Professional Documents
Culture Documents
DS00004015 Reva TP1100 Data Sheet
DS00004015 Reva TP1100 Data Sheet
Summary
The proliferation of high-speed
data, broadband multimedia
and circuit-to-packet conver- Key Features
gence is rapidly driving the need • Best in class clock performance
for high quality synchronization with BesTime and SmartClock
outside the network core into technologies
metro and access. However, • PRS with Type II/Stratum 2E and
the synchronization economics Type I/Stratum 3E holdover TimeProvider 1100
and functional requirements of • Universal input and output cards
access nodes differ significantly • E1, 2.048MHz, T1, 1.544MHz, CC
from traditional core nodes. A • NTP server/client with MD5
reduced number of outputs, authentication
smaller footprint and lower • T1 span line retiming
cost points, while maintaining • SNMP management Standalone PRS
the PRS accuracy and SSU/BITS An integrated GPS option allows the
performance of a core office Key Benefits TimeProvider 1100 to be a standalone
synchronization system, are still • Small footprint suitable for small or Primary Reference Source that meets
critical requirements for a small medium sized central offices GR 2830/G.811 requirements. Utilizing
office synchronization solution. • Flexible configuration: functions as Microchip's BesTime® technology,
The Microchip TimeProvider a stand alone PRS with redundant system outputs are constructed from
1100 is ideally suited to meet rubidium and quartz clocks or as an the optimum characteristics of all
this need. SSU/BITS shelf synchronization sources.
microchip.com
Input, Output And Clock Function BesTime Technology
Innovative design employs the latest technologies to combine The BesTime technology is based on a Multiple Input Fre-
the input, output and clock functions in one compact card. quency Lock Loop (MIFLL) architecture, designed to continu-
This unique architecture enables two IOCs to provide redun- ously analyze the relative stability of each source. During
dancy and protection simultaneously. tracking and holdover modes, BesTime determines the
optimum correction data and adaptively ensembles the input
The IOC Card provides: references to generate enhanced system performance.
• Input performance monitoring, qualification and selection
• Holdover based on rubidium
• or quartz with SmartClock™ technology Filtering and distri- SmartClock Technology
bution of precise synchronization Microchip's SmartClock technology improves the perfor-
• Retiming of T1 circuits mance and accuracy of the oscillators. Using smart firmware
algorithms, SmartClock “learns” the effects of aging on the
Management Function clock while it is locked to a reference signal and stores this
The communication gateway of the TimeProvider 1100 is the information. When the incoming reference signals are lost or
Information Management Card (IMC), which allows provision- disqualified, SmartClock applies the stored data to compen-
ing and management, collecting status information from the sate for frequency changes, keeping a continuous distribution
IOC cards and processing signal alarms. This information is of highly stable synchronization signals.
provided to the network management system and/or craft
provisioning software.
GPS
Input/Output
Clock A Up to 64:
1 X PRC Qtz or Rb E1/2.048 MHz
T1/CC
2 X Telecom 8 kHz
Input/Output TIA/EIA-B-422:
Clock A 1.544/2.048
Qtz or Rb
TPIU
The Microchip name and logo and the Microchip logo are registered trademarks of Microchip Technology Incorporated in the
U.S.A. and other countries. All other trademarks mentioned herein are property of their respective companies.
© 2021, Microchip Technology Incorporated. All Rights Reserved. 5/21 DS00004015A