Professional Documents
Culture Documents
Hitachi FOUNDRY MASTER Smart Determination of Nickel Alloys
Hitachi FOUNDRY MASTER Smart Determination of Nickel Alloys
Hitachi FOUNDRY MASTER Smart Determination of Nickel Alloys
FOUNDRY-MASTER Smart
Determination of Nickel Alloys
Convenient, reliable, flexible metal analysis for foundries, steel works and
secondary smelters.
APPLICATION NOTE – OESAN-44-V1
FOUNDRY-MASTER Smart
Determination of Nickel Alloys
This application note describes the analysis of Nickel based metals and alloys
at best analytical performance with the FOUNDRY-MASTER Smart.
The data presented in this application note demonstrates that the FOUNDRY-
MASTER Smart provides repeatable and accurate results within seconds for
the cost-effective determination of Copper alloys and material identification.
Ni alloys cover an extremely wide range from pure metal to the heat- and
chemical resistant alloys for turbines and chemical plants. The FOUNDRY-
MASTER Smart allows the measurement of high Ni, Cr and Fe alloyed
materials (Superalloys) and of course special alloys e.g. with high Cu, Mo or Co
concentrations. Virtually every Ni alloy can be measured accurately on-site with
this versatile instrument.
Sample Preparation
It is necessary to grind, lathe or mill the specimens because the measurements
are conducted with spark excitation in argon. For maximum precision we
recommend to lathe or mill Copper alloys, grinding might cause cross effects
between samples. All coatings have to be carefully removed from the surface.
Although a set of adapters allow the measurement on irregular surfaces the
results presented in this application note can only be obtained on flat surfaces.
APPLICATION NOTE – OESAN-44-V1
FOUNDRY-MASTER Smart
Determination of Nickel Alloys
Calibration range
Ni_000 NI_100 NI_200 NI_300 NI_400 NI_500 NI_600 NI_700 Overview
Channel Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max Min Max
Al Aluminium 0.0050 8.5 0.0020 1.0 0.0050 5.0 0.0020 8.0 0.0020 0.5 0.0020 8.0 1.0000 8.0 1.0000 8.0 0.0020 8.5
B Boron 0.0005 3.3 0.0005 0.1 0.0005 0.3 0.0005 0.5 0.0005 0.5 0.0005 0.5 0.0005 0.5 0.0005 3.3
C Carbon 0.0050 1.0 0.0020 0.5 0.0030 1.0 0.0020 0.5 0.0020 0.5 0.0020 0.5 0.0020 0.5 0.0020 0.5 0.0020 1.0
Co Cobalt 0.0050 30.0 0.0020 1.0 0.0020 2.0 0.0010 22.0 0.0020 5.0 0.0020 22.0 0.0020 30.0 2.0000 15.0 0.0010 30.0
Cr Chromium 0.0020 35.0 0.0010 1.0 0.0020 1.0 10.0000 24.0 15.0000 25.0 10.0000 30.0 0.0020 25.0 4.0000 30.0 0.0010 35.0
Cu Copper 0.0030 38.0 0.0020 1.0 22.0000 38.0 0.0020 1.0 0.0020 4.0 0.0020 3.0 0.0020 2.0 0.0030 2.5 0.0020 38.0
Fe Iron 0.0050 55.0 0.0020 1.0 0.0050 3.0 0.0020 35.0 35.0000 60.0 0.0020 40.0 0.0020 25.0 0.0020 5.0 0.0020 60.0
Hf Hafnium 0.0050 2.3 0.0050 2.3 0.0050 2.3
Mg Magnesium 0.0005 0.3 0.0001 0.2 0.0005 0.3 0.0010 0.2 0.0005 0.3 0.0005 0.3 0.0005 0.3 0.0005 0.3 0.0001 0.3
Mn Manganese 0.0050 3.3 0.0020 1.0 0.0030 3.3 0.0020 1.0 0.0020 3.0 0.0020 2.0 0.0020 2.0 0.0020 1.0 0.0020 3.3
Mo Molybdenum 0.0050 40.0 0.0020 20.0 0.0020 10.0 0.0020 12.0 0.0020 40.0 0.0020 4.0 0.0020 40.0
Nb Niobium 0.0030 8.5 0.0020 1.0 0.0020 8.0 0.0030 8.0 0.0020 5.0 0.0020 2.0 0.0020 8.5
P Phosphorous 0.0030 0.1 0.0020 0.1 0.0020 0.1 0.0020 0.1
Pb Lead 0.0020 0.1 0.0020 0.1 0.0020 0.1
S Sulphur 0.0020 0.2 0.0020 0.2 0.0020 0.2 0.0020 0.2 0.0020 0.2 0.0020 0.2 0.0020 0.2 0.0020 0.2 0.0020 0.2
Si Silicon 0.0050 7.8 0.0020 0.5 0.0020 7.0 0.0020 3.0 0.0050 7.8 0.0020 1.5 0.0020 2.0 0.0020 8.0 0.0020 8.0
Sn Tin 0.0020 1.0 0.0020 1.0 0.0020 1.0 0.0020 1.0 0.0020 1.0 0.0020 1.0 0.0020 1.0
Ta Tantalum 0.0100 7.8 0.0100 7.8 0.0100 7.8
Ti Titanium 0.0030 6.5 0.0010 1.0 0.0020 2.0 0.0010 6.0 0.0030 5.0 0.0010 6.0 0.0020 5.0 0.0010 5.0 0.0010 6.5
V Vanadium 0.0030 1.2 0.0020 0.5 0.0020 1.2 0.0030 1.2 0.0030 1.2 0.0030 1.2 0.0020 1.2
W Tungsten 0.0100 13.5 0.0050 4.0 0.0150 5.0 0.0150 7.0 0.0100 13.5 0.0050 13.5
Zr Zirconium 0.0050 0.5 0.0020 0.3 0.0050 0.5 0.0050 0.5 0.0050 0.5 0.0020 0.5
Ni Nickel Internal Standard Internal Standard Internal Standard Internal Standard Internal Standard Internal Standard Internal Standard Internal Standard Internal Standard
APPLICATION NOTE – OESAN-44-V1
FOUNDRY-MASTER Smart
Determination of Nickel Alloys
Burn Ni Si Mn Cr Mo Cu Fe Co Ti Al Nb W
1 58,42 0,1582 0,0892 9,193 0,0832 0,0182 0,6706 10,17 1,699 6,665 1,241 11,12
2 58,28 0,1615 0,0901 9,158 0,0823 0,0203 0,6659 10,18 1,728 6,681 1,259 11,22
3 58,38 0,1612 0,0887 9,137 0,0817 0,0166 0,668 10,21 1,733 6,666 1,246 11,16
4 58,27 0,1561 0,0887 9,161 0,0818 0,0156 0,6717 10,21 1,699 6,663 1,227 11,29
5 58,32 0,158 0,089 9,168 0,0827 0,0171 0,6671 10,18 1,689 6,659 1,235 11,26
6 58,34 0,1598 0,0905 9,186 0,0824 0,0162 0,6724 10,21 1,694 6,677 1,241 11,16
7 58,34 0,1594 0,0887 9,144 0,0831 0,0157 0,6694 10,22 1,687 6,703 1,235 11,19
8 58,24 0,1575 0,0892 9,108 0,0815 0,0164 0,6658 10,22 1,723 6,624 1,245 11,36
9 58,24 0,1567 0,0884 9,128 0,0821 0,0168 0,6663 10,26 1,695 6,656 1,223 11,33
10 58,32 0,1595 0,0893 9,092 0,0824 0,016 0,673 10,25 1,705 6,653 1,247 11,25
Average 58,32 0,1588 0,0892 9,147 0,0823 0,0169 0,669 10,21 1,705 6,665 1,24 11,23
CRF 0,16 0,09 9,21 0,67 10,1 1,75 6,66 1,24 11,25
SD 0,06 0,0018 0,0007 0,032 0,0006 0,0014 0,0028 0,03 0,017 0,021 0,01 0,08
RSD 0,1 1,14 0,74 0,35 0,69 8,38 0,41 0,29 0,98 0,31 0,84 0,7
Data values in mass-% obtained on certified reference sample; here “IARM 50B Nickel 200”.
APPLICATION NOTE – OESAN-44-V1
FOUNDRY-MASTER Smart
Determination of Nickel Alloys
Burn V C P S Sn Hf Mg Ta Zr B Pb
1 0,0294 0,1225 0,0081 0,0123 0,0096 0,024 <0,0005 <0,01 0,0456 0,0122 <0,005
2 0,0304 0,121 0,0085 0,0128 0,0101 0,024 <0,0005 <0,01 0,0489 0,0129 <0,005
3 0,0306 0,117 0,009 0,0128 0,0101 0,024 <0,0005 <0,01 0,0472 0,0125 <0,005
4 0,0301 0,1189 0,009 0,013 0,0098 0,024 <0,0005 <0,01 0,0441 0,0121 <0,005
5 0,0307 0,1187 0,0094 0,0134 0,0098 0,024 <0,0005 <0,01 0,0466 0,0122 <0,005
6 0,0298 0,121 0,0091 0,0126 0,0097 0,024 <0,0005 <0,01 0,0473 0,0121 <0,005
7 0,0312 0,113 0,0095 0,0132 0,01 0,024 <0,0005 <0,01 0,0467 0,012 <0,005
8 0,0312 0,1263 0,0102 0,0132 0,01 0,024 <0,0005 <0,01 0,046 0,0119 <0,005
9 0,0316 0,1165 0,01 0,0137 0,0099 0,024 <0,0005 <0,01 0,0469 0,0122 <0,005
10 0,0313 0,1189 0,0101 0,0131 0,0099 0,024 <0,0005 <0,01 0,0469 0,0121 <0,005
Average 0,0306 0,1194 0,0093 0,013 0,0099 0,024 <0,0005 <0,01 0,0466 0,0122 <0,005
Data values in mass-% obtained on certified reference sample; here “IARM 50B Nickel 200”.
APPLICATION NOTE – OESAN-44-V1
FOUNDRY-MASTER Smart
Determination of Nickel Alloys
Burn Ni Si Mn Cr Mo Cu Fe Co Ti Al Nb W
1 64,78 0,1045 0,9413 0,314 0,0433 31,88 1,585 0,0287 0,0509 <0,005 0,0144 0,0434
2 64,86 0,105 0,9425 0,3131 0,0427 31,82 1,59 0,0286 0,0481 <0,005 0,0141 0,0302
3 64,77 0,1057 0,9378 0,3159 0,0432 31,91 1,59 0,0281 0,0482 <0,005 0,0141 0,0296
4 64,73 0,1052 0,9375 0,3159 0,0432 31,96 1,591 0,028 0,0488 <0,005 0,0132 0,0308
5 64,84 0,105 0,9405 0,3136 0,0426 31,85 1,59 0,0274 0,0476 <0,005 0,0129 0,0275
6 64,87 0,1053 0,9425 0,3153 0,0424 31,81 1,594 0,0276 0,0485 <0,005 0,0132 0,0254
7 64,71 0,1045 0,9479 0,314 0,042 31,97 1,589 0,0273 0,0479 <0,005 0,0123 0,0286
8 64,78 0,1053 0,9482 0,3148 0,0429 31,89 1,589 0,0277 0,0486 <0,005 0,0126 0,03
9 64,83 0,1054 0,938 0,3161 0,0429 31,85 1,598 0,0275 0,0494 <0,005 0,0124 0,0253
10 64,77 0,1056 0,9441 0,316 0,0425 31,91 1,591 0,0278 0,048 <0,005 0,0127 0,0291
Average 64,79 0,1052 0,942 0,3149 0,0428 31,88 1,591 0,0279 0,0486 <0,005 0,0132 0,03
CRF 0,105 1,01 0,32 0,043 31,7 1,6 0,029 0,05 0,004 (<0,01) (<0,01)
SD 0,05 0,0004 0,0039 0,0011 0,0004 0,0542 0,0034 0,0005 0,001 0,0008 0,0051
RSD 0,08 0,39 0,41 0,36 0,96 0,17 0,21 1,72 1,97 5,76 16,95
Data values in mass-% obtained on certified reference sample; here “IARM 51B Monel 400”.
APPLICATION NOTE – OESAN-44-V1
FOUNDRY-MASTER Smart
Determination of Nickel Alloys
Burn V C P S Sn Hf Mg Ta Zr B Pb
1 0,0071 0,1594 0,0114 <0,003 <0,005 <0,005 0,0138 <0,01 <0,005 0,0033 0,0122
2 <0,005 0,1595 0,0118 <0,003 <0,005 <0,005 0,0137 <0,01 <0,005 0,0033 0,0097
3 <0,005 0,1605 0,0111 <0,003 <0,005 <0,005 0,0143 <0,01 <0,005 0,0032 0,009
4 <0,005 0,1576 0,0113 <0,003 <0,005 <0,005 0,0146 <0,01 <0,005 0,003 0,0096
5 <0,005 0,1591 0,0113 <0,003 <0,005 <0,005 0,0142 <0,01 <0,005 0,0031 0,0088
6 <0,005 0,1593 0,0119 <0,003 <0,005 <0,005 0,0144 <0,01 <0,005 0,0032 0,0092
7 <0,005 0,159 0,0113 <0,003 <0,005 <0,005 0,0153 <0,01 <0,005 0,003 0,0095
8 <0,005 0,1594 0,0109 <0,003 <0,005 <0,005 0,016 <0,01 <0,005 0,003 0,0097
9 <0,005 0,1601 0,0114 <0,003 <0,005 <0,005 0,0152 <0,01 <0,005 0,003 0,0094
10 <0,005 0,1596 0,012 <0,003 <0,005 <0,005 0,0139 <0,01 <0,005 0,0033 0,0099
Average <0,005 0,1594 0,0114 <0,003 <0,005 <0,005 0,0145 <0,01 <0,005 0,0031 0,0097
Data values in mass-% obtained on certified reference sample; here “IARM 51B Monel 400”.
APPLICATION NOTE – OESAN-44-V1
FOUNDRY-MASTER Smart
Determination of Nickel Alloys
Burn Ni Si Mn Cr Mo Cu Fe Co Ti Al Nb W
1 61,74 0,0811 0,0503 21,62 9,509 0,1097 2,318 0,2834 0,2138 0,37 3,524 0,1125
2 61,77 0,0817 0,0504 21,61 9,444 0,1108 2,317 0,283 0,2113 0,3699 3,561 0,1108
3 61,79 0,0818 0,051 21,56 9,496 0,111 2,327 0,2844 0,2116 0,3723 3,528 0,1117
4 61,62 0,0845 0,0504 21,39 9,733 0,1137 2,311 0,2917 0,2142 0,3762 3,607 0,1155
5 61,7 0,0831 0,0507 21,47 9,618 0,111 2,319 0,288 0,2147 0,3711 3,583 0,1136
6 61,74 0,0832 0,0502 21,29 9,76 0,1126 2,319 0,2863 0,2149 0,3724 3,575 0,1119
7 61,69 0,0842 0,0506 21,38 9,702 0,1128 2,318 0,2921 0,2128 0,3746 3,595 0,1111
8 61,8 0,0819 0,0508 21,54 9,493 0,1102 2,313 0,2842 0,2099 0,3719 3,544 0,1128
9 61,72 0,0822 0,0507 21,53 9,565 0,1113 2,312 0,2812 0,2154 0,3712 3,563 0,1116
10 61,65 0,0852 0,0507 21,39 9,72 0,1128 2,307 0,2867 0,2199 0,3731 3,613 0,1131
Average 61,72 0,0829 0,0506 21,48 9,604 0,1116 2,316 0,2861 0,2139 0,3723 3,569 0,1125
CRF 0,083 0,051 21,64 9,43 0,11 2,32 0,29 0,21 0,37 3,55 0,12
SD 0,06 0,0014 0,0002 0,11 0,118 0,0013 0,006 0,0036 0,0028 0,002 0,031 0,0014
RSD 0,09 1,66 0,49 0,52 1,22 1,17 0,24 1,27 1,3 0,53 0,87 1,23
Data values in mass-% obtained on certified reference sample; here “IARM 54B Inco 625”.
APPLICATION NOTE – OESAN-44-V1
FOUNDRY-MASTER Smart
Determination of Nickel Alloys
Burn V C P S Sn Hf Mg Ta Zr B Pb
1 0,0107 0,0236 0,006 <0,003 <0,005 <0,005 0,0033 <0,01 0,0234 0,0021 <0,005
2 0,011 0,0235 0,006 <0,003 <0,005 <0,005 0,0029 <0,01 0,0237 0,0021 <0,005
3 0,0112 0,0232 0,0064 <0,003 <0,005 0,0054 0,0034 <0,01 0,0234 0,0022 <0,005
4 0,0116 0,0225 0,006 <0,003 <0,005 0,0064 0,0036 <0,01 0,0241 0,002 <0,005
5 0,0108 0,0233 0,0069 <0,003 <0,005 0,006 0,003 <0,01 0,0239 0,0021 <0,005
6 0,0112 0,0242 0,007 <0,003 <0,005 0,0064 0,003 <0,01 0,0235 0,0021 <0,005
7 0,0106 0,0234 0,0069 <0,003 <0,005 0,0065 0,0033 <0,01 0,0239 0,0022 <0,005
8 0,0114 0,0259 0,0075 <0,003 <0,005 <0,005 0,0034 <0,01 0,024 0,0021 <0,005
9 0,0109 0,025 0,0079 <0,003 <0,005 <0,005 0,0035 <0,01 0,0238 0,0021 <0,005
10 0,0111 0,0237 0,0078 <0,003 <0,005 0,0061 0,0033 <0,01 0,0241 0,0021 <0,005
Average 0,0111 0,0238 0,0068 <0,003 <0,005 0,0055 0,0033 <0,01 0,0238 0,0021 <0,005
Data values in mass-% obtained on certified reference sample; here “IARM 54B Inco 625”.
APPLICATION NOTE – OESAN-44-V1
FOUNDRY-MASTER Smart
Determination of Nickel Alloys
Burn Ni Si Mn Cr Mo Cu Fe Co Ti Al Nb W
1 56,72 0,3621 0,1259 10,34 3,183 0,0223 1,024 14,91 5,761 6,942 0,0481 <0,015
2 56,66 0,3651 0,1251 10,36 3,22 0,0217 1,024 14,94 5,744 6,935 0,0472 <0,015
3 56,69 0,3655 0,1259 10,35 3,175 0,0228 1,028 14,93 5,781 6,93 0,049 <0,015
4 56,72 0,3577 0,125 10,32 3,199 0,0224 1,03 14,95 5,749 6,921 0,0468 <0,015
5 56,69 0,3601 0,1255 10,32 3,164 0,0222 1,036 14,96 5,804 6,913 0,0482 <0,015
6 56,63 0,3718 0,126 10,35 3,158 0,0223 1,027 14,93 5,799 6,972 0,0516 <0,015
7 56,72 0,3675 0,1258 10,33 3,191 0,0226 1,03 14,96 5,755 6,882 0,0507 <0,015
8 56,64 0,3739 0,126 10,36 3,236 0,0224 1,031 14,97 5,732 6,892 0,0479 <0,015
9 56,67 0,3614 0,1266 10,37 3,199 0,022 1,029 14,98 5,687 6,949 0,0481 <0,015
10 56,63 0,3688 0,1268 10,33 3,187 0,022 1,03 14,98 5,768 6,956 0,0481 <0,015
Average 56,68 0,3654 0,1259 10,34 3,191 0,0223 1,029 14,95 5,758 6,929 0,0486 <0,015
SD 0,04 0,0052 0,0006 0,02 0,024 0,0003 0,004 0,02 0,034 0,028 0,0015
RSD 0,06 1,42 0,45 0,17 0,75 1,42 0,34 0,16 0,59 0,4 3,08
Data values in mass-% obtained on certified reference sample; here “MBH 11775 G”.
APPLICATION NOTE – OESAN-44-V1
FOUNDRY-MASTER Smart
Determination of Nickel Alloys
Burn V C P S Sn Hf Mg Ta Zr B Pb
1 0,4749 <0,002 <0,005 0,0147 0,0069 <0,005 <0,0005 <0,01 0,0603 <0,001 <0,005
2 0,4742 <0,002 <0,005 0,0147 0,0068 <0,005 <0,0005 <0,01 0,062 <0,001 <0,005
3 0,4764 <0,002 <0,005 0,0152 0,0067 <0,005 <0,0005 <0,01 0,0603 <0,001 <0,005
4 0,4748 <0,002 <0,005 0,0155 0,0069 <0,005 <0,0005 <0,01 0,0584 <0,001 <0,005
5 0,4768 <0,002 <0,005 0,0161 0,0067 <0,005 <0,0005 <0,01 0,059 <0,001 <0,005
6 0,4764 <0,002 <0,005 0,0162 0,0068 <0,005 <0,0005 <0,01 0,0627 <0,001 <0,005
7 0,48 <0,002 <0,005 0,0158 0,007 <0,005 <0,0005 <0,01 0,0615 <0,001 <0,005
8 0,4775 <0,002 <0,005 0,0165 0,0067 <0,005 <0,0005 <0,01 0,0652 <0,001 <0,005
9 0,474 <0,002 <0,005 0,0156 0,0067 <0,005 <0,0005 <0,01 0,0601 <0,001 <0,005
10 0,4745 <0,002 <0,005 0,0158 0,0069 <0,005 <0,0005 <0,01 0,0618 <0,001 <0,005
Average 0,4759 <0,002 <0,005 0,0156 0,0068 <0,005 <0,0005 <0,01 0,0611 <0,001 <0,005
Data values in mass-% obtained on certified reference sample; here “MBH 11775 G”.
APPLICATION NOTE – OESAN-44-V1
FOUNDRY-MASTER Smart
Determination of Nickel Alloys
Burn Ni Si Mn Cr Mo Cu Fe Co Ti Al Nb W
1 40,34 0,24 0,4529 21,02 3,062 2,534 30,94 0,0528 0,9825 0,1834 0,0255 <0,015
2 39,95 0,229 0,4521 21,17 3,036 2,472 31,35 0,0483 0,9542 0,1799 0,023 <0,015
3 40,24 0,2336 0,4538 21,12 3,038 2,537 31 0,0485 0,97 0,1847 0,0235 <0,015
4 40,32 0,2359 0,4545 21,24 3,071 2,52 30,81 0,048 0,9734 0,1836 0,0234 <0,015
5 40,25 0,2357 0,4534 21,22 3,058 2,518 30,92 0,049 0,964 0,1823 0,0229 <0,015
6 40,33 0,237 0,4541 21,23 3,064 2,526 30,8 0,0494 0,9693 0,1826 0,0234 <0,015
7 40,28 0,2354 0,4558 21,16 3,06 2,532 30,92 0,0484 0,9696 0,1835 0,0244 <0,015
8 40,25 0,23 0,4521 21,12 3,05 2,479 31,09 0,0478 0,9497 0,1766 0,0234 <0,015
9 40,39 0,2373 0,4544 21,15 3,065 2,525 30,81 0,0494 0,9678 0,1811 0,0248 <0,015
10 40,32 0,2357 0,4562 21,2 3,056 2,519 30,85 0,0482 0,9598 0,1855 0,0238 <0,015
Average 40,27 0,235 0,4539 21,16 3,056 2,516 30,95 0,049 0,966 0,1823 0,0238 <0,015
CRF 0,23 0,45 21,2 3,05 2,48 31,25 0,049 0,96 0,18 -0,005 -0,012
SD 0,12 0,0033 0,0014 0,07 0,011 0,022 0,17 0,0015 0,0095 0,0026 0,0008
RSD 0,3 1,41 0,31 0,31 0,38 0,89 0,54 2,96 0,99 1,42 3,51
Data values in mass-% obtained on certified reference sample; here “IARM 59B Alloy 825”.
APPLICATION NOTE – OESAN-44-V1
FOUNDRY-MASTER Smart
Determination of Nickel Alloys
Burn V C P S Sn Hf Mg Ta Zr B Pb
1 0,0502 0,0333 0,0111 0,0035 <0,005 <0,005 <0,0005 0,0586 <0,005 <0,001 0,0095
2 0,0466 0,0311 0,0103 <0,003 <0,005 <0,005 <0,0005 0,0358 <0,005 <0,001 0,0061
3 0,0477 0,0341 0,0106 <0,003 <0,005 <0,005 <0,0005 0,048 <0,005 <0,001 0,0065
4 0,0474 0,0321 0,0108 <0,003 <0,005 <0,005 <0,0005 0,0228 <0,005 <0,001 0,0062
5 0,0476 0,0321 0,011 <0,003 <0,005 <0,005 <0,0005 0,0265 <0,005 <0,001 0,0066
6 0,0476 0,0324 0,0113 0,0032 <0,005 <0,005 <0,0005 0,0313 <0,005 <0,001 0,006
7 0,0478 0,0322 0,0112 <0,003 <0,005 <0,005 <0,0005 0,0269 <0,005 <0,001 0,0062
8 0,0475 0,0314 0,0117 <0,003 <0,005 <0,005 <0,0005 0,0262 <0,005 <0,001 0,006
9 0,0481 0,0324 0,012 <0,003 <0,005 <0,005 <0,0005 0,0371 <0,005 <0,001 0,0066
10 0,0471 0,0325 0,0119 0,0032 <0,005 <0,005 <0,0005 0,0351 <0,005 <0,001 0,0059
Average 0,0478 0,0324 0,0112 <0,003 <0,005 <0,005 <0,0005 0,0348 <0,005 <0,001 0,0066
Data values in mass-% obtained on certified reference sample; here “IARM 59B Alloy 825”.
APPLICATION NOTE – OESAN-44-V1
FOUNDRY-MASTER Smart
Determination of Nickel Alloys
Burn Ni Si Mn Cr Mo Cu Fe Co Ti Al Nb W
1 57,61 0,0302 0,2852 21,31 13,06 0,054 3,63 0,593 <0,005 0,2837 0,0295 2,875
2 57,52 0,03 0,2859 21,29 13,18 0,0549 3,611 0,5932 <0,005 0,2867 0,0275 2,88
3 57,45 0,0298 0,2845 21,28 13,27 0,0551 3,616 0,5935 <0,005 0,2874 0,0273 2,871
4 57,59 0,029 0,2859 21,38 13,05 0,0544 3,614 0,5792 <0,005 0,2845 0,0274 2,873
5 57,51 0,0289 0,2861 21,33 13,18 0,0548 3,609 0,5835 <0,005 0,285 0,0282 2,875
6 57,5 0,0294 0,2849 21,28 13,23 0,0548 3,606 0,5918 <0,005 0,2864 0,0279 2,87
7 57,59 0,028 0,2858 21,37 13,06 0,0542 3,626 0,5712 <0,005 0,2836 0,0272 2,871
8 57,57 0,0307 0,2848 21,24 13,14 0,0539 3,633 0,5912 <0,005 0,2826 0,0299 2,893
9 57,49 0,0324 0,285 21,16 13,3 0,055 3,601 0,6124 <0,005 0,2844 0,0313 2,887
10 57,53 0,0301 0,2854 21,28 13,19 0,0545 3,624 0,5901 <0,005 0,2863 0,028 2,868
Average 57,54 0,0299 0,2854 21,29 13,17 0,0546 3,617 0,5899 <0,005 0,2851 0,0284 2,876
CRF 0,03 0,29 21,32 13,02 0,054 3,63 0,59 0,005 0,283 0,029 2,87
SD 0,05 0,0012 0,0006 0,06 0,09 0,0004 0,011 0,0108 0,0016 0,0014 0,008
RSD 0,09 3,97 0,19 0,3 0,67 0,78 0,3 1,83 0,55 4,81 0,28
Data values in mass-% obtained on certified reference sample; here “IARM 65B HAST C22”.
APPLICATION NOTE – OESAN-44-V1
FOUNDRY-MASTER Smart
Determination of Nickel Alloys
Burn V C P S Sn Hf Mg Ta Zr B Pb
1 0,1551 0,0054 0,0058 <0,003 <0,005 <0,005 0,009 0,0479 0,0054 0,0022 <0,005
2 0,1543 0,0054 0,0057 <0,003 <0,005 <0,005 0,0095 0,051 0,0053 0,0019 <0,005
3 0,1534 0,0054 0,0062 <0,003 <0,005 <0,005 0,0094 0,0438 0,0053 0,002 <0,005
4 0,1519 0,0054 0,0069 <0,003 <0,005 <0,005 0,01 0,0431 0,0053 0,0019 <0,005
5 0,1533 0,0054 0,0065 <0,003 <0,005 <0,005 0,0098 0,0456 0,0053 0,0019 <0,005
6 0,1537 0,0054 0,0066 <0,003 <0,005 <0,005 0,0095 0,044 0,0052 0,0021 <0,005
7 0,152 0,0054 0,0072 <0,003 <0,005 <0,005 0,0097 0,0413 0,0051 0,0021 <0,005
8 0,1558 0,0054 0,007 0,0034 <0,005 <0,005 0,0089 0,0565 0,0053 0,0025 <0,005
9 0,1578 0,0054 0,0067 0,0037 <0,005 <0,005 0,0086 0,0607 0,0054 0,0019 <0,005
10 0,1535 0,0054 0,0067 <0,003 <0,005 <0,005 0,0093 0,0494 0,0052 0,0022 <0,005
Average 0,1541 0,0054 0,0065 <0,003 <0,005 <0,005 0,0094 0,0483 0,0053 0,0021 <0,005
Data values in mass-% obtained on certified reference sample; here “IARM 65B HAST C22”.
APPLICATION NOTE – OESAN-44-V1
FOUNDRY-MASTER Smart
Determination of Nickel Alloys
Burn Ni Si Mn Cr Mo Cu Fe Co Ti Al Nb W
1 41,12 0,2406 1,127 28,77 4,982 1,745 14,23 3,664 0,0055 0,2619 0,7318 3,021
2 41,17 0,24 1,127 28,7 4,94 1,73 14,32 3,668 0,0051 0,2604 0,7264 3,021
3 41,21 0,2353 1,129 28,68 4,899 1,723 14,38 3,645 <0,005 0,2584 0,7215 3,019
4 41,2 0,2414 1,132 28,62 5,009 1,742 14,25 3,671 0,0053 0,2619 0,7303 3,039
5 41,12 0,2416 1,127 28,76 5,012 1,748 14,17 3,679 0,0051 0,2622 0,7284 3,045
6 41,14 0,2384 1,129 28,76 4,944 1,729 14,31 3,656 0,005 0,2627 0,7225 3,012
7 41,1 0,2412 1,131 28,74 5,046 1,753 14,17 3,684 0,0051 0,2666 0,7255 3,033
8 41,1 0,2399 1,128 28,71 5,025 1,749 14,21 3,684 0,005 0,2646 0,7283 3,05
9 41,21 0,2453 1,129 28,68 5,121 1,742 14 3,703 0,0052 0,2651 0,7351 3,063
10 41,09 0,2453 1,125 28,79 5,076 1,753 14,09 3,692 0,0055 0,2641 0,7323 3,036
Average 41,14 0,2409 1,128 28,72 5,005 1,741 14,21 3,675 0,0052 0,2628 0,7282 3,034
CRF 0,24 1,12 28,54 4,98 1,74 14,26 3,69 0,005 0,26 0,73 3,1
SD 0,05 0,003 0,002 0,05 0,067 0,011 0,11 0,017 0,0002 0,0024 0,0043 0,016
RSD 0,12 1,23 0,18 0,18 1,34 0,61 0,79 0,47 3,49 0,91 0,6 0,53
Data values in mass-% obtained on certified reference sample; here “IARM 67B Alloy G-30”.
APPLICATION NOTE – OESAN-44-V1
FOUNDRY-MASTER Smart
Determination of Nickel Alloys
Burn V C P S Sn Hf Mg Ta Zr B Pb
1 0,0523 0,0071 0,0102 <0,003 <0,005 <0,005 0,0063 0,017 <0,005 <0,001 <0,005
2 0,0524 0,0067 0,0105 <0,003 <0,005 <0,005 0,0059 <0,01 <0,005 <0,001 <0,005
3 0,052 0,0071 0,0109 <0,003 <0,005 <0,005 0,0059 0,0122 <0,005 <0,001 <0,005
4 0,0523 0,0068 0,011 <0,003 <0,005 <0,005 0,0064 0,0203 <0,005 <0,001 <0,005
5 0,0527 0,0074 0,0114 <0,003 <0,005 <0,005 0,0061 0,0198 <0,005 <0,001 <0,005
6 0,0515 0,007 0,0116 <0,003 <0,005 <0,005 0,0059 0,0168 <0,005 <0,001 <0,005
7 0,0531 0,0068 0,0115 <0,003 <0,005 <0,005 0,007 0,02 <0,005 <0,001 <0,005
8 0,0525 0,0068 0,0117 <0,003 <0,005 <0,005 0,0067 0,0182 <0,005 <0,001 <0,005
9 0,0535 0,0064 0,012 <0,003 <0,005 <0,005 0,007 0,0224 <0,005 <0,001 <0,005
10 0,0528 0,0062 0,0122 <0,003 <0,005 <0,005 0,0066 0,0181 <0,005 <0,001 <0,005
Average 0,0525 0,0068 0,0113 <0,003 <0,005 <0,005 0,0064 0,0174 <0,005 <0,001 <0,005
Data values in mass-% obtained on certified reference sample; here “IARM 67B Alloy G-30”.
APPLICATION NOTE – OESAN-44-V1
FOUNDRY-MASTER Smart
Determination of Nickel Alloys
0,001
0,005 0,0005 0,003 0,003 0,003 0,0005 0,003 0,001 0,0005 0,001 0,0002 0,003 0,0005 0,003 0,0005
0,01 0,0005 0,002 0,005 0,001 0,0005 0,002 0,001 0,001 0,001 0,001 0,0005 0,002 0,001 0,002 0,001
0,02 0,001 0,002 0,001 0,001 0,001 0,002 0,001 0,002 0,002 0,001 0,001 0,002 0,002 0,002 0,002
0,05 0,002 0,002 0,0015 0,0015 0,002 0,002 0,001 0,002 0,002 0,001 0,003 0,002 0,002 0,005 0,002
0,1 0,002 0,003 0,002 0,002 0,002 0,003 0,002 0,002 0,002 0,002 0,005 0,003 0,003
0,2 0,003 0,005 0,003 0,005 0,003 0,005 0,003 0,003 0,002 0,01 0,005
0,5 0,005 0,007 0,007 0,005 0,007 0,005 0,005 0,005 0,01 0,007
1 0,007 0,015 0,015 0,01 0,015 0,01 0,015 0,01 0,01 0,015
2 0,03 0,03 0,03 0,02 0,03 0,03 0,025 0,02 0,03 0,03
3,5 0,04 0,04 0,04 0,04 0,04 0,04 0,04 0,04 0,04
Accuracy (1 SR) in
ppm
Global 800 70 100 1200 3000 1000 2500 70 25 400 3000 1000 50 50 40
APPLICATION NOTE – OESAN-44-V1
FOUNDRY-MASTER Smart
Determination of Nickel Alloys
Element Si Sn Ta Ti V W Zr
Limit of detection
(ppm) 50 50 100 50 50 150 50
Concentration
range (%) 0,005-8 0,005-0,8 0,01-8 0,005-7 0,005-1 0,015-13,5 0,005-0,35
FOUNDRY-MASTER Smart
Determination of Nickel Alloys
The published values are averaged data from very different type of
material and should be regarded as "typical" values.
This publication is the copyright of Hitachi High-Tech Analytical Science Ltd and provides outline information only, which (unless agreed by the company in writing) may not be used,
applied or reproduced for any purpose or form part of any order or contract or regarded as the representation relating to the products or services concerned. Hitachi High-Tech Analytical
Science Ltd’s policy is one of continued improvement. The company reserves the right to alter, without notice the specification, design or conditions of supply of any product or service.
Hitachi High-Tech Analytical Science Ltd acknowledges all trademarks and registrations.