Professional Documents
Culture Documents
ReiriOffice Touch Setup Procedures - V10
ReiriOffice Touch Setup Procedures - V10
ReiriOffice Touch Setup Procedures - V10
Setup Procedures
BRC1E Series
1 2 3
10 CUs
D1[+] D1[-] X7A
To OUT/D unit
RS485 F1 | F2
LAN cable
DCPF04 A[+] B[-]
ReiriOffice Touch
To IN/D unit
F1 | F2
Modbus TCP/IP
Router LAN cable
200m
F1 | F2
10 CUs
D2[+] D2[-]
(Port 2) A[+] B[-] Max 64 indoor units
DCPF04 1st card
200m RS485
USB Type-A USB Type-A
LAN cable
Modbus 10 CUs
TCP/IP 2nd card
A[+] B[-] Max 64 indoor units
LAN
Router cable
Add 2
Max 64 indoor
10 CUs
units
WAGO I/O System D-Mobile adaptor 4th card
Internet
(10 nodes) (Max 50) ASEAN Oceania Training Centre 9
2.1.7 ReiriOffice Touch Overview DCPF04 : Preparation
A B C D E F
- + - +
LABEL DESCRIPTION
A USB Type A port (2.0)
USB Type A port (2.0) - the priority port is indicated
B
by a round sticker
C Micro SD card port
D LAN Port (1 GbE Speed LAN)
E RS485, 6 pin terminal block connectors
F USB Type C connector, 5V DC power input
ASEAN Oceania Training Centre 10
2.1.8 ReiriOffice Touch Overview DCPF04 : Preparation
E D2 D1
A B C D E F - + - +
- + - +
Polarity as shown
on the sticker.
LABEL DESCRIPTION
The priority port is indicated
A USB Type A port (2.0) by a round sticker.
USB Type A port (2.0) - the priority port is indicated Note:
B
by a round sticker
• Cable type: Twisted pair cables
C Micro SD card port • Cable thickness: 0.25mm2 to 0.75mm2
D LAN Port (1 GbE Speed LAN) • When using a shielded cable, connect only
E RS485, 6 pin terminal block connectors one end of it to the ground.
• The maximum wiring distance must be kept at
F USB Type C connector, 5V DC power input 200m
ASEAN Oceania Training Centre 11
ReiriOffice Touch (DCPF04)
3. Reiri Setup Tool
(Setup Workflow)
STEP 1 STEP 6
Download Reiri Setup Tool App Setup Activator User Account
STEP 2
STEP 7
Open Reiri Setup Tool App and connect to
Activate Reiri Controller
the Reiri Controller
STEP 3 STEP 8
Set up an admin account for ReiriOffice Activate / Deactivate / Delete
Touch Optional Functions
STEP 4 STEP 9
Set Reiri Controller information and Add devices to Reiri Controller for
activate cloud connection monitoring and controlling.
STEP 5 STEP 10
Set Time and Date for Reiri Controller Edit the management points attributes
AOTC
NOTE
• The Smartphone that is
running the Reiri Setup Tool
must be connected to the
same network as the
ReirOffice Touch.
AOTC
NOTE
• Once a user account is
being created, this setup
account will be removed.
F.
D.
E.
NOTE
G. • Create 2 admin accounts, one
for the client and one for the
service engineer to perform
setup and act as a backup in
case if the client forgets their
login credentials the engineer
can use its account to recover
the data.
K. Tap on Logout
L. Login to the admin account that you
had created for Service Engineer.
L.
K.
A.
B.
Remote D.
Internet
Cloud
C.
B. C.
B. B. Internet Time
Synchronization is ON as
C. default.
A.
C. Tap on Asia/Singapore to
change your Time zone.
NOTE
• Internet access must always be
available for auto time
synchronization.
B.
A.
C.
Login to Reiri Option
Distribute the created
Management System to
Username and Password
create an activator user
to the activator.
account.
Activator
(Installer)
NOTE
• The Username and Password is one-time issued and tagged to the installer. It
shall be used by that installer repeatedly to activate other controllers or options for
the all sites/projects.
A.
C.
ASEAN Oceania Training Centre 28
3.9 Scan Option Key QR code DCPF04 : Setup Workflow
NOTE D.
• There are 2 scenarios where the
Licence key cannot be tapped. First,
if the Reiri controller already have C. Upon succession, the License key will be
the same option installed and displayed in the List of Options Available.
second, if the option is not Next, tap on the License key.
supported by that Reiri controller.
D. A confirmation dialogue will be prompted,
tap on OK to confirm. E.
E. The activated option will show its Model
name in the Activated Options.
C.
D.
C.
C.
A.
D.
ASEAN Oceania Training Centre 31
3.9.3 Removal of Options DCPF04 : Setup Workflow
E.
NOTE
• Removal of any options is only recommended if it has been mistakenly activated
D. on the wrong Reiri controller or when the existing Reiri controller needs to be
replaced.
NOTE
• Reboot the Reiri once the device
connection settings are done.
ASEAN Oceania Training Centre 33
3.11 DCPA01 DCPF04 : Setup Workflow
Add 1 To X37A
X1A
Power supply
Add 2
Max 64 indoor
10 CUs units
3rd card
RS485 port (Total 256 indoor units)
Add 1 To X37A
X1A
Power supply
To IN/D
To OUT/D unit
X7A unit F1 | F2
F1 | F2
10 CUs
Add 2
Max 64 indoor
10 CUs
units
4th card
ASEAN Oceania Training Centre 34
3.11.1 DCPA01 DCPF04 : Setup Workflow
Add 1 Add 2
Add 1 Add 2
RS485 port
2nd card 4th card
1st card
Add 2
Add 2
RS485 USB
converter
[D1+] [D1-]
(Port 1)
Add 1
Add 2
Add 2
RS485 USB
converter
[D1+] [D1-]
(Port 1)
Add 1
Add 2
Add 2
[D1+] [D1-]
(Port 1)
Add 1
[D2+] [D2-]
(Port 2)
Add 2
A.
D.
C. Go to Reiri Controller setting
and enter the User and
Password of the Service Class
Account that was created by the B. The ReriOffice
ReiriOffice administrator. D. administrator
creates a Service
User Class
account for each
192.168.1.179 ReiriOffice Touch.
D.
B.
C.
D. This allows the users on each
respective floor to monitor and control
the VRV indoor units from their own
ReiriOffice Touch
A.
NOTE
• The D-mobile has to be paired to the client’s network first using WPS (Wi-
Fi Protected Setup) method or D-Mobile App.
• D-mobile has to be connected to the same network as ReiriOffice Touch
A.
A.
B.
NOTE
• Admin User Class has full access right.
• Service User Class access right to the management
points can be selectively assigned by Admin User
Class.
C.
D.
NOTE
• When ReiriOffice Touch is used as a floor controller, ReiriOffice administrator
registers a Service Class Account for each ReiriOffice Touch to allow the monitoring
and control of each individual floor’s AC equipment and management points.
ASEAN Oceania Training Centre 47
4.1.3 Add Service User Class Account DCPF04 : Optional Settings
D.
PM2.5 Value PM2.5 Value
NOTE
• Admin User Class can assign management points to
Service User Class.
• Maximum 80 accounts can be created.
ASEAN Oceania Training Centre 48
4.1.4 Modify Service User Account DCPF04 : Optional Settings
H.
I.
G.
G. Tap on Modify service User
Account to edit existing Service
User Class.
H. Tap on the username that you
want to modify.
I. Add or remove the points by
tapping the Point name to select
or unselect.
K. Equal Rights
NOTE
J. • Admin User Class accounts share
equal rights to
• Add / Delete Admin user class
accounts.
• Add / Edit / Delete Service user
class accounts
L. M.
B.
C.
A. Tap on Change
Password
B. Enter the new Password
and re-enters it again to C. Tap on OK once.
confirm.
A.
A.
B.
DCPF04
ReiriOffice Touch
B.
LAN cable
Internet
NOTE
• Connection Type and Connection Mode are set at Wired and Auto respectively by default hence no changes is
required unless other settings options is preferred.
C.
DCPF04
ReiriOffice Touch
D.
Internet
G.
NOTE
• Recipient email is set on the ReiriOffice App.
• Turn ON Less secure app access.
ASEAN Oceania Training Centre 57
4.3 Bill Header Settings DCPF04 : Optional Settings
A.
NOTE
• Only logo image in PNG format is
accepted.
2. • Input the information of the
tenant (1.) and owner (2.) using
the ReiriOffice app.
ASEAN Oceania Training Centre 59
4.3.2 PPD Settings DCPF04 : Optional Settings
B.
A.
A.
C. E.
D.
NOTE
• Model and Capacity of indoor
units are auto detected and then
autofill. When autofill doesn’t
work, entry the field information
manually.
ASEAN Oceania Training Centre 62
4.3.5 PPD Settings DCPF04 : Optional Settings
F. Tap on Select Capacity
G. A list of the capacity is shown,
choose the matching model based
on the indoor units’ equipment list.
G.
F.
NOTE
• After setting the model and capacity for
one indoor unit, the system will
automatically scan the rest of the indoor
units with the same model and capacity
to perform auto input. This reduces the
time taken to repeat the same input.
ASEAN Oceania Training Centre 63
4.3.6 PPD Settings DCPF04 : Optional Settings
(3)
D1[+]D2[-] Port 1
(3)
(2)
AC-dcpa1: (1)
1-00001 AC-dcpa2:
1-00001 (2)
(4)
AC-dcpa1: (3)
1-00002 AC-dcpa2:
1-00002 (4)
ASEAN Oceania Training Centre 65
4.3.8 PPD Settings DCPF04 : Optional Settings
K.
J. After the PPD group is
being saved successfully,
proceed to start the PPD
calculation. Tap on
Stopped to change the
calculating state.
B.
IP:192.168.1.70
DCPF04
ReiriOffice Touch
LAN cable
A. Reboot controller is to
force the controller to
restart. This is to
apply the settings or
configurations
changes made to the
Reiri controllers.
Wireless Router
SSID: AOTC
Password: 123
IP: 192.168.1.1 Internet A.