Professional Documents
Culture Documents
Welding Machine Checklist
Welding Machine Checklist
Welding Machine Checklist
1 Engine condition
6 Operators fitness
14 Seat Belt
17 Steps/Grab Iron
Operator/Driver signature:
Safety Officer Signature:
UPGRADE SECURITY FACILITIES PROJECT-ABQAIQ&AINDAR
6 Fuel level ok
12 Earth Cable
Technician Signature
Operator/Driver signature:
1.WELDING MACHINE
2.TERMINALS/JOINTS
3.CABLE
4. ElEREODE HOLDER/CLAMP
5.WORK AREA
Welder Signature:
Supervisor Signature:
UPGRADE SECURITY FACILITIES PROJECT at ABQAIQ&AINDAR
5 Grease Bearings
7 Inspect Blade
8 Blade Guard
9 Wheels Condition
11 Operators fitness
Operator signature:
Supervisor Signature:
1 Engine condition
2 Hydraulic System
7 Operators fitness
14 Seat Belt
Operator/Driver signature:
Safety Officer Signature:
UPGRADE SECURITY FACILITIES PROJECT-ABQAIQ&AINDAR
Verify all guards are secure and function correctly (check latches,
2 locks, fasteners and/or interlocks).
Visually check that the air receiver drain tap is closed before
5 operating.
Check and drain the moisture from the air receiver tank.
8
10 Check availability of spare parts e.g. air filters, air hose and
fittings, etc.
11
Check that the gauges and air receiver drain tap are functioning.
Adjust, repair or replace as needed..
11 Does the height of mobile scaffold within the ratio (1:3) i.e.
1 mtr min. base = max. allowable height 3 mtr.
1 Engine condition
2 Hydraulic System
7 Operators fitness
14 Seat Belt
Operator/Driver signature:
Safety Officer Signature:
UPGRADE SECURITY FACILITIES PROJECT-ABQAIQ&AINDAR
7 Handles
Inspected by :
1 Engine condition
6 Operators fitness
13 Seat Belt
Operator/Driver signature:
1 Engine condition
6 Operators fitness
13 Seat Belt
Operator/Driver signature:
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
UPGRADING SECURITY FACILITIES PROJECT-ABQAIQ
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Ashi &Bushnag Co. Abqaia Camp Inspection chcecklist
DATE:
S.no DESCRIPTION SAT SUN MON TUE WED THU FRI
1 Engine condition
6 Operators fitness
13 Seat Belt
Operator signature:
Supervisor Signature:
S.NO
Is the ladder looking straight?
Is the ladder painted or dirty making it difficult to look for defects?
Is there any sign of crack or bend in the stiles or rungs?
Is there any knot big enough to suspect the stability of the ladder?
Is the ladder long enough?
Is the ladder being locked to avoid displacement?
Is the ladder placed in such a way that there is about 1.5 m projection above the working platform, if it is used as approach?
Ladder inspection colour code followed?
After the inspection, the ladder is approved/ not approved for further works.
UPGRADE SECURITY FACILITIES PROJECT AT ABQAIQ&AINDAR
4 Exterior(frames,outriggers)
9 Compressor
10 Boom cylinders
11 Boom erecting
12 Pump cylinders
13 Concrete lines
14 Boom sections
15 Wheels Condition
16 Operators fitness
Operator signature:
Supervisor Signature:
Safety Officer Signature:
UPGRADE SECURITY FACILITIES PROJECT at ABQAIQ&AINDAR
2 Engine condition
4 Fuel level
6 Noise level
8 Operators fitness
Operator signature:
Supervisor Signature:
7 Engine condition
9 Fuel level
10 Operators fitness
Operator signature:
Supervisor Signature:
Safety Officer Signature:
UPGRADE SECURITY FACILITIES PROJECT-ABQAIQ&AINDAR
1 Engine condition
6 Operators fitness
13 Rear Mirror
14 Seat Belt
General - Check for loose or broken parts,damaged
operator cab, instrument operation,loose wheel
nuts, or track spracket nuts, oil leaks,damaged or missing safety
signs (decals).
15
Seat belt, seat bar and control interlocks -
16 Check function
Operator/Driver signature: