Professional Documents
Culture Documents
MP100 Medical Waste Incinerator Datasheet
MP100 Medical Waste Incinerator Datasheet
com
Medical
Primary Chamber
QUALITY ASSURED
FIRM
QUALITY ASSURED
FIRM • Heavily insulated internal refractory lining.
ISO9001:2015 ISO14001:2015
Constructed from high grade refractory brick
ensuring a secure self supporting, interlocking
The MP-100 is Addfields most compact medical
arrangement.
incinerator. Securely destroying a complete range of • Manually opening, securely locking, access door with
Medical, Pathological and Clinical waste. Designed and viewing port.
built along the latest advances in medical incineration. • Automatic temperature controlled on-off waste
ignition burner complete with internal air fans.
Benefiting from Hot Hearth technology, efficiently • Hot Hearth Combustion Burner, temperature
recycling heath throughout and below the primary controlled on-off, complete with internal air fans.
chamber, delivering complete 360° heating. • Secondary combustion burner air fans, automatically
Unrivalled in it’s field boasting a 40% reduction in fuel controlled distribution to their designated area.
consumption compared to alternative solutions. • Two temperature sensor mounting points.
Valmena Limited
Akarnanias 3 | Limassol 3307 | Cyprus
info@valmena.com | +357 25 318 522 | www.valmena.com
kValmena Ltd. All information should be used as a guide only, specifications are subject to change without notice.
Control Panel
Addfield
Intelligent Controller
Simple to operate adaptive control system for achieving
optimal results from your machine.
Controller Features
The Addfield Intelligent Controller has been
developed to provide you with a simple yet
effective operational process. Designed around
a touch screen HMI interface, and independent
burner control switches.
*We reserve the right to change the specification, dimensions and quality of materials from time to time, so long as the alteration is minor or an improvement to the said
product.
Valmena Limited
Akarnanias 3 | Limassol 3307 | Cyprus
info@valmena.com | +357 25 318 522 | www.valmena.com
kValmena Ltd. All information should be used as a guide only, specifications are subject to change without notice.
2435
1150
PLAN VIEW
ISOMETRIC VIEW
3285
THIRD ANGLE PROJECTION
1870 1050 (UNLESS STATED OTHERWISE)
MATERIAL: TOLERANCES
(UNLESS STATED OTHERWISE)
N/A
WHOLE NUMBERS ±1.00
FINISH: 1 DECIMAL PLACE ±0.10
N/A 2 DECIMAL PLACE ±0.05
ANGLES ±0.50°
WEIGHT: 2800 KG
1875
3825
PROJECT:
STANDARD-MP100
TITLE:
DATE DRAWN CHECKED APPROVED DATE DRAWN CHECKED APPROVED DATE DRAWN CHECKED APPROVED DATE DRAWN CHECKED APPROVED DATE DRAWN CHECKED APPROVED Addfield Environmental Systems LTD (2018)
28/03/2019 KJ HB HB This drawing and any information or
D C B A - descriptive material set out on it are the confidential and DRAWING No. REV
COMMENTS COMMENTS COMMENTS COMMENTS COMMENTS
copyright propertyof Addfield Enviromental Systems, and
MUST NOT BEDISCLOSED, COPIED, LOANED in whole or part 7-001-03
or used for any purpose without the written permission of
-
FIRST ISSUE Addfield Enviromental Systems.
SHEET No. 1 OF 1 SCALE: 1:35 A3