Professional Documents
Culture Documents
Cem 20055
Cem 20055
Cem 20055
-/55/98/51
CONTENTS
Technical specification ..................................................................1-2
Service measurement setup..........................................................1-3
Service aids .................................................................................1-4
Block diagram................................................................................4-1
Wiring diagram...............................................................................4-2
Main board
Circuit diagram ..................................................................5-1..5-4
Layout diagram..................................................................5-5..5-6
Servo board
Circuit diagram .........................................................................6-1
Layout diagram..................................................................6-2..6-3
Panel board
Circuit diagram .........................................................................7-1
Layout diagram..................................................................7-2..7-3
Version 1.1
TECHNICAL SPECIFICATION
Radio
MEASUREMENT SETUP
Tuner FM
Bandpass
DUT 250Hz-15kHz LF Voltmeter
e.g. 7122 707 48001 e.g. PM2534
RF Generator
e.g. PM5326
Ri=50:
Use a bandpass filter to eliminate hum (50Hz, 100Hz) and disturbance from the pilottone (19kHz, 38kHz).
Tuner AM (MW,LW)
Bandpass
250Hz-15kHz LF Voltmeter
DUT e.g. 7122 707 48001 e.g. PM2534
RF Generator
e.g. PM5326
S/N and distortion meter
e.g. Sound Technology ST1700B
Ri=50:
Frame aerial
e.g. 7122 707 89001
To avoid atmospheric interference all AM-measurements have to be carried out in a Faraday´s cage.
Use a bandpass filter (or at least a high pass filter with 250Hz) to eliminate hum (50Hz, 100Hz).
CD Recorder
Use Audio Signal Disc SBC429 4822 397 30184 Use Universal Test Cassette CrO2 SBC419 4822 397 30069
(replaces test disc 3) or Universal Test Cassette Fe SBC420 4822 397 30071
DUT
DUT LF Generator L
L e.g. PM5110
R
R
S/N and distortion mete
S/N and distortion meter e.g. Sound Technology ST170
e.g. Sound Technology ST1700B
LEVEL METER
LEVEL METER e.g. Sennheiser UPM550
e.g. Sennheiser UPM550 with FF-filter
with FF-filter
SERVICE AIDS
GB WARNING ESD
All ICs and many other semi-conductors are
susceptible to electrostatic discharges (ESD).
Careless handling during repair can reduce life
drastically.
When repairing, make sure that you are
connected with the same potential as the mass
of the set via a wrist wrap with resistance.
Keep components and tools also at this
potential.
GB
Safety regulations require that the set be restored to its original CLASS 1
condition and that parts which are identical with those specified,
be used LASER PRODUCT
Safety components are marked by the symbol ! .
Lead free
INSTRUCTIONS ON CD PLAYABILITY
Customer complaint
"CD related problem"
playability N
ok ?
Y 3
For flap loaders (= access to CD drive possible)
"fast" lens cleaning cleaning method 4 is recommended
check playability
playability N
ok ?
Play a CD
for at least 10 minutes
check playability
playability N
ok ?
return set
INSTRUCTIONS ON CD PLAYABILITY
1 4
PLAYABILITY CHECK LIQUID LENS CLEANING
Before touching the lens it is advised to clean the
surface of the lens by blowing clean air over it.
For sets which are compatible with CD-RW discs
This to avoid that little particles make scratches on
use CD-RW Printed Audio Disc ....................7104 099 96611
the lens.
TR 3 (Fingerprint)
TR 8 (600µ Black dot) maximum at 01:00
Because the material of the lens is synthetic and coated
• playback of these two tracks without audible disturbance with a special anti-reflectivity layer, cleaning must be done
playing time for: Fingerprint 10seconds with a non-aggressive cleaning fluid. It is advised to use
Black dot from 00:50 to 01:10 “Cleaning Solvent
• jump forward/backward (search) within a reasonable time
2
CUSTOMER INFORMATION
CEM210
CEM210
PL15
PL10
M1
0002
6501
PL25
PL11
PL19 SPR3/4
PL21 0001
PL17
CD01
PL04
PL22 PL09
PL23
PL24
PL14 PL05
6507
PL13 PL18
SPR1/2 PL06 6503
PL20
PL16 6504
PL08
PL01
PL26 PL12
PL05
PL02
PL06
PL03
0003
6502
MECHANICAL PARTSLIST
0001 996510028979 SERVO PCB-A (-/55)
0002 996510029006 PANEL PCBA (-/55)
0003 996510028976 MAIN PCB-A (-/55)
6501 996510028968 BKT DAMPER LEFTSECCT=1.2mm
6502 996510028969 BKT RIGHTSECCT=1.2mm
ELECTRICAL PARTSLIST
MAIN BOARD ASSEMBLY
U4 996510027736 IC LM2950L-50
U5 996510027771 IC LS4558F SOP-8 Op
U7 996510027782 IC PLL - DTS LP9257 SOP-20-300-
U8 996510027775 IC 7313
XT3 996510027748 Crystal 32.768 KHz
ACCESSORIES
RC01 996510027724 Remote Control
RU01 996510028991 Rubber End Rubber(Black)
SC01 996510028988 Machine Screw M5x8 Flat
UK01 996510028973 Unit Key1mm EGIW/LOCKER
JI01 996510028983 Standard connector
ELECTRICAL PARTSLIST
PANEL BOARD ASSEMBLY