Professional Documents
Culture Documents
Senior Instrument Engineer Resume - Ahammad
Senior Instrument Engineer Resume - Ahammad
Senior Instrument Engineer Resume - Ahammad
PROFESSIONAL SUMMARY:
I am an Instrumentation & Control professional with 12+ years of experience in PMC and EPC
Greenfield /Brownfield Projects in Middle east handling Instrumentation, Control system, and Project
Management - Covering entire Project Lifecycle starting from Engineering review, Inspection,
Project Construction support, Pre-commissioning ,Commissioning & Start Up activities
(such as Calibration, FAT, SAT, Loop checking, Functional Testing of Instrument & Control
systems), Procurement to Final Turnover & Close-out Stage.
Worked with Leading MNCs in Oil and Gas and Petrochemical projects.
Core competencies:
Through and extent knowledge in project HSE procedures & practices as per the globalized working
standards.
Hands on experience in Engineering review, Inspection, commissioning activities, Pre
commissioning, FAT, SAT, Loop check, DCS, ESD, SCADA, Function test, Tendering, Procurement,
Functional Safety (SIL), Engineering review, PRIMAVERA P6 , and designing In tools.
Proficient Experience in Managing and coordinating with EPC contractor/Licensor/Vendors/Suppliers & Client
Proponent Team during Detail Design review, Project Construction, Pre-commissioning, Commissioning &
Start Up activities.
Handling the project according to Time, Scope & Cost.
Deft in managing material requisitions, TBE along with evaluation of vendor offers & initiating documentation
for design engineering deliverables involving P & ID, specifications, datasheets, wiring drawing, cable
schedule, instrument installation details, hookup, Loop, drawing etc.
Having good Knowledge of Hazardous area classification, SIL, NEMA, ISA, ATEX, Aramco Standards.
Thorough knowledge in reviewing Electrical and Instrument System drawings like, Architecture Diagram,
Instrument Specification Sheet, Interconnection Diagram, Installation Schedule, Loop Diagrams, Hook-up
drawing, I/O List, Cable Schedule, Cause & Effect Diagram, Layout Drawing, Logic and P & I Diagram.
Plan & Organize work: Closely follow-up the plan and organize work with EPC Contractor & Main
Automation Contractor to meet the project schedule. Expedite and follow up of Engineering & Procurement
deliverables and transmittals.
Communication Skills: Posses Strong Communication and Coordination skills with Contractor & Client to
resolve technical/work front issues required to meet the Daily Progress of Installation & Precommissiong
activities.
Safety: Ensured the daily work is carried out in accordance with the Company HSE and Security policies
and procedures and meet company HSE goals and targets and actively participated in HSE programs.
Experience in Interface Management with Different Contractors and Multi discipline Team for
coordinating and Solving E&I Engineering & Construction Interface Issues.
OFS Certifications
Project Management:
Certified Competency in Ex (001&009)
BOSIET.
Instrumentation and Control:
Intools Smart Plant Instrumentation (SPI).
SP3D FOR E&I.
E3D FOR E&I.
NAVIS WORKS.
AUTOCAD 2D&3D.
SRY:
ACADEMIA
2007 - 2011 Batch B.E. (Electronics & Communication Engineering) from JNTU Anantapur University,
with First Class
CAREER SCAN
Project Handling:
Client: BWE HIBISCUSS ALPHA MOPU (GABON SOUTHAFRICA).
Company: WASCO ENGINEERING INTERNATIONAL(DUBAI,JEBELALI,OSC).
Role: Senior Instrument and Control Engineer PMC
Period: June 2020 to till date.
MOPU: Mobile Offshore Production Unit.
Project Handling:
Client: ADNOC, ABUDHABI (ESTIDAMA – UPGRADATION OF EXISTING PLANT)
Company: FOX SOLUTIONS FZE (DUBAI, SILICON OASIS).
Role: Senior I&C Engineer
Period: March 2018 to April 2020.
Responsible for witnessing Engineering review, loop Check, FAT, SAT, function tests,
Commissioning and Startups.
Trip analysis (root cause analysis with trend and Alarms historian) in Emerson Ovation DCS/
SCADA.
Involved in ENMC, Fire alarm SAT, F&G, Heat tracing panel SAT and Commissioning.
Inspection and testing of electrical pumps, motors and compressors and startup.
Monitoring and inspection of Construction activities issues and daily report to
construction manager PMC.
Attending Risk Management Analysis meetings and updating risk register.
Handling the project according to Scope, Schedule and Cost.
Lockout Tag out trained.
Using Cost: Benefit analysis in order to check material to be purchased or leased.
Managing contractor by reviewing preparation of detailed design drawings, material
specifications and procurement, and/or construction bid packages.
Tracking, Budgeting, ETC, Comparing Critical path with baseline.
Report extraction, updation, TSLD, schedule comparison in Primavara.
Functional safety (SIL) review meeting, verification and analysis.
coordinating multi discipline team in order to achieve tasks within targeted date.
Leading construction and commissioning activities and conduct meeting and walkthrough to
monitor the site daily construction progress for field instrumentation installation.
Provide technical support to project management activities, procurement and project
controls through all project cycle and answer Technical Queries raised by Contractor when
required.
Handling the project according to Scope, Schedule and Cost.
Managing contractor by reviewing preparation of detailed design drawings, material
specifications and procurement, and/or construction bid packages.
Coordination with client’s operation team regarding issues concerning existing facilities.
Responsible for witnessing of Instrument Installation (Gauges, Switch’s, Transmitters, RTD,
Thermocouple etc.) both Foundation field bus and HART instruments.
Witnessing SAT, commissioning and Start up for CEMS, SWAS, BTLD, Flame Scanners,
Analyzers, ENMC, Switch gear, TCP/IP, panels, CCTV and packages (AUX boiler,
boilers, Turbine GE, Hydrogen Dosing System).
Reliability test for boilers.
Involved in Commissioning activities Emerson Ovation.
Review documents & drawings based on project contract, Royal commission standards and
as per client requirement and standards.
Witnessing site activities such as installation of instruments, Termination and glanding Panel,
JB.
Reviewing Engineering documents such as FEED documents, procedures, Cause & Effect,
Logic Diagram, P&ID, Location layout, Instrument index wiring drawing, Data sheet etc.
Involved and witnessed startup and commissioning activities.
Attending Material inspection (MRI).
Raising NCR as per requirement.
Attending POD and MOM meetings.
Attending SIL review meetings.
Closing punchs, PSSR walk through.
Creating OBS, allocation of work packages for Instrument department.
Project Handling:
Project Handled:
Company: AL AMARA INTERNATIONAL Ltd.
Client: SAHARA PETROCHEMICALS(PP-POLY PROPELENE) KSA,JUBAIL INDUSTRIAL AREA.
Role: Instrument Engineer
Period: January 2013 to April 2016.
Extensive knowledge and experience in EPC estimating practices and methods, including
demonstrated ability to organize, direct, perform, review and present cost estimating products
with a minimum of supervision.
Involved in designing in FEED phase, Design and detail engineering of projects.
Attending Job explanation meetings and site visits for Surveillance of the project.
Able to understand cost index and escalation projections.
Technical and practical comprehension of engineering and construction methods and techniques.
Knowledge of current industry and technical developments in oil and gas and petrochemical
industries.
Knowledge of global market pricing and construction practices.
Skilled in oral and written communication with demonstrated ability to present Estimating
information to peers and management.
preparation of BOQ, scope of work, review of change requests.
Proficient in Lump Sum (LSTK) and Design Build estimates for competitive bid projects.
Demonstrated ability to readily analyze estimate data and correlate to other projects and to
conceptualize the total project scope.
Coordination with the procurement team / vendors and clients.
Attending technical review meetings.
Understanding risk, where risk can exist, factors contributing to risk, risk management and
categorization, and terms in risk management.
Project Handled:
Title: AVINEON INDIA PRIVATE LIMITED, INDIA
Role: Junior Instrument Engineer
Period: May 2011 to November 2012.
Execute and Lead the Instrumentation Team to carry out the activities including cable laying, Megger
checking, Cable tray installation, Cable glanding and termination, Control panel erection, Installation
of Junction box, Field Instrument and Impulse tubing Installation.
Involved in loop checking and calibration activities.
Raise a QC inspection for executed works as per ITP’s & rectify the deficiency if any.
Checking the drawings for proper location of instruments and JB.
Raising MTO for site activities.
Preparation of Look ahead Schedule.
Attending meeting MOM.
IT FORTE
Well versed with Windows8, Windows 7, Vista, Xp, AutoCAD and MS Office(2010).
PERSONAL DOSSIER