Professional Documents
Culture Documents
Aircraft Hangar Safety Checklist - Protect Your ST
Aircraft Hangar Safety Checklist - Protect Your ST
With so much focus on the advances in technology in the industry, sometimes we have to take a step back and look
at the big picture. What is the mission of the airside operations organization? To conduct ground handling and
services. But above all of that, it is to make sure that all employees, passengers, and bystanders get home safely.
The same goes for aircraft hangar operations; it behooves the organization to take aggressive steps to ensure that
the work environment is a safe one. So use an aircraft hangar safety checklist to secure this goal.
The reason using checklists is the standard is because checklists add a layer of protection against human
error, which is the leading cause of industrial accidents. If you can break the error chain, your operation will be much
safer.
Aircraft checklists must be intuitive and have a certain flow. They are designed to allow pilots and crew to move
quickly yet be a comprehensive tool in covering all areas of operation. What checklists are not is a replacement for
the full flight manual. Checklists, regardless of the application, are a supplement the governing regulation or manual.
Aircraft pilots are not the only aviation professionals who implement checklists. Maintenance technicians generally
conduct tasks using abbreviated job guides to the master system technical order. All airframes, regardless of size or
type, are supported through a series of completely comprehensive orders. These monstrous manuals quite literally
cover every single component of the aircraft, down to specifications for each nut, washer, bolt, and rivet. These
manuals are thousands upon thousands of pages in length, making them totally impractical for line maintenance.
Hence, abbreviated manuals and checklists are created. The same concept applies to aircraft hangar safety
checklists.
No matter what your position is on the team, the administrative office is where your career starts and ends. While
every nation and state has their own agencies which regulate industrial safety compliance, the premise is the same
universally.
Visual aids are a valuable reminder to stay in compliance with safety standards. Posters are an excellent tool to
quickly remind team members that safety is part of the organizational culture. It reinforces team members to
know that they have the backing of supervision in approaching other team members who are not acting in
compliance.
All aircraft hangars must have an emergency evacuation plan in place, and ensure they practice it regularly. While
it might sound juvenile and unnecessary, evacuation plans reinforced by drills create mental shortcuts for team
members to react to emergencies without panicking, so make this a point on your hangar safety checklist.
Aircraft hangars are not necessarily inherently dangerous, but they certainly have the capacity to become
dangerous. A plan to provide first aid rapidly needs to be in place in the event that an accident happens because,
despite the best-laid plans, accidents do happen in the workplace.
Finally, close the administrative loop by maintaining a log of inspections, incidents and accidents, and anything else
which is noteworthy. Over time, an accurate log will be the source of information to hone your safety program.
Remember this: your checklist is NOT the safety program; the checklist is a reflection of the safety program! A
checklist means nothing if your organization does not have an active culture of aircraft hangar safety.
Aircraft maintenance and operations involve the use of a tremendous amount and variety of caustic
chemicals. Fuel, lubricating oil, hydraulic oils, solvents, etc. The list can go on for pages.
The cornerstone of an effective HAZCOM program is maintaining a current and accurate inventory of all chemicals
on site. This is everything from fuel inventory right down to simple spray cans. You need an inventory to establish
metrics on which chemicals are used most frequently, as well as keeping tabs on what was used in reporting an
accident. Emergency responders need to know what a person was exposed to for treatment.
Located in close proximity to the chemical storage, you must provide ALL applicable material safety data sheets
(MSD). MSDs are readily available online from all suppliers, so they are very easy to come by. The MSDs should
be maintained in a yellow binder and located on a well-marked, highly visible location in plain sight and
immediately available to team members who are exposed to chemicals.
MSDs provide a technical detail of the specific composition of the substance, as well as describing the effects of
exposure and immediate treatment options.
Lockout/tagout is a universal program to reduce risks of electrical shock by shutting down and physically locking out
sources of energy and large systems. The prime example in an aircraft hangar is the ground power unit, which is
often a very powerful frequency converter.
An example where lockout/tagout is necessary would be locking out electrical power from a frequency converter
when flight control surfaces must be immobilized for inspection or repair. More repairmen than we would wish
have been crushed between flight controls when they were supposed to be locked out but were inadvertently
energized.
As mentioned, many caustic products are used in the repair, maintenance, and operation of aircraft. Inhaling noxious
fumes is extremely dangerous and has harmed a lot of workers over the generations. This is particularly important
to workers in confined spaces, such as fuel tanks and fuel cells. The fumes from a fuel tank, even after
evacuation, can overtake a person in short order.
The organization has several responsibilities to their team: they must define the proper types of respirators for
the operations conducted, they should provide medical exams, and they should provide fit testing and
training. Respirators are only as good as their seal. Respirators must be inspected regularly, and inspections must
be documented.
HANGAR SAFETY CHECKLIST POINT 5: POWERED INDUSTRIAL TRUCKS AND AIRCRAFT TUGS
This part of the checklist is very important. Trucks and tugs are big, heavy, powerful machines which have the
capability of crushing a person with little resistance.
Initial and continuing education on the operation and performance limitations of trucks and tugs is imperative. You
must stress this; operators must understand the gravity of the equipment that they operate. Aircraft hangar
owners and users should consider upgrading to a safer, more efficient type of tug if possible.
Ensure that your hangar safety checklist leads users to perform daily inspections of their trucks and tugs to
ensure they are safe for operation. This is the best way to ensure that problem areas do not get pushed aside;
keeping daily tabs on critical systems such as brakes is the best way to ensure that little problems do not become big
problems.
Issuing a sort of license card with dates and endorsements is a very good way to ensure employees have processed
through the entire training process, and are also maintaining mandated continuing education training.
While the example hangar safety checklist breaks these up into two separate areas, they are directly
connected. Personal Protection Equipment (PPE) is the ensemble of safety equipment used to keep
safe. These are safety eyeglasses, hearing protection, gloves, safety toe shoes, non-slipping soles, high-visibility
apparel, and more.
The equipment is assigned to each individual and is their responsibility to maintain, but the culture of safety is the
responsibility of the organization.
Hearing conservation is a huge priority. The industrial airport environment, whether FBO, MRO, or ground side
operations, is very loud. Jet engines and turbines are terribly destructive to hearing, and diesel tugs and GPUs are
extremely loud (all the more reason to upgrade to a modern tug).
Not only does a loss in hearing affect the quality of life of team members, but it poses an immediate safety concern
when team members cannot fully hear and process orders and communicate effectively. Aircraft hangars can still be
extremely loud, even if the door is closed and there is no diesel equipment operating inside. The best practice for a
hangar safety checklist is to encourage team members to possess hearing protection at all times and to use
it liberally.
Airline aircraft and large business jets are tall affairs which often require personnel to work on scaffolding and lifts to
access the empennage and backbone. Even the tops of the wings on wide-body jets can be over two stories
high. Falling is a very real threat in this environment, and it can kill, or at the very least injure.
Make sure that your aircraft hangar safety checklist includes inspecting fall safety equipment, both daily and
on whatever isochronal inspection cycle that regulations require. Also, make sure that the inspection checklist
includes checking scaffolding railings, and any braking systems it uses to prevent movement.
HANGAR SAFETY CHECKLIST POINT 8: FIRE PROTECTION
The chemicals which cause respiratory issues are also generally highly flammable. Couple that with the constant
exposure and close proximity to electrical power and you have a volatile condition.
Your aircraft hangar checklist needs to ensure a few things regarding fire protection:
Ensure there is the proper amount of the correct size AND classification of fire extinguishers.
Make certain that fire extinguishers are mounted properly and not blocked or obscured in any way.
Ensure all employees are training annually on the proper use of fire extinguishers.
Make sure that records of scheduled fire extinguisher inspections are readily available and updated.
If there is a fixed fire protection system, ensure it is being professionally inspected on the recommended cycle
and is in fully operational condition.
Safety is one of many responsibilities of a hangar manager. Get our free eBook on hangar management, and
learn how you can improve other areas of your daily operations, too!