Download as pdf or txt
Download as pdf or txt
You are on page 1of 9

GST Membrane onshore tank

Pump tower design

June 2016
Disclaimer

This document is strictly confidential. Any unauthorised access to, appropriation of,
copying, modification, use or disclosure thereof, in whole or in part, by any means, for
any purpose, infringes GTT’s rights. This document is part of GTT’s proprietary know-
how and may contain trade secrets protected worldwide by TRIPS and EU Directives
against their unlawful acquisition, use and disclosure. It is also protected by Copyright
law. The production, offering or placing on the market of, the importation, export or
storage of goods or services using GTT’s trade secrets or know-how is subject to GTT’s
prior written consent. Any violation of these obligations may give rise to civil or criminal
liability. © GTT, 2010-2016

01/06/2016 JGC/Rekind
CONFIDENTIAL
2
External Structures & Piping Arrangement
Vacuum breakers Pressure relief valves

Pressurization ring for


insulation space

01/06/2016 JGC/Rekind
Tubular structure area

CONFIDENTIAL
Not technology dependant

3
Typical Tubular Structure

Anchored on top (Same as 9%Ni)

01/06/2016 JGC/Rekind
CONFIDENTIAL
Bottom guide
4
Pump tower

Pump tower installation


Pump tower has to be installed during erection of the of the containment system.

1° option: Installation of the pump tower from ceiling.


Pipes by pipes through cold boxes and installation of the accessories, platform and
ladders from inside

01/06/2016 JGC/Rekind
CONFIDENTIAL
5
Pump tower

2° option: Installation of the pump tower from inside (section by section).


Section of pumps tower inserted through side opening and welded after lifting.

01/06/2016 JGC/Rekind
CONFIDENTIAL
6
Pump tower

Installation of the pump tower on wall (seismic area)


In case of seismic area pump tower should be fixed on wall
Plate welded on an
insert on concrete
tank wall

01/06/2016 JGC/Rekind
CONFIDENTIAL
7
Smaller tank size:
Reduced unpumpable with sump
Example of a 40,000m3 LNG tank
44m Tank diameter
36m Overall height
Sump well configuration only 500m3 dead stock
Increased prefabrication : only 4 months for
Membrane system installation on site
Reduced footprint and tank height

01/06/2016 JGC/Rekind
CONFIDENTIAL
8
Thank you for your attention
Stéphane Maillard • smaillard@gtt.fr

01/06/2016 JGC/Rekind
CONFIDENTIAL
9

You might also like