Professional Documents
Culture Documents
Document 3
Document 3
Fiberglass Reinforced Plasic Products INFUPLY (Combination product for infusion) VACFILM400Y (Vacuum Bagging Film)
1. Perforated release ilm combined with knitted infusion A high strength, high elongation bagging ilm for low
VINYL ESTER RESIN
mesh by gluing. temperature vacuum bagging Applications. A multilayer
2. This new system allows the material to be cut into co-extruded product with excellent resistance to polyester,
General Purposes (GP) & FRP Lining different widths and complex forms. The adhesive is vinyl ester and epoxy resins. VACFILM 400Y is available
spread over the entire surface. on large width and is ideal for use in the production of
EVERPOL 324 VE-GP is a Bisphenol A epoxy vinyl ester resin having outstanding chemical resistance to a wide
3. This process offers many possible combinations wind energy structures and marine.
range of substances, (acids, alkali’s, oxidizing agents) at room and elevated temperatures. including drainage low variables.
Note : VACFILM 400Y is not suitable for use in autoclave cure
Pipe Lining cycles.
PHYSICAL PROPERTIES
EVERPOL 324 VE-P beneits include low foaming characteristics, high tensile elongation and lexibility for Infusion mesh Release ilm PHYSICAL PROPERTIES Method
manipulating the production line speeds while producing pipes by continuous and helical ilament winding INFUPLY2 = Vi1 A2200 Max. Use Temperature 150°C ISO 3146
process. Material PE PE Color Yellow
Maximum use temperature 100°C - 120°C Elongation at break 400% (±10%) ASTM D882
Skin Coat 120°C Tensile strength at break 40N/mm² (±10%) ASTM D882
EVERPOL 324 VE-SC has excellent blister resistance and signiicantly reduces the occurrence of print through, to Color Blue Orange Yield 509 : 19.08m²/kg Internal
produce durable moldings with an enhanced surface inish. Weight 150g/m² 659 : 14.66m²/kg
759 : 12.90m²/kg
Fireguard Packaging : 50 m/Roll, Width 4.6 m
Everpol 324 VE-FG gives outstanding ire protection to FRP laminates which are accidentally exposed to direct
laming. It is also suitable as a ire-retardant coating on wood and other slightly porous surfaces. However, due
to lack of adhesion after intumescences, it is not suitable for use on metals.