This document provides technical information on WW70S-2 steel welding wire, including its alloy composition and conformance to AWS A5.18 and ASME SFA A5.18 standards. It lists the AWS chemical composition requirements and recommended weld parameters for short arc and spray arc welding processes using this wire. Typical deposited chemical composition and all weld metal properties for strength, yield strength, elongation, and charpy-v-notch impact are also provided. The document concludes by stating the wire is for TIG and MIG welding applications and recommends shielding gases and filler metal diameters for each process.
This document provides technical information on WW70S-2 steel welding wire, including its alloy composition and conformance to AWS A5.18 and ASME SFA A5.18 standards. It lists the AWS chemical composition requirements and recommended weld parameters for short arc and spray arc welding processes using this wire. Typical deposited chemical composition and all weld metal properties for strength, yield strength, elongation, and charpy-v-notch impact are also provided. The document concludes by stating the wire is for TIG and MIG welding applications and recommends shielding gases and filler metal diameters for each process.
This document provides technical information on WW70S-2 steel welding wire, including its alloy composition and conformance to AWS A5.18 and ASME SFA A5.18 standards. It lists the AWS chemical composition requirements and recommended weld parameters for short arc and spray arc welding processes using this wire. Typical deposited chemical composition and all weld metal properties for strength, yield strength, elongation, and charpy-v-notch impact are also provided. The document concludes by stating the wire is for TIG and MIG welding applications and recommends shielding gases and filler metal diameters for each process.
Alloy: ER70S-2 Weld Process: Mig and Tig Welding Process
AWS Chemical Composition Requirements Recommended Weld Parameters
C = 0.07 max Ni = 0.15 max Cu = 0.50 max SHORT ARC Mn = 0.90 – 1.40 Cr = 0.15 max Ti = 0.05 – 0.15 Diameter Volts Amps IPM Si = 0.40 – 0.70 Mo = 0.15 max Zr = 0.02 – 0.12 .030 16 – 18 75 – 125 176 – 324 P = 0.025 max V = 0.03 max Al = 0.05 – 0.15 .035 15 – 18 100 – 160 132 – 228 S = 0.035 max .045 17 – 18 160 – 220 149 - 208
Deposited Chemical Composition % (Typical) SPRAY ARC
C = 0.05 P = 0.012 Al = 0.09 Diameter Volts Amps IPM
Yield Strength 62,000psi Elongation 24% Application Type ER70S-2 is a triple deoxidized steel welding wire for tig and mig welding applications. For Mig welding use Carbon Dioxide or Argon + Co2 or Argon Deposited Charpy-V-Notch Impact Properties % + 2% Oxygen as shielding gases. 45 ft. lbs. (at -20ºF) For Tig welding use 100% Argon.
If additional information is needed Contact Weldwire Company, Inc. 800-523-1266
Oxy-Acetylene Welding and Cutting: Electric, Forge and Thermit Welding together with related methods and materials used in metal working and the oxygen process for removal of carbon