This document provides a bill of materials and dimensional data for a lift cylinder assembly. It lists 24 items including cylinders, rods, pistons, seals, hoses, nuts, and other components. Specifications are provided for the spring including maximum travel, load capacity, and pressure requirements. Cylinder dimensions such as internal diameter, rod diameter, and stroke are also specified.
This document provides a bill of materials and dimensional data for a lift cylinder assembly. It lists 24 items including cylinders, rods, pistons, seals, hoses, nuts, and other components. Specifications are provided for the spring including maximum travel, load capacity, and pressure requirements. Cylinder dimensions such as internal diameter, rod diameter, and stroke are also specified.
This document provides a bill of materials and dimensional data for a lift cylinder assembly. It lists 24 items including cylinders, rods, pistons, seals, hoses, nuts, and other components. Specifications are provided for the spring including maximum travel, load capacity, and pressure requirements. Cylinder dimensions such as internal diameter, rod diameter, and stroke are also specified.
CYLINDER END CAP 9 7 P/N: LCR105-S1 SPRING HOUSING WELDMENT 8 P/N: LCR4001 A: 3 1/2" x 3/4" (Welded to Spring Housing) P/N: LC4002-S1 B: 1 1/4" 13 C: 5" D: 29" E: 40 1/4" F: 78" 3 G: 5 5/16" 2 15 1 C B B SEE DETAIL “A” 6 SPRING SEE DETAIL “B” P/N: LCR4003 20 E D SPRING HOUSING END CAP P/N: LC101-S3 F L SEAL KIT P/N: ASAP100 BILL OF MATERIALS SPECIFICATIONS - B Item Qty. Description P/N MAXIMUM SPRING TRAVEL (PRELOAD TO SOLID) 5.449 in. 1 1 HYD/AIR CYLINDER BARREL LCR105 AVAILABLE SPRING TRAVEL AFTER PICKING UP TONG 2 1 CYLINDER ROD WELDMENT LCR112 (LOADED HEIGHT TO SOLID) 3.00 in. 3 1 PISTON LCR106 22 17 MAXIMUM ALLOWABLE LOAD L 4 1 WEARBAND W25000500 24 (SPRING FULLY COMPRESSED) 7,908 lbs. L 5 1 POLYPACK 2 1/8" x 2 1/2" x 3/16" 18702125 PRESSURE REQUIRED TO LIFT MAXIMUM ALLOWABLE LOAD 2,519 psi 6 1 1"-12 SLOTTED HEX NUT 1209 16 7 1 1/2" FLUSH PLUG W/ 1/8" ORIFICE 1657 MAXIMUM ALLOWABLE INTERNAL PRESSURE 3,000 psi
8 1 1/2" HALF COLLAR 1380 CYLINDER I.D. 2.50 in.
9 1 1/2" x 120" HOSE ASSY. MNPT x FJIC SWVL LCR107-A ROD O.D. 1.50 in. 13 10 1 3/8" MNPT x 1/2" MJIC ADAPTER 1466 18 STROKE 34.94 in. 11 1 3/8" STREET EL W/ORIFICE LCR109 19
12 --- ---------- ----------
13 1 GLAND CAP LCR119 3 21 14 --- ---------- ---------- 15 2 1/4"-20 x 3/8" SET SCREW 1015 DETAIL “A” L 16 1 O RING 2 7/8"ID, 3 1/4"OD, 3/16"W 2-336 SCALE: 3X 4 L 17 1 POLYPACK 1 1/2" x 1 7/8" x 3/8" 18701500-375 5
L 18 1 O RING 2"ID, 2 1/4"OD, 1/8"W 2-226
19 1 INTERNAL SNAP RING (N-1300-225) 1947 DETAIL “B” 20 1 1/4" x 1 1/2" ROLL PIN 1008-A L 21 1 O RING 1"ID, 1 1/4"OD, 1/8"W 2-214 SCALE: 3X L 22 1 SEAL NP CR14938 CR14938 23 1 QUICK DISCONNECT 1/2" FEMALE SNAPTITE 1430 LIFT CYLINDER 4225 HWY. 90 EAST BROUSSARD, LA 70518 24 1 GLAND LCR113 (318) 837-8847 ASSEMBLY THIS DOCUMENT IS THE PROPERTY OF SUPERIOR MANUFACTURING & 02/18/03 HYDRAULICS AND IS CONSIDERED CONFIDENTIAL. THIS INFORMATION LOG # DATE MAY NOT BE USED, DISCLOSED, COPIED, OR REPRODUCED IN ANY REV. # FORM, WITHOUT THE EXPRESS WRITTEN CONSENT OF SUPERIOR REF: P:\Manuals\Equip Manuals\Dwgs\ ASSEMBLY NUMBER LCR400-A MANUFACTURING & HYDRAULICS. LCR\LCR400-A.wpg