoid the
•• Set the BLUETOOTH signal to “BT
obstacles.
ON” (page 44).
73GB
•• If there is equipment that Control for HDMI (“BRAVIA”
generates electromagnetic Sync)
radiation, such as a wireless LAN,
other BLUETOOTH device, or a The system does not turn on even
microwave oven nearby, move when the TV is turned on.
them away. •• Hold down SHIFT and press
•• Turn down the volume of the SETUP, then set [HDMI SETUP]
connected BLUETOOTH device. – [CONTROL FOR HDMI] to [ON]
(page 34). The TV must support
Gesture Control the Control for HDMI function
The Gesture Control cannot be (page 50). For details, refer to
activated. the operating instructions of your
TV.
•• Touch GESTURE ON/OFF
•• Check the speaker settings of the
repeatedly until GESTURE
TV. The system power syncs with
CONTROL lights up.
the speaker settings of the TV.
•• Make sure the Child Lock function
For details, refer to the operating
is not activated (page 66).
instructions of your TV.
The Gesture Control does not •• If the sound was output from the
operate properly. TV’s speakers the previous time,
•• Move your hand closer to the system does not turn on even
GESTURE CONTROL sensor (page when the TV is turned on.
46) when you perform the The system turns off when the TV
swiping motion. is turned off.
•• Perform the swiping motion at a
•• Check the setting of [HDMI SETUP]
slower speed.
– [STANDBY LINKED TO TV] (page
•• Select the correct mode
34). When [STANDBY LINKED TO
(PLAYBACK, DJ, SAMPLER or
TV] is set to [ON], the system turns
KARAOKE) before you start using
off automatically when you turn
the Gesture Control (page 47,
off the TV regardless of the input.
48).
•• Install a noise filter (not supplied) The system does not turn off even
to the AC power cord (mains lead). when the TV is turned off.
•• Turn off surrounding electrical •• Check the setting of [HDMI SETUP]
equipment. – [STANDBY LINKED TO TV] (page
“PARTY LOCK” appears when you 34).
touch any key on the unit. To turn the system off
automatically regardless of the
•• Set the Party Lock function to off
input when you turn off the TV, set
(page 66).
[STANDBY LINKED TO TV] to [ON].
The TV must support the Control
for HDMI function (page 50).
For details, refer to the operating
instructions of your TV.
74GB
No TV sound is output from the •• Change the speaker output on the
system. TV to TV speaker or Audio System.
•• Check the type and connection of
The Control for HDMI function
the HDMI cable or audio cable that
does not work properly.
is connected to the system and
•• Check the connection with the
the TV (page 20).
•• If your TV is compatible with
system (page 17).
•• Enable the Control for HDMI
Audio Return Channel, make
sure the system is connected function on the TV. For details,
to an ARC-compatible HDMI refer to the operating instructions
IN jack of the TV (page 20). of your TV.
•• Wait a while, then try again. If you
If sound is still not output or if
sound is interrupted, connect unplug the system, it will take
an audio cable (not supplied), a while before operations can
hold down SHIFT and press be made. Wait for 15 seconds or
SETUP, then set [HDMI SETUP] – longer, then try again.
•• Make sure the TV connected to
[AUDIO RETURN CHANNEL] to
[OFF] (page 34). the system support the Control for
•• If your TV is not compatible with
HDMI function.
•• The type and number of devices
Audio Return Channel, TV sound
will not be output from the system that can be controlled by the
even if the system is connected to Control for HDMI function is
the TV’s HDMI IN jack. To output TV restricted by the HDMI CEC
sound from the system, connect standard as follows:
—
—Recording devices (Blu-ray Disc
an audio cable (not supplied)
(page 21). recorder, DVD recorder, etc.): up
•• Change the function of the system
to 3 devices
—
—Playback devices (Blu-ray Disc
to “TV” (page 21).
•• Increase the volume on the
Player, DVD player, etc.): up to
system. 3 devices (this system uses one
Additional Information
•• Depending on the order in which
of them)
—
—Tuner-related devices: up to
you connect the TV and the
system, the system may be muted 4 devices
—
—Audio system (receiver/
and “ ” (muting) lights up on
display of the unit. If this happens, headphone): up to 1 device
turn on the TV first, then the (used by this system)
system. Wired Party Chain, Wireless
•• Set the speakers setting of the TV
Party Chain and Speaker Add
(BRAVIA) to Audio System. Refer to
the operating instructions of your Wired Party Chain function cannot
TV on how to set the TV. be activated.
•• Check the connections
The sound is output from both the
system and the TV. (page 53).
•• Make sure the audio cables are
•• Mute the sound of the system or
connected correctly.
the TV.
75GB
“PARTY CHAIN” is flashing on the 2 Press to turn on the system.
display.
•• You cannot select AUDIO IN
3 Touch and hold GUITAR and
MEGA BASS for about 3 seconds.
function if you make connection
(page 53) during Wired “RESET” appears on the display.
Party Chain function. Select other After the reset completes, the
function (page 55). system automatically reboots. Press
to turn on the system.
•• Touch and hold PARTY CHAIN on
All BLUETOOTH pairing information
the unit.
and user-configured settings, such
•• Turn off the system, then turn it
as preset radio stations are reset to
back on again. factory default setting (except for
Wired Party Chain function does some setup menu settings).
not work properly. To reset all setup menu settings, see
“Returning the setup menu settings
•• Turn off the system. Then, turn
to the default” (page 76).
it back on again to activate the
Wired Party Chain function.
Returning the setup menu
BLUETOOTH device cannot be
connected to the system during settings to the default
Wireless Party Chain function.
•• After connecting all the systems, You can return the setup
perform the pairing and menu settings (except for
connecting operations between [PARENTAL CONTROL] settings) to
the BLUETOOTH device and the the default settings.
Party Host. 1 Hold down SHIFT and press
BLUETOOTH device cannot be SETUP.
connected to the system during The setup menu appears on the TV
Speaker Add function. screen.
•• After connecting two same model 2 Press/ repeatedly to select
systems, perform the pairing and [SYSTEM SETUP], then press .
connecting operations between
the BLUETOOTH device and the 3 Press / repeatedly to select
Host system. [RESET], then press .
4 Press / repeatedly to select
Resetting the system [YES], then press .
It takes a few seconds to complete.
Do not press while resetting the
If the system still does not operate
system.
properly, reset the system to factory
default settings.
Use the keys on the touch panel of
the unit to perform this operation.
1 Unplug the AC power cord (mains
lead), then plug it back in.
76GB
Self-diagnosis Function Messages
Additional Information
•• Contact your nearest ERASE ERROR
Sony dealer or local Erase of audio files or folders on the
authorized Sony service USB device failed.
facility and give the
5-character service FATAL ERROR
number. The USB device was removed during
Example: E 61 10 transfer or erase operation, and may
have been damaged.
FOLDER FULL
You cannot transfer onto the USB
device because the number of
folders has reached its maximum.
NoDEVICE
No USB device is connected or
unsupported device is connected.
77GB
NO DISC
There is no disc in the unit. Precautions
NO MUSIC
No supported audio files exist in the When carrying the unit
playback source. To avoid damaging the disc
mechanism, perform the following
NO SUPPORT procedure before carrying the unit.
An unsupported USB device is
connected, or the USB device is Use the keys on the touch panel of
connected through a USB hub. the unit to perform this operation.
operations are not available. or heat sources such as hot air ducts,
nor leave them in a car parked in direct
REC ERROR sunlight.
The transfer did not start, stopped
On safety
partway, or otherwise could not be
•• Completely disconnect the AC power
performed.
cord (mains lead) from the wall outlet
TRACK FULL (mains) if it is not going to be used
You cannot transfer onto the USB for an extended period of time. When
unplugging the system, always grip the
device because the number of files
plug. Never pull the cord itself.
has reached its maximum. •• Should any solid object or liquid get
into the system, unplug the system, and
have it checked by qualified personnel
before operating it again.
78GB
•• AC power cord (mains lead) must be On the speaker system
changed only at the qualified service The built-in speaker system is not
shop. magnetically shielded, and the picture on
nearby TV sets may become magnetically
On handling the system distorted. In this situation, turn off the
•• Do not splash water on the unit TV, wait 15 to 30 minutes, and turn it back
on purpose. Dust and drip proof on. If there is no improvement, move the
performance is improved by the flat system far away from the TV.
top structure of the unit, but this is not
guaranteed for all the situations. If you IMPORTANT NOTICE
accidentally splash liquid on the unit,
Caution: If you leave a still video
wipe off immediately.
image or on-screen display image
•• To maintain the dust and drip proof
displayed on your TV for an extended
performance, make sure all the covers
period of time via this system, you
of the jacks/port/terminal are securely
risk permanent damage to your TV
closed.
screen. Projection TVs are especially
On placement susceptible to this.
•• Do not place the system in an inclined
position or in locations that are Cleaning the cabinet
extremely hot, cold, dusty, dirty, or Clean this system with a soft cloth slightly
humid or lacking adequate ventilation, moistened with a mild detergent solution.
or subject to vibration, direct sunlight or Do not use any type of abrasive pad,
a bright light. scouring powder, or solvent, such as
•• Be careful when placing the system
thinner, benzine, or alcohol.
on surfaces that have been specially
treated (for example, wax, oil, polish) as On BLUETOOTH communication
staining or discoloration of the surface •• BLUETOOTH devices should be used
may result. within approximately 10 meters
•• If the system is brought directly from
(unobstructed distance) of each
a cold to a warm location or is placed other. The effective communication
in a very damp room, moisture may range may become shorter under the
condense on the lens inside the unit, following conditions.
Additional Information
and cause the system to malfunction. —— When a person, metal object, wall
In this situation, remove the disc, and or other obstruction is between
leave the system turned on for about an the devices with a BLUETOOTH
hour until the moisture evaporates. connection
—— Locations where a wireless LAN is
On heat buildup
installed
•• Heat buildup on the unit during
—— Around microwave ovens that are
operation is normal and is not a cause in use
for alarm. —— Locations where other
•• Do not touch the cabinet if it has been
electromagnetic waves are
used continuously at a high volume generated
because the cabinet may have become
hot.
•• Do not obstruct the ventilation holes.
79GB
•• BLUETOOTH devices and wireless LAN •• BLUETOOTH devices connected with
(IEEE 802.11b/g/n) equipment use the this system must comply with the
same frequency band (2.4 GHz). When BLUETOOTH specification prescribed
using your BLUETOOTH device near by the Bluetooth SIG, Inc., and must
a device with wireless LAN capability, be certified to comply. However, even
electromagnetic interference may when a device complies with the
occur. This could result in lower data BLUETOOTH specification, there may
transfer rates, noise, or inability to be cases where the characteristics or
connect. If this happens, try the specifications of the BLUETOOTH device
following remedies: make it impossible to connect, or may
—— Use this system at least 10 meters result in different control methods,
away from the wireless LAN display or operation.
equipment. •• Noise may occur or the audio may
—— Turn off the power of the wireless cut off depending on the BLUETOOTH
LAN equipment when using your device connected with this system,
BLUETOOTH device within 10 meters. the communications environment, or
—— Use this system and BLUETOOTH surrounding conditions.
device as closer to each other as
possible.
•• The radio waves broadcast by this
system may interfere with the operation
of some medical devices. Since this
interference may result in malfunction,
always turn off the power on this
system and BLUETOOTH device in the
following locations:
—— In hospitals, on trains, in airplanes,
at gas stations, and any place where
flammable gases may be present
—— Near automatic doors or fire alarms
•• This system supports security
functions that comply with BLUETOOTH
specifications to ensure secure
connections during communication
using BLUETOOTH technology. However,
this security may be insufficient
depending on the setting contents
and other factors, so always be careful
when performing communication using
BLUETOOTH technology.
•• Sony cannot be held liable in any way
for damages or other loss resulting
from information leaks during
communication using BLUETOOTH
technology.
•• BLUETOOTH communication is not
necessarily guaranteed with all
BLUETOOTH devices that have the same
profile as this system.
80GB
Outputs
Specifications AUDIO/PARTY CHAIN OUT L/R:
Voltage 2 V, impedance 1 kilohm
Speaker section VIDEO OUT:
Max. output level 1 Vp-p,
MHC-V81D unbalanced, Sync. negative load
Speaker system: impedance 75 ohms
5-way, Bass Reflex HDMI OUT (TV) ARC:
Speaker unit: Supported audio signal:
Tweeter L/R Front: 50 mm, cone 2-channel Linear PCM (up to
type 48 kHz), Dolby Digital
Tweeter L/R Rear: 50 mm, cone
type HDMI section
Midrange L/R (Upper): 100 mm, Connector:
cone type Type A (19 pin)
Midrange L/R (Lower): 120 mm,
cone type Disc player section
Woofer: 300 mm, cone type System:
Compact disc and digital audio
MHC-V71D and video system
Speaker system: Laser Diode Properties
3-way, Double Bass Reflex Emission Duration: Continuous
Speaker unit: Laser Output*: Less than 44.6 μW
Tweeter L/R: 50 mm, cone type * This output is the value
Midrange L/R: 120 mm, cone type measurement at a distance of
Woofer: 300 mm, cone type 200 mm from the objective lens
surface on the Optical Pick-up
Inputs Block with 7 mm aperture.
AUDIO/PARTY CHAIN IN (TV) L/R: Frequency response:
Voltage 2 V, impedance 20 Hz – 20 kHz
Additional Information
24 kilohms Video color system format:
TV (ARC): Latin American model:
Supported audio signal: NTSC
2-channel Linear PCM Other models:
MIC1: NTSC and PAL
Sensitivity 1 mV, impedance
USB section
10 kilohms
Supported USB device:
MIC2/GUITAR:
Mass Storage Class
Sensitivity 1 mV, impedance
Maximum current:
10 kilohms (When guitar mode is
1 A
turned off.)
(USB) port:
Sensitivity 200 mV, impedance
Type A
250 kilohms (When guitar mode is
turned on.)
81GB
FM tuner section *1 The actual range will vary depending
FM stereo, FM superheterodyne tuner on factors such as obstacles between
devices, magnetic fields around a
Antenna:
microwave oven, static electricity,
FM lead antenna
reception sensitivity, antenna’s
Tuning range: performance, operating system,
87.5 MHz – 108.0 MHz (50 kHz software application, etc.
step) 2
* BLUETOOTH standard profiles
indicate the purpose of BLUETOOTH
BLUETOOTH section communication between devices.
Communication system:
BLUETOOTH Standard version 4.2 NFC section
Output: Operating frequency:
BLUETOOTH Standard Power 13.56 MHz
Class 2
Maximum output power: Supported audio formats
< 9.5 dBm Supported bit rate and sampling
Maximum number of devices to be frequencies:
registered: MP3:
8 devices 32/44.1/48 kHz, 32 kbps –
Maximum number of simultaneous 320 kbps (VBR)
connection (Multipoint): AAC:
3 devices 44.1 kHz, 48 kbps – 320 kbps
Maximum communication range: (CBR/VBR)
Line of sight approx. 10 m*1 WMA:
Frequency band: 44.1 kHz, 48 kbps – 192 kbps
2.4 GHz band (2.4000 GHz – (CBR/VBR)
2.4835 GHz) WAV:
Modulation method: 44.1/48 kHz (16 bit)
FHSS (Freq Hopping Spread
Supported video formats
Spectrum)
Xvid:
Compatible BLUETOOTH profiles*2:
Video codec: Xvid video
A2DP (Advanced Audio
Bit rate: 4.854 Mbps (MAX)
Distribution Profile)
Resolution/Frame rate:
AVRCP (Audio Video Remote
720 × 480, 30 fps
Control Profile)
720 × 576, 25 fps (except for Latin
SPP (Serial Port Profile)
American model)
HFP (Hands-free Profile)
Audio codec: MP3
HSP (Headset Profile)
Supported codecs:
SBC (Subband Codec)
AAC (Advanced Audio Coding)
LDAC
82GB
MPEG4: * The power consumption of the system
File format: MP4 File Format will be less than 0.5 W when there is no
Video codec: MPEG4 Simple HDMI connection and “BT STBY” is set
Profile (AVC is not compatible.) to “OFF”.
Bit rate: 4 Mbps
Resolution/Frame rate: Design and specifications are subject
720 × 480, 30 fps to change without notice.
720 × 576, 25 fps (except for Latin
American model)
Audio codec: AAC-LC (HE-AAC is
not compatible.)
DRM: Not compatible
General
Power requirements:
AC 120 V – 240 V, 50/60 Hz
Power consumption:
MHC-V81D: 190 W
MHC-V71D: 120 W
Power consumption (at the Power
Saving mode):
0.5 W (When “BT STBY” is set to
“OFF” and [CONTROL FOR HDMI]
is set to [OFF].)
2 W* (When “BT STBY” is set to
“ON” and [CONTROL FOR HDMI] is
set to [ON].)
Dimensions (W/H/D) (Approx.):
MHC-V81D:
378 mm x 1,060 mm x 427 mm
Additional Information
(without side protectors)
447 mm x 1,060 mm x 427 mm
(with side protectors)
MHC-V71D:
370 mm x 930 mm x 427 mm
Mass (Approx.):
MHC-V81D: 26.5 kg
MHC-V71D: 22.0 kg
Operating temperature:
5 °C to 35 °C
83GB
Language code list
The language spellings conform to the ISO 639:1988 (E/F) standard.
Code Language Code Language Code Language Code Language
1027 Afar 1186 Scots Gaelic 1350 Malayalam 1513 Siswati
1028 Abkhazian 1194 Galician 1352 Mongolian 1514 Sesotho
1032 Afrikaans 1196 Guarani 1353 Moldavian 1515 Sundanese
1039 Amharic 1203 Gujarati 1356 Marathi 1516 Swedish
1044 Arabic 1209 Hausa 1357 Malay 1517 Swahili
1045 Assamese 1217 Hindi 1358 Maltese 1521 Tamil
1051 Aymara 1226 Croatian 1363 Burmese 1525 Telugu
1052 Azerbaijani 1229 Hungarian 1365 Nauru 1527 Tajik
1053 Bashkir 1233 Armenian 1369 Nepali 1528 Thai
1057 Byelorussian 1235 Interlingua 1376 Dutch 1529 Tigrinya
1059 Bulgarian 1239 Interlingue 1379 Norwegian 1531 Turkmen
1060 Bihari 1245 Inupiak 1393 Occitan 1532 Tagalog
1061 Bislama 1248 Indonesian 1403 (Afan) Oromo 1534 Setswana
1066 Bengali; Bangla 1253 Icelandic 1408 Oriya 1535 Tonga
1067 Tibetan 1254 Italian 1417 Punjabi 1538 Turkish
1070 Breton 1257 Hebrew 1428 Polish 1539 Tsonga
1079 Catalan 1261 Japanese 1435 Pashto; Pushto 1540 Tatar
1093 Corsican 1269 Yiddish 1436 Portuguese 1543 Twi
1097 Czech 1283 Javanese 1463 Quechua 1557 Ukrainian
1103 Welsh 1287 Georgian 1481 Rhaeto-Romance 1564 Urdu
1105 Danish 1297 Kazakh 1482 Kirundi 1572 Uzbek
1109 German 1298 Greenlandic 1483 Romanian 1581 Vietnamese
1130 Bhutani 1299 Cambodian 1489 Russian 1587 Volapük
1142 Greek 1300 Kannada 1491 Kinyarwanda 1613 Wolof
1144 English 1301 Korean 1495 Sanskrit 1632 Xhosa
1145 Esperanto 1305 Kashmiri 1498 Sindhi 1665 Yoruba
1149 Spanish 1307 Kurdish 1501 Sangho 1684 Chinese
1150 Estonian 1311 Kirghiz 1502 Serbo-Croatian 1697 Zulu
1151 Basque 1313 Latin 1503 Singhalese 1703 Not specified
1157 Persian 1326 Lingala 1505 Slovak
1165 Finnish 1327 Laothian 1506 Slovenian
1166 Fiji 1332 Lithuanian 1507 Samoan
1171 Faroese 1334 Latvian; Lettish 1508 Shona
1174 French 1345 Malagasy 1509 Somali
1181 Frisian 1347 Maori 1511 Albanian
1183 Irish 1349 Macedonian 1512 Serbian
84GB
Parental Control area code list
Code Area Code Area Code Area Code Area
2044 Argentina 2165 Finland 2362 Mexico 2149 Spain
2047 Australia 2174 France 2376 Netherlands 2499 Sweden
2046 Austria 2109 Germany 2390 New Zealand 2086 Switzerland
2057 Belgium 2248 India 2379 Norway 2528 Thailand
2070 Brazil 2238 Indonesia 2427 Pakistan 2184 United Kingdom
2079 Canada 2254 Italy 2424 Philippines
2090 Chile 2276 Japan 2436 Portugal
2092 China 2304 Korea 2489 Russia
2115 Denmark 2363 Malaysia 2501 Singapore
Additional Information
85GB
©2018 Sony Corporation Printed in Malaysia 4-733-312-15(1)