Drum Axle Pump Remove

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

CS-533E CP-533E Vibratory Compactor ASL00001-UP (MACHINE)... https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...

Welcome: j210ms4
Product: VIBRATORY COMPACTOR
Model: CS-533E VIBRATORY COMPACTOR ASL03391
Configuration: CS-533E CP-533E Vibratory Compactor ASL00001-UP
(MACHINE) POWERED BY 3054C Engine

Disassembly and Assembly


CP-533E and CS-533E
Vibratory Soil Compactors
Machine Systems
Media Number -KENR3664-05 Publication Date -01/12/2009 Date Updated -17/12/2009

i01942613

Piston Pump (Drum Propel) - Remove


SMCS - 3203-011; 5070-011

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-2082 Lifting Hook 1
6V-9508 Plug 4
6V-9829 Cap As 4
6V-9509 Plug 2
ZZ
6V-9830 Cap As 2
6V-9511 Plug 3
6V-9832 Cap As 3

Start By:

A. Remove the vibratory pump. Refer to Disassembly and Assembly, "Piston Pump (Vibratory) -
Remove".

Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN PHOTOGRAPHS IN


THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS SHOWN IN ORDER TO ASSIST
THE EXPERIENCED SERVICEMAN.

1 of 3 11/15/2017 2:19 PM
CS-533E CP-533E Vibratory Compactor ASL00001-UP (MACHINE)... https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...

Illustration 1 g01010949

1. Loosen jam nut (1). Remove cotter pin (2) and pin (3). Move cable assembly (4) out of the way.

Illustration 2 g01010951

2. Remove hose assembly (5) and hose assembly (6) .

3. Remove hose assembly (8) .

4. Disconnect harness assembly (7) .

Illustration 3 g01010952

5. Remove bolt (9) and move linkage (10) out of the way.

2 of 3 11/15/2017 2:19 PM
CS-533E CP-533E Vibratory Compactor ASL00001-UP (MACHINE)... https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?retur...

6. Disconnect three hose assemblies (11) from propel pump (12) .

Illustration 4 g01010954

Illustration 5 g01010956

7. Attach a suitable lifting device and Tooling (A) to propel pump (12). Remove bolts (13) and remove
propel pump (13) from the machine. The weight of the propel pump is approximately 46 kg (102 lb).

Copyright 1993 - 2017 Caterpillar Inc. Wed Nov 15 2017 14:19:04 GMT+0900 (Tokyo Standard Time)
All Rights Reserved.
j210ms4
Private Network For SIS Licensees.

3 of 3 11/15/2017 2:19 PM

You might also like